RE: SQUIDHEAD RACING (whiplash)
Yhanks every one for helping me out
Posted on: 4/27/2009 2:47 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8718387

SQUIDHEAD RACING (whiplash)
Hi mate I was wondering if you biuld whiplash gas boat for people as you do with the riggers???? Do you know what to biuld is like from ozrcboatsupplies.com.au ???? Looking at doing one but don't wont to start if i can not finish it ???? Any help??
Posted on: 4/26/2009 11:39 PM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8718010

Wood whiplash or Zippkits hydro
Hi all i am trying to make my mind up about what boat i should build Whiplash from blazer marine or the zippkits hydro????? What are the speed difference??? Will be running all the top stuff full mod motor?? What gose betta out of them both??? I will be racing Any help would be grate full thanks james
Posted on: 3/23/2009 6:24 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8606475

Radios
I have been looking arounf for