RE: prop size revolution cat 36
Found a few vids of r2 hobbies boats. Seems many power my hull with twin srews. Some using dual 36/70 size motors with big narly 447 and such. Hope mine has enough sack. Though my setup seems near genesis power. Any input on these boats? Thanks again.
Posted on: 5/17/2013 6:45 AM by Author "jasburrito" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=11514099

RE: prop size revolution cat 36
I just ordered a 445 and cooling jacket. Cannot wait for boat to arrive. Any input on r2 hobbies boats? Thanks
Posted on: 5/15/2013 4:54 PM by Author "jasburrito" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=11512601

prop size revolution cat 36
After watching my buddy tear it up with his modded villian i had to make the plunge and get a boat too! I decided to get http://www.ebay.com/itm/36-RC-R-c-EP-Silver-Fox-Catamaran-Fiberglass-Epoxy-Racing-Boat-Ship-ARR-BK-O-/380641156857?pt=US_Radio_Control_Control_Line&hash=item589ffb1ef9. I have a medusa research 36/70/2300 (company bought by steve neu)(tons of power) and modded mamba max with seperate ubec to run 4s. I was thinking a x445,642?x442 sold out!. Anybody else have this boat? Driveline size? My motor has 5mm shaft? will it hook to flex shaft. Huge thanks.This is my 1st boat so any advise would be great. thanks. bbbrrraaaaaaaaaaaaaa!
Posted on: 5/15/2013 5:56 AM by Author "jasburrito" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=11512069

RE: ESM Customized P51 Mustang
Nice work.that will be a show stopper! bbbbrrrraaaaaa! http://youtu.be/AAOlbirObjQ
Posted on: 9/6/2012 5:33 AM by Author "jasburrito" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11219309

RE: Gold wing racer edge 540
Flight 3 video http://www.youtube.com/watch?v=q9-PUqg2-Dk&feature=share&list=UUwPjgJtWYlgfZDzY6uWToVg I need to add expo. Those big inch plus arms are twitchy but whatever ' cheers Bud orded the GW extra 300 after watching/ looking at my edge!
Posted on: 9/5/2012 5:50 AM by Author "jasburrito" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11218113

RE: Gold wing racer edge 540
Cannot log on from the home computers. My virus protection is telling me there is a I frame injector trying to infect. Anyways Got a chance to maiden the edge last night. On the second flight all but one of the hinges broke on 1 of the wings alerions. Really lucky to get the edge back on the ground unskaved. Just got back from lhs with 4 hs5645 servos,hinges and hinge tape. Video http://m.youtube.com/watch?v=M8Rd-dbP7RU All fixed will try to get some vid of edge hovering next. O ya all up with full tank gas 10.9 pounds on digital scale. Using two 5cell and a 4chance cell batterys. Will lose some weight when i get my life bats. Cheers Gonna try 19x6 zoar. Or should i go to 20x8?
Posted on: 9/3/2012 7:47 AM by Author "jasburrito" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11213472

jc evo 30cc start vid
found this jc evo 30 new/used, the 1st owner could not get motor started. low end needle was clogged. Looks pretty cool. Runs strong. Good pics can be found at hobby king. +s 1 nut, blue alluminum arm included,template,coolness and walboro. -s spring on choke. Spinning 18x8 zoar. Thought i would share. not alot of info found in search. but whatever vid of second start http://www.youtube.com/watch?v=9xMqgfx9btM&feature=share&list=UUwPjgJtWYlgfZDzY6uWToVg cheers
Posted on: 8/28/2012 9:49 PM by Author "jasburrito" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11209891

RE: Gold wing racer edge 540
+1 on that. Sorry i got something diff! I bought this jc 30 new/used from a guy that could not get it started. I found the low end needle was clogged. Started in 1 flip after passage was cleared. Seems to be a monster. video of second start. http://youtu.be/9xMqgfx9btM To door for 190. But what ever cheers
Posted on: 8/28/2012 4:56 PM by Author "jasburrito" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11209615

RE: Gold wing racer edge 540
thanks for the props!! Ya, they are selling the old and getting newer/better 1,s. The jc 30 looks really sweet. I like that it comes with an alluminum arm,mounting template and real walboro carb. Any ideas on how/where to mount switches? theres like no wood! video of progress http://youtu.be/SfJf8lgQ_U4 but whatever cheers
Posted on: 8/28/2012 8:54 AM by Author "jasburrito" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11209019

RE: TBM 93
I put air tool oil in retracts. That sealed the leaks. Mine came in at 27 pounds. No weight added. Zero rules the sky's. Only warbird I have seen knife edge. Control surfaces are about 3d big. Seems light for the size. Cheers
Posted on: 8/27/2012 9:44 PM by Author "jasburrito" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11208556

Gold wing racer edge 540
Saw tbm was selling these for 259 plus shipping, 304 to door. 42% off was to good of deal. It is a great model. I am gonna run a jc 30 with zoar 18x8. video http://youtu.be/eflEdG-P4VY I post vid of start of and flight too. but whatever,cheers Gone from tbm http://www.troybuiltmodels.com/items/GWRACERE540-030V3BAF.html I must have got 1 of the last 1,s!
Posted on: 8/23/2012 7:26 AM by Author "jasburrito" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11203276

