RE: Houston - Are you there ?
I'm made it without too much damage at the house. A section of my fence was down, but I got that back up yesterday. A few roofing shingles were also blow off and got that repaired. Been without power since 1am the day of Ike and running on a generator. Lucky for me my ski boat holds 30 gallons of gas that I've been tapping into for gas up my generator. I've ran low on beer twice and had to restock. Did a big fish fry on Saturday with my a lot of my neighbors to try and empty out some of the fish in my freezer. Sunday we partied again with Fajitas and yesterday was BBQ chicken and pork chops. With the power out it's almost like camping in your front yard. JR
Posted on: 9/16/2008 9:01 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7959339

RE: Laser Design Services and Troy Built Models
So the lamb makes friends with the lion?
Posted on: 9/8/2008 10:52 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7932590

RE: GREATER SOUTHWEST PICTURES
Chuck and I became local Waco celebrities as we made the front page of the Local & Texas section of the Waco Tribune-Herald for Saturday Sept. 6th 2008 edition. However, you can't always believe what you read as I told the reporter that it was not my plane but from the article you can see it was reported as being mine. It was actually Chuck's new Reaction 54 ARF. There are more pictures of the event to be found at - http://www.wacotrib.com/photos/mediahub/09052008_modeljet/slideshow/index.jsp?tId=118524
Posted on: 9/7/2008 11:20 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7931308

RE: GREATER SOUTHWEST, WACO TX 9/4-9/7
I'd like to send out a big thank you to Larry and the other HOTMAC members for putting on yet another great jet event!!! And I finally achieved a long time personal goal of burning at least 5 gallons of Jet-A during an event. I met my goal late Saturday afternoon and was almost 3 tank fulls into my second 5 gallon jug when I had a brake problem and was not able to get my Discovery jet to rotate. It was already late in the day so I decided to call it a day and enjoy a nice cold beverage. A special thanks goes to Steve Ellzey and Bob Price for helping me to degaus (sp?) my rpm sensor magnet on Friday. It's nice to have friends with skills!!! It was also nice to visit and talk to all my other jet buds that I've had the pleasure of meeting over the years!
Posted on: 9/7/2008 11:13 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7931277

RE: Tail pipe needed for Skymaster F-15
Jeff - PM sent
Posted on: 5/22/2008 11:06 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7527281

Tail pipe needed for Skymaster F-15
I'm in need of a tail pipe for a Skymaster F-15. JR
Posted on: 5/21/2008 11:29 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7525840

Pusle Jet Bike
http://blog.wired.com/cars/2008/05/jet-powered-bic.html?ybf1=1 Check the link out for yourself. An old school bike with a large pulse jet attached. Scroll down for the video on the page above. He's selling them on ebay. JR
Posted on: 5/21/2008 8:47 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7525175

RE: Central Texas Jet Rally
I would like to thank the Austin gang for putting together another great jet rally. Unfortunately I came down with a cold some how riding with Chuck from Houston to Austin. I didn't really feel up to par to fly my Discovery jet so I sat back and enjoyed this year's event as a spectator. And as always enjoyed the many conversation with all the regulars. Also, Thanks Sean for letting us see your workshop and drink a few cold ones. You've got a cool shop for constructing anything jet related. Just surprised you have tried to build a turbine yet with all your CNC stuff. See everyone at the next jet rally! JR
Posted on: 5/19/2008 8:26 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7516430

RE: JetMach Sport 60 flew today
I need a 120 size JetMach Sport so I can put my 24lb T750 in it. When can I place my order? JR
Posted on: 5/14/2008 10:51 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7494797

RE: Central Texas Jet Rally
Chuck and I are coming up Thursday night and will be ready to fly Friday morning. This is one event that I personally look forward to each year. JR
Posted on: 5/14/2008 10:43 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7494776

Houston Hobbies - Site online again!
Ok I've completed the upload of my files to the new web server and everything should be back online with exception to products I previously sold and no longer sell. But all the tips and information on modeling are up for viewing. JR
Posted on: 12/27/2007 2:31 PM by Author "jetflyer" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=6811704

RE: Did Houston Hobbies Go Bye Bye?
Sorry guys. I moved servers and have not had a chance to upload the information to the new site. Give me another day or two and it will be back up. At least I know someone is getting some benefit out of the stuff I did on the site. Oh, I now have an HD camcorder (Canon HV20) and will be putting some more stuff online soon in HD! JR
Posted on: 12/25/2007 5:01 PM by Author "jetflyer" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=6803401

RE: FLy Eagle Jet Models
How much fuel can the F-16 carry? I'm looking for at least 100oz or more. thanks, JR
Posted on: 12/10/2007 2:12 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6738965

