|
RE: BVM brakes locked up ??
Hate to disagree but I really don't think there will be a problem with the wheel brakes. I've been using BVM brakes for 12 years now and I have never ever had one fail. I'm sure it will be something to do with the U.P valve. Jason
Posted on: 5/18/2013 1:37 PM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11515320
RE: JMA TOPGUN 2013 MAY 18/19
[quote]ORIGINAL: Pat Barnes Looking good! Just trying to work out how to get 2 jets into my car! [:D] [/quote] Let Jamie fly them. Suddenly they will fit...[;)]
Posted on: 5/17/2013 12:56 PM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11514474
RE: Jetcat P200SX question
Just sounds like the pump can't supply the amount of fuel needed. To prove it push a 15mm length of 4mm to the pump inlet and cut it off at 45 deg then get your BVM taxi tank and push the 6mm clear over the top, you will find it's a perfect fit. Run the engine. Five quid says it reaches full power at a lesser voltage than your 109k. Jason
Posted on: 5/17/2013 11:30 AM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11514400
RE: Soft Mounts
& airframe life would also be extended. Cheers, Jason.
Posted on: 5/16/2013 8:10 PM by Author "Jason Arnold"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11513830
RE: New ESC.
will be just like the Spin 99 etc with Jeti Box. Regards, Jason.
Posted on: 9/18/2012 3:20 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11232772
Super sport No hand over of control
on the previous flight. Regards Jason edit . believe it is an original Wren FADEC
Posted on: 9/16/2012 10:34 PM by Author "doctor jason"
in the forum "Wren Turbines USA"
http://www.rcuniverse.com/forum/fb.asp?m=11230049
RE: 150 meter rule.
bit of sky to do them nicely. Cheers, Jason.
Posted on: 9/12/2012 3:51 PM by Author "Jason Arnold"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11226562
RE: BJCraft Episode
Why does it say made in china? I thought these were made in Korea... [&:] Regards, Jason.
Posted on: 9/10/2012 4:05 AM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11223478
RE: How to rebuild a RAM 750..cause I dont know..lol
Although the case on the one here looks like steel it is actually Aluminium. I would be really surprised if they weren't all the same. Jason
Posted on: 9/10/2012 1:50 AM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11223437
RE: How to rebuild a RAM 750..cause I dont know..lol
problems with preload that have been wrote about further up the thread. Jason
Posted on: 9/9/2012 3:51 PM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11223059
RE: How to rebuild a RAM 750..cause I dont know..lol
there may have been some Wrens with the groove but no O ring. Jason
Posted on: 9/9/2012 5:49 AM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11222577
RE: How to rebuild a RAM 750..cause I dont know..lol
[quote]ORIGINAL: Vettster [quote]ORIGINAL: jason Vettster I have a Ram750 in bits here..., just some else to check while you have it in bits. Jason [/quote] Thanks Steve.. Ive been thinking about something Jason said a while back about the O rings. Ive hesitated to remove them because they look... to Canadian Tire and pic up 2 new ones. Anyone know what size and where to get them? Jason I know your
Posted on: 9/9/2012 3:37 AM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11222512
RE: How to rebuild a RAM 750..cause I dont know..lol
]http://www.jmaireland.com/hand%20static%20balancing.pdf[/link] Jason
Posted on: 9/8/2012 2:17 AM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11221524
RE: 100lbs thurst micro jet Bladon Micro Jets
Looking at the two videos it seems the engine can't self sustain which is I guess why Jaguar are back to piston engine power. Jason
Posted on: 9/7/2012 1:07 PM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11220967
RE: Contra Rotating Propeller Drive for f3a 2m Pattern Planes
Hi Brenner, I see you have a website now http://www.contradrive.com Looks like the model on the index page is on fire! [;)] Cheers, Jason.
Posted on: 9/4/2012 8:06 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11217786
RE: Source for 1100 mAh A123 cells?
Here is one I bought from Hobbyking a few weeks ago.
Posted on: 9/2/2012 3:50 PM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11214856
RE: Source for 1100 mAh A123 cells?
I have the 1100mah A123 cells from HobbyKing and they are defiantly genuine. Jason
Posted on: 9/2/2012 1:49 PM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11214725
RE: New ESC.
[quote]ORIGINAL: Rune [quote]Spin 99 or wait for the Mezon as it's lighter. [/quote] I just orderd 1 Mezon from Espirit ..last one so think they have released it [/quote] I'll be very interested to see how it goes Rune. Please let us know your thoughts when you get it and use it. Cheers, Jason.
