RE: Postal Plane Project
i would be glad to fly it for the state of iowa, this project is awesome if only more were started....[8|]
Posted on: 9/18/2007 9:47 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=6385853

glider plans
i was wondering if any of you knew of some free plans out their for a true glider ( no Motor up front) if you do please post here. 2 meter would be perfect for thermalers but i want all sizes. also if you know of and sloper plans out their i would take those two.
Posted on: 7/20/2007 5:21 PM by Author "jerusha" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=6135975

RE: Sigmfg.com has over 100 (count 'em!) Norvel .061s in stock!
caant you just add a carbureator to a control line engine and turn it into a r/c engine?
Posted on: 7/7/2007 10:58 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=6082906

norvel engine found
i have a question about the norvel company, are they still gone from the face of the earth or are they back and exporting engines. my LHS has a norvel .061 big mig R/C plane in stock that i plan on buying but i havent seen or heard of anything saying sig was importing engines again so did they just stumble upon this engine or are norvels available again.
Posted on: 7/7/2007 2:46 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=6081536

RE: 1/2A trainer anyone?
i was thinking about building an electric version of this plane also and was wondering if a speed 380 motor and a 25 amp speed controler would power it.
Posted on: 4/2/2007 6:25 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5655137

learn 3d
i was wondering what plane you guys would recomend for learning 3d. i would prefer electric but nitro will work. it must not break the bank also .
Posted on: 3/31/2007 10:38 PM by Author "jerusha" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5646564

RE: 1/2A trainer anyone?
it doesnt look very pretty since this is my first build and i cannot cover to save my life[&o]
Posted on: 3/19/2007 8:28 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5586763

RE: 1/2A trainer anyone?
i just need to break in my engine and then bolt it on and i am ready to fly[:D]
Posted on: 3/17/2007 8:56 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5576849

AP Wasp .061 wont start
i have a brand new ap wasp that i bought for my LST trainer. i am using the right prop, the right fuel, the right fuel tank, and a kwik klip glow starter. i have tried about 60 times to start it. it doesnt flood, it doesnt smoke, and it certainly doesnt start. i am at the end of my rope here. i am new to nitro and have almost no idea what i am doing. could someone please help by possibly identifing the problem. i spin it with a starter and nothing happens. i even bought a 1-1/4 spinner so i could use a bigger starter. what is wrong.
Posted on: 3/16/2007 5:36 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5571402

real flight vs. ikarus vs. others
i am looking into bying an rc flight simulator and was wondering which one to buy. i am completely new to sims. i know i will probably get 7 different answers to this question because each person will like or dislike certain things. physics are the most important to me. do the planes perform how they should or is it completely different than flying in real life. also i dont want something that looks completely unrealistic.
Posted on: 2/11/2007 1:14 PM by Author "jerusha" in the forum "RC Flight Simulator Software"
http://www.rcuniverse.com/forum/fb.asp?m=5403014

RE: Postal Plane Project
how is the plane coming dieFluggeister. is it almost done?
Posted on: 1/17/2007 9:03 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5282132

commercial airliner
hi, i am looking for an airliner that wont break my budget. i have looked at a few but they will all cost me over 2000 dollars when all is said and done. i am looking for one that will be under 500 for everything( minus the radio) does anybody no of any websites or planes that fit this description?
Posted on: 1/7/2007 4:03 PM by Author "jerusha" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=5226471

RE: FMS interface
would that cable work for a jr radio. if not do they make those
Posted on: 12/5/2006 8:51 PM by Author "jerusha" in the forum "RC Flight Simulator Software"
http://www.rcuniverse.com/forum/fb.asp?m=5080319

controller question
i downloaded FMS flight simulator off the internet and i was wondering iff you can hook a radio up to this with a cord or if you can just control it with your keyboard? any help would be helpful
Posted on: 12/3/2006 9:14 PM by Author "jerusha" in the forum "RC Flight Simulator Software"
http://www.rcuniverse.com/forum/fb.asp?m=5071868