RE: Toni Clark Zenoah
Great info from that site. (click on a motor) thanks
Posted on: 8/13/2012 10:00 AM by Author "jasburrito" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11191667

RE: TBM 93
No flying video yet. I will try to have a bud shoot a vid next flight. Sorry to hear about the belly rub. Yours looks great. This meatball has gotten lots of attention at events. 1st big bird event I went to a guy was trying to buy the plane from me before I was unloaded. Seems zeros are rare. Only seen 1 other all summer. Thanks for the props. Cheers. Bbbbbbbbbbbbbbbrrrrrrrrrrrrrraaaaaaaaaaaaaaaaa! O ya is this yours? Motor sounds like its ripping good. http://youtu.be/l9fvZISYceQ I can dig it. Sweet
Posted on: 8/7/2012 10:51 AM by Author "jasburrito" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11184221

RE: DLE vs 3W,DA,Zenoah even OS
I just mounted a g62 to my 91 inch zero and am loving it. Video. http://youtu.be/54mrNtunL0Y To start with spring(flip motor just past compression,then just turn back 1/2 turn.) Mines been working like a million bucks.knock on wood. the big auto stye switch is kill. (kiss) 22x10 zoar. Scared that 20x15 they,them speek of will tear my plane apart. good luck cheers (runs so good its hard to shut off)
Posted on: 8/3/2012 12:55 PM by Author "jasburrito" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11179863

RE: GT33 quits running.
Another. Seems rich engines with no load at idle will load up and stall.
Posted on: 7/30/2012 7:46 AM by Author "jasburrito" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11174423

RE: 35 or 55 DLE for 80 inch yak
I think a 35cc would work great. I have a cheezy china made 52cc spinning a 20x10 mez with lots of power for 3d on a 77inch 540. Good 30cc class motors spin 20x10 just fine. To compare my buddy has dle 55cc on a 78 inch extra. (way to much power) Prop has so much pull at idle that it seems to make it hard for him to land at times. 22x10 zoar. but whatever. biggers better.
Posted on: 7/29/2012 5:56 PM by Author "jasburrito" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11173854

RE: Red Wing, Pilot, Extreme Flight? First 3D plane.
Start with a profile
Posted on: 7/24/2012 6:00 AM by Author "jasburrito" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=11167084

RE: TBM 93
http://youtu.be/54mrNtunL0Y all up 27 pounds. Do not see this thing hovering. Got the motor mounted and running. Really digging the zenoah. I am gonna take canopy off , glue and rescrew. My balance point (cg) is were you see the blue tape! Is that an OK spot. No lead added. Any other tips? Thanks Video of motor mounted without cowl http://youtu.be/jLCqw05aix4 cheers Update I flew it 3 times today at a giant scale event. The zero dominated the skys. (low inverted passes were no sweat). I am using every bit of throw on all surfaces.
Posted on: 7/21/2012 2:40 PM by Author "jasburrito" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11162670

RE: In-cowl Muffling
Noticed my dad had 1 of his mufflers on upside down (A$$ backwards) inside a corsair cowl with no exit holes. Stacks cut off. Works great for him. Nice looking bird. cheers
Posted on: 7/20/2012 1:36 PM by Author "jasburrito" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11162748

RE: Prop position on g62 video.
http://youtu.be/Zj-bm1w5nlY Choked it for 5 flips,turned choke off. Started in 3 flips. Seems to run awsome. I'm really geeked. Cheers. My buddys never showed.
Posted on: 7/18/2012 2:38 PM by Author "jasburrito" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11160299

Prop position on g62 video.
http://youtu.be/fWPwXKjeXpw Found this g62 in my dads basement. Prob been sitting 10/20 years. It had a bennet mount on the back. I took that off and fabbed up that aluminum mount. Went to local scap yard, they ended up just giving me a nice chunk of t6 aluminum. While doing research about motor I learned that the prop should be mounted like shown in video? Not sure if I have it in the correct spot? I set both needles at 2 turns. Gonna spin a 22x10 zoar. Couple buds should be over in a few to help me get it started. Wish us luck. 91 inch tbm zero. thanks
Posted on: 7/18/2012 12:16 PM by Author "jasburrito" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11160112

RE: TBM 93
Not 3d/ just hover! High 5 to the 100 plus flights. I am hoping to fly mine at warbird events and such for years to come. Cannot wait to chase my old mans TF P51. I did all mods found in thread. (tail wheel pull pull/dremeled so it locks,put hard wood around landing gear,6mm axles. I fly 3d/freestyle.(I will use low rates) I am always looking for max throw. I saw some info about stock g62 makiing around 28 pounds thrust with good props. I was hoping my zero would be around 26. seems the fuse is 6.8, center wing, 7.5,outer wings 2.8,motor 5.1+ fuel tank,2 bat,switch,misc. Any other tips? Huge thanks. Really digging these warbirds. The craftsmanship of some of the builds in this forum are unreal. Good job guys. This guys zero video is great http://youtu.be/l9fvZISYceQ , his cockpit http://youtu.be/AvLYyHqbiME thanks,cheers Seems those vids are of the zero in pictures above? Small world. Gonna build rocket to leave.
Posted on: 7/11/2012 10:59 PM by Author "jasburrito" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11152164

