RE: 130x tail
jfast I've had the same problem. I finally pushed tail boom on far enough that it almost touches the back tail shaft. Have not had a problem in the last 10 flights.
Posted on: 9/9/2012 1:44 PM by Author "jcubby" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=11222957

RE: msr frame
Ya you pretty much have to take it all apart. Most everything screws on. The motor may be held in with some sort of silicone. I was at the Gym this past winter and had to change out the frame. I did not glue the motor in. On my sons MSR The motor was not glued in. The Shaft will be the hardest part to get back together. You may want to take pictures for reference of where everything goes. Good Luck Jim
Posted on: 6/23/2011 7:47 PM by Author "jcubby" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=10589397

RE: msr frame
On the MSR you will have to change out the whole frame. Its all plastic. On the ,120 SR and the CX's, the rods are CF and can be changed out without replacing the frame. I had to change out my frame recently. Only took me about 1/2 hour.
Posted on: 6/22/2011 9:30 PM by Author "jcubby" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=10587784

RE: Wild Hare Electrics
I have been to the web site for wild hare. Noticed the sale on the 540 electrics. Read this entire thread and an interested in getting one. I could not find a way to order on the site. How do I order one?
Posted on: 12/26/2010 10:32 PM by Author "jcubby" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10220161

RE: MCX2 Problem
I just had the same thing happen to me the other day. Found out I was bound up with the battery or the canopy because when I moved things around it started working again. Hope that works. Otherwise a new servo, which I would not try to replace, But it can be done . Or a new brick. Hope it does not come to that. Good luck.
Posted on: 12/26/2010 9:33 PM by Author "jcubby" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=10220096

RE: Goldberg Staudacher Manual needed
In the Technical support page at the Carl Goldberg site they have an e-mail address for replacement manuals. Might be worth a try. Site: http://www.carlgoldbergproducts.com/techsupport/index.html Good Luck PS: I have a friend with one of these, and it flies great! He is the 3rd owner of this plane no Manual.
Posted on: 12/13/2010 11:10 AM by Author "jcubby" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10194466

RE: Great Planes Spectra Kit Build Flaps Ailerons???
I may be wrong but I thought that the 6 channel Spektrum AR6100e was/is a short range rx. I would hate to see someone lose such a beautiful glider. I have a Great Planes Spectra kit built glider, that I have been flying for the past 15 years. Rudder and elevator control only. Spoilers would have been nice, but with power go arounds work. About 4 years ago it got upgraded to brushless. Much lighter system, thermals better now, and can get very high. Thinking long range rx is needed. Good luck with your build!!
Posted on: 11/26/2010 1:01 AM by Author "jcubby" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10160199

RE: BL outrunner setup problem
To get the motor to run in the right direction only two wires need to be switched out. But if the motor does not run even backwards then their is some other problem. Had this same thing happen on one of my motors. I called the motor Company about this and they told me that 99% of the time that one of the soldier joints is loose. I re sodiered all the joints and it work again. Good luck Jim
Posted on: 9/12/2010 9:02 PM by Author "jcubby" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9997667

RE: Great Planes Trainer 40 kit instruction/builders booklet
The manuals are at Great Planes in PDF format. First link is to PT 40. Second link is to PT 40 MKII http://manuals.hobbico.com/gpm/pt-40-manual.pdf http://manuals.hobbico.com/gpm/gpma0116-0118-manual-v1_2.pdf
Posted on: 5/31/2010 1:20 PM by Author "jcubby" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9771067

RE: looking for durable 3d plane
EPP foam planes seem more durable. More are coming out all the time. This one seems perfect for motor and speed control that you already have. http://www.graysonhobby.com/catalog/index.php its their sukhoi
Posted on: 10/9/2009 3:33 PM by Author "jcubby" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9159661

RE: Schwans Profile Planes
Try this site http://www.swanyshouse.com/index.aspx
Posted on: 7/1/2009 8:02 PM by Author "jcubby" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8899102

RE: Blade 400 - Tips, tricks, and mods
Was on E Flites Web site http://www.e-fliterc.com/Products/RelatedParts.aspx?ProdID=EFLH1400&Category=Hop-Ups&SubCategory= Check out the upgrades.
Posted on: 7/13/2008 5:53 AM by Author "jcubby" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7724896

RE: Anybody using a 8UAP or 8UAF to run AFPD??
I had the same problem with my radio T8UHP. I even called, send in the cable for replacement. New cord same problem. You will not believe this but I used the adapter cord from my Great Planes Real Flight Deluxe, and it worked!!! So much for selling the Great Planes Sim to help pay for AFPD. You may have troubles getting the adapter piece for the deluxe version though Good Luck
Posted on: 10/6/2006 10:12 PM by Author "jcubby" in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=4837504

RE: Ys F-120 manual required and advice
Dave I PM'd you Thanks, jcubby
Posted on: 3/12/2005 5:00 PM by Author "jcubby" in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=2757585

RE: Ys F-120 manual required and advice
Dave I just recently purchased a YS 120 FZ. The previous owner only ran it once, then sold it to me. It has a manual for an FZ 53, but not the FZ 120. How can it get one? Or is there an internet site that I could down load one from? Thank jcubby.
Posted on: 3/11/2005 9:35 PM by Author "jcubby" in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=2755187