RE: 1/2A trainer anyone?
no, i still need to finish the landing gear and buy and put the wasp on. does anyone have a picture of the landing gear, that would make it a lot easier.
Posted on: 11/18/2006 6:53 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5012170

RE: Postal Plane Project
i agree with the AP wasp i think it is a good engine. especially after a few flights plus they are available everywhere.
Posted on: 11/17/2006 5:59 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5008611

RE: Postal Plane Project
sounds great but i dont think you should put a cox on the plane. i have only had bad experiences with them. also i think you should add strip ailerons. if the people dont want to use them than thats fine
Posted on: 11/12/2006 7:11 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4987613

RE: Postal Plane Project
thats a great idea. i would definitely fly it for the midwest region. (Iowa) however i think that it would be a good idea to keep the plane easy to fly. a shrike sounds kind of hot. otherwise theirs a good chance this plane wont make it very far.
Posted on: 11/11/2006 1:15 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4982891

AP wasp .061
i am wondering if a 7x4 prop would be suitable for this engine if it wqas being used in a 35 inch wingspan trainer. also does anybody know what fuel to use for this engine. i am new to nitro so any suggestions and help are welcome.[:)]
Posted on: 11/5/2006 5:55 PM by Author "jerusha" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4958693

RE: 1/2A trainer anyone?
now that i think about it i dont want a .09 but will the .061 wasp handle this bird?
Posted on: 10/21/2006 1:01 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4896603

RE: 1/2A trainer anyone?
one question would an AP .09 be able to fly this or would that be to heavy and big
Posted on: 10/20/2006 6:28 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4893804

RE: norvelle engine
will that be enough power though or should i go bigger if im going to use the wasp
Posted on: 10/16/2006 5:02 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4875679

norvelle engine
this might be a really dumb question but norvelles are still made arent they? they arent like Cox engines or anything. i could just go down to my local hobby shop and pick one up right?
Posted on: 10/15/2006 10:03 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4872582

RE: 1/2A trainer anyone?
okay ill see what i can find with both nylon and wood props and try some combinationns. i just got the wing and tail done. all i have left to build is the fuselage. however the landing gear is confusing me could some one post a picture of a closeup of the landing gear area? i cant wait to get this plane flying!
Posted on: 10/9/2006 9:26 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4847859

RE: Great Planes p51 First Time Kit Build Thread
wow!![:-] nice work. that looks great, this kit seems to be what i am looking for but i would like your input, how hard has the build been? and is the kit high quality with most things included?
Posted on: 10/5/2006 9:59 PM by Author "jerusha" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=4833695

RE: 1/2A trainer anyone?
the reason i want wood is because i have heard and seen how nylon propellers bend/wobble at high rpms and wood props dont do that
Posted on: 10/3/2006 9:07 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4824818

free CAD
does any one know a link for a CAD program thats free?
Posted on: 10/2/2006 9:30 PM by Author "jerusha" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=4820524

RE: 1/2A trainer anyone?
okay, i am planning on using the norvelle .069 for and engine. but what prop would be good for it? it has to be wood not nylon!!!
Posted on: 10/2/2006 9:26 PM by Author "jerusha" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=4820498

RE: Great Planes p51 First Time Kit Build Thread
that looks like a good kit. tlee me, is it all that hard to build. also have you heard from anyone what the flight charaacteristics r like
Posted on: 10/2/2006 9:16 PM by Author "jerusha" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=4820439

new plane
ia m looking for a suitable kit for a second plane. i like kits so much better than arfs or rtf so anyhelp would be nice. i dont want it to be any bigger than .60. also, i would like it to be somewhat easy to build, i can build so-so. nothing that requires mor than moderate building skills.
Posted on: 10/2/2006 9:13 PM by Author "jerusha" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=4820423