RE: TBM 93
ok i decided to use four scews to hold stabs to carbon rod. Just waiting on engine mount. Gonna try to have done in a few days. I,ll post a video of maiden. Noticed there are a few diff zero builds now! heres the latest video with all surfaces moving. http://youtu.be/Z2BebkKxJZQ Seems hovering may not be to far out of reach. Have new 22x10 zoar to put on g62.
Posted on: 7/11/2012 3:07 PM by Author "jasburrito" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11151761

RE: TBM 93
video of progress http://youtu.be/xZeg6ZSzALY Mine is only 91 inches. V1, V2? have know idea! Great looking planes guys. Really like the custom paint. I got the retracks drilled tapped to 6mm all mounted up! I have really crappy instructions from tbm? I am clueless on a few steps. 1st being how do I secure the stabs to fuse. I was thinking of gluing 1 end of carbon fiber rod into 1 stab. then how do I secure other stab????( long screw into bottom of stab up??? seems like a weak idea ) Please let me know or How is it done, other kits or what page. Thanks[:D] Waiting on g62 plate mount Really digging this plane. Prob gonna take the Tme smoke system out of edge and install it in zero.[8|]
Posted on: 7/7/2012 1:25 PM by Author "jasburrito" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11146683

RE: TBM 93
Newbie to warbirds. found this kit and parts 3rd hand in my dads basement.(thanks dad.) The info in this forum is great. So many great pics. Thanks to all. I have gotten lost in this thread many times. Still trying to figure it all out. Next is to drill/tap retracks to 6mm,mount wing ( I may have ? about ),motor,servos for choke trottle ect. I'm excited about it. Thank again . Heres a video of progress and parts on my tbm zero. http://youtu.be/N76t70Qzav4 cheers to building in 120 degree garage!
Posted on: 7/6/2012 10:29 PM by Author "jasburrito" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11146117

sig ama racer video
Kids wanted to know what the rubber band was for? Had to explain every aspect of flight to them. Son and I let each kid fly Racer. Heres a vid of lil mans big flight. http://youtu.be/s5tuC8PW_5g cheers
Posted on: 5/29/2012 6:30 PM by Author "jasburrito" in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11099240

Video, Maiden Flight of pte36r, Pilot sbach
This is my buds bird. Rear exhaust is too cool. Fits sweet. Gonna be hard to buy any engine without rear exaust after seeing this. Rip snort power. He could for sure spin 3 blade prop. Spinning falcon 19x8 way fast. This setup is super light. but what ever. video http://youtu.be/ccrYr95anrM
Posted on: 10/21/2011 9:22 AM by Author "jasburrito" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10776071

os ax55 with nitromthane oxide
Extreme flight chin yak os ax55 13x4 apc 10 gallons? never hit the earth. Noticed a diff noise. Felt little funny spinning over by hand. Ran fine though. Found that the top of the rod was seized to the wrist pin in the forward position.(Hard to get off crank pin) Soaked in tranny fluid to loosen. Disasembled all parts,cleaned ect. /////Works and sounds mint again. If I did not fix it, The wrist pin would have fore out piston. (Holes in piston that wrist pin rides) but whatever Just a FYI!
Posted on: 8/31/2011 9:14 AM by Author "jasburrito" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10695092

RE: Loosing my mind - Cant start engine
+1 on sounds flooded. clean plug needles 1 1/2 out (if low needle is out lots more it will flood and not start)!!!! throttle couple clicks up, ckoke on flip till coughs choke off,throttle same,flip, let us know
Posted on: 8/24/2011 11:23 PM by Author "jasburrito" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10686132

RE: CARL GOLDBERG 77
Turnigy 52cc. http://www.hobbyking.com/hobbyking/store/__6479__52cc_Gas_engine_w_CD_Ignition_3_2kw_Overbore.html $170.00 Pretty low HP motors,but start and tune easy.They do not have reed valves as stated./// My buddy and I each have 2 of them. He,s putting 1 of his 52cc,s on a redwing 30cc mxr or mx2? They make 35/40cc good motor power. Put my bird on the digital scale today. Almost exactly 15 pounds. Gonna be more with 24oz smoke and 16oz fuel all filled. Mine was spinning that mej 20x10 at 7100 on a slow tach! Heres a close up vid of sweet mej prop and worn out zoar wood that had around 100 flights on it. http://youtu.be/QMww-8NZy5c cheers Here my buddys 14plus pound katana 78inch with 52cc hovering///he was getting 7200 fast tach/zoar 20x8 with 18 pounds fish scale thrust. http://youtu.be/nKkhVfeY_kA
Posted on: 8/24/2011 11:09 PM by Author "jasburrito" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10686088