Posted on: 9/2/2012 1:45 AM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11214191
RE: Ordered new batteries . . . we'll see . . .
[quote]ORIGINAL: serious power Jason, You are missing a point. The extra capacity also gives extra performance, relatively speaking, as the flight progresses - less % capacity used = less voltage drop !! There is no trade off. I suggest you think it through a little more. Brian [/quote] Hi Brian...) so there is some headroom in the throttle stick which offsets the lower pack voltage. Regards, Jason.
Posted on: 8/30/2012 6:25 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11212112
RE: Ordered new batteries . . . we'll see . . .
[quote] Jason, Generally speaking the recent,last 7 or 8 years, evolution in F3A models has been to bigger fuz's for drag and knife edge and to smaller wings to increase wing loading. Also E power and IC are flying the same designs,mostly. There must be an optimum wing loading to suit most... have to live with differing opinions on that one...[:D] Cheers, Jason.
Posted on: 8/30/2012 4:50 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11212024
RE: Ordered new batteries . . . we'll see . . .
[quote] Hi Jason, You may not be able to notice the drop off but you can take it that - it does happen. The bigger the pack capacity to begin with the less it drops for any style or T curve etc. Rhino 4900 are 1250g that's a 50g difference. The IC guys have a 500g change during the flight... to their own though. A lighter model will always fly better than a brick. Regards, Jason.
Posted on: 8/30/2012 3:02 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11211923
RE: Ordered new batteries . . . we'll see . . .
[quote]ORIGINAL: Niall [quote]ORIGINAL: Jason Arnold [quote]ORIGINAL: Niall They came as a 10S brick... [/quote] At 1300 grams you're not wrong in saying it's a brick! [&:] Cheers, Jason. [/quote] At 1300 grams for 5800 I'm willing to take the extra weight for the extra capacity... to the smoothness and efficiency of your model. Cheers, Jason.
Posted on: 8/30/2012 4:14 AM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11211303
RE: Ordered new batteries . . . we'll see . . .
[quote]ORIGINAL: Niall They came as a 10S brick... [/quote] At 1300 grams you're not wrong in saying it's a brick! [&:] Cheers, Jason.
Posted on: 8/30/2012 3:34 AM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11211281
RE: BVM Balsa Bandit plans
[quote]ORIGINAL: Harley Condra There are lots of people on this board who do not know about the variations and evolution of the design. [/quote] Harley yes you are right but it seems kirkj is not one of those people as I believe he is 100% correct and not "Wrong...." as you stated. Jason
Posted on: 8/28/2012 12:39 PM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11209291
RE: BVM Balsa Bandit plans
[quote]ORIGINAL: kirkj I believe there was only 1 ''balsa'' bandit. as it was called by BVM [/quote] Agreed, the other was a "Balsa Super Bandit" I don't even think the term "Classic" even arrived until the Super rolled out in 2002. Jason
Posted on: 8/28/2012 10:29 AM by Author "jason"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11209129
RE: New ESC.
Spin 99 or wait for the Mezon as it's lighter. Regards, Jason.
Posted on: 8/27/2012 6:38 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11208384
RE: Futaba 9650 servos for pattern
Looks like the BLS153 is the best for speed, torque & weight... Cheers, Jason.
Posted on: 8/23/2012 9:23 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11204128
RE: Futaba 9650 servos for pattern
[quote]ORIGINAL: PatternFlyer Jason, BLS153 has black nylon gears. How do they hold up? I've had a couple of new out of box S9650 with gear slop. Replaced them under warranty. The other plane got JR DS3421. If not Futaba or JR, Savox has 1250MG. http://www.savoxusa.com/SearchResults.asp?Search.... Regards, Jason.
Posted on: 8/22/2012 9:33 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11202927
RE: Futaba 9650 servos for pattern
[quote]ORIGINAL: nonstoprc Thanks guys for the tip and suggestion. On BLS 153, Tower [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXYAE9]here[/link] lists its replacement gear as nylon (in black). Are these gears durable? [/quote] I'm using them in my Spark without any issues. Regards, Jason.
Posted on: 8/22/2012 9:14 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11202912
RE: Futaba 9650 servos for pattern
but without the mounting tabs on the sides. Cheers, Jason.
Posted on: 8/22/2012 7:52 PM by Author "Jason Arnold"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11202828
| 