RE: RAM Turbine Support
You can also get support from Modellbau USA. Check there website for contact information. I got my Ram 750P upgrade 2 years ago to full autostart. http://www.modellbau-usa.com JR
Posted on: 12/2/2007 9:42 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6706079

RE: My first attempt at Repro Jet 1a Gear
Looks really nice Sean. JR
Posted on: 11/4/2007 8:05 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6581020

RE: Got a 6x12 trailer - now what
Yep Ron has a point and what I had intended to do from the get go. Thanks for the other link, many examples of how to layout a trailer. JR
Posted on: 10/10/2007 1:58 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6473607

Got a 6x12 trailer - now what
I'm looking for interior photos of how some of you have configured your trailer for transporting jets. I just purchased a 6x12 trailer with a side door and fold down ramp rear door. thanks, JR
Posted on: 10/10/2007 10:44 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6473037

RE: DV8R Manual wanted (PDF format)
I got it! Thanks for helping. JR
Posted on: 5/30/2007 7:34 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5920275

DV8R Manual wanted (PDF format)
Since the PCM Models website is no longer, I'd like to find someone who still has a copy of the PDF manual on the DV8R. If you have a copy, please email it to me: jr@houstonscreenprint.com thanks, JR
Posted on: 5/29/2007 9:09 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5918606

RE: I need help on a scratch wing I'm doing
Sean, I would just round the corners and be done with it. As long as you are installing spars they are going to distribute most of the force during a landing. If you're worry about the retract plate being too small, just add a layer of carbon fiber underneathe a bit. But I don't think it will be necessary. What wing is this for? Megabar??? JR
Posted on: 5/24/2007 9:48 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5898266

RE: fuel tank material
I tried the melting foam process; thus, why I now choose to wrap the foam halves in clear tape. Too messy otherwise! JR
Posted on: 5/24/2007 4:02 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5896754

RE: fuel tank material
I've made a few fuel tanks over the past 3 years and I prefer a couple of layers of 6oz fiberglass cloth and West System epoxy. I have a method of securing 6mm Festo fittings to the tank which makes for easy plumbing. Depending on the crash impact I don't think any tank will survive. I've made a tank with Kevlar and I much prefer the the fiberglass cloth. The fastest method of molding your own tank is to carve the size you need from foam and then saw the tank in half. Wrap clear tape around the foam and glue each half to a piece of 1/4" MDF that also have clear tape on the surface. Mix up some epoxy and drape fiberglass cloth over the tank. When cured, pop off the halves, plumb the tank, and glue the two halves together. Can be completed over a weekend. JR
Posted on: 5/24/2007 3:22 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5896614

RE: Latex paint
I've sprayed Latex with an HLVP gun and it worked really well. Here is the write up I did on my website http://www.houstonhobbies.com/tips/painting/spraying-latex-hvlp.htm The link is also mentioned in the write up link above, but here are some pictures incase you miss the link. http://www.houstonhobbies.com/tips/painting/latex-paint-session.htm JR
Posted on: 5/24/2007 3:12 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5896568

RE: Austin - Central Texas Jet Rally 2007 - Pictures
more pictures
Posted on: 5/20/2007 1:20 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5876694

RE: Austin - Central Texas Jet Rally 2007 - Pictures
more pictures
Posted on: 5/20/2007 1:16 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5876687

RE: Austin - Central Texas Jet Rally 2007 - Pictures
more pictures
Posted on: 5/20/2007 1:10 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5876674

RE: Austin - Central Texas Jet Rally 2007 - Pictures
And some more pictures
Posted on: 5/20/2007 1:05 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5876667

Austin - Central Texas Jet Rally 2007 - Pictures
David and I just got back from the 2007 Central Texas Jet Rally held this weekend in Austin. The weather was great and the wind was little to be found and what was blowing seem to be straight down the runway. As usual the Austin gang put on another great jet event. For those of you who did not attend you missed out! Instead of driving to the event, David and I flew a Cessna 172 from Pearland airport to Austin Bergstrom. We managed to get in 3.6 hours of flying time round trip of which 1.6 was logged as night time. Here are some pictures for all who did not attend. JR
Posted on: 5/20/2007 1:00 AM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5876655

RE: Discovery Jet Pictures
Barry, Had fun and need to fly out there more. Sean, A little clenching for the first few flights as I was learning this new jet. Totally different situation then the Super Reaper. The Discovery is really a great all around jet. Chuck, And who commented they were still shaky? Gary, What can I say...you missed a out again on a great day of flying. I actually few around with a few prop guys too. Scobee is really a good field for jet flying in Houston. All, How about another round of fun on March 15th? JR
Posted on: 4/4/2007 11:37 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5667352

Discovery Jet Pictures
My buddy Chuck was nice enough to snap a few shots from last Sunday's jet flying at Scobee field. JR
Posted on: 4/3/2007 4:02 PM by Author "jetflyer" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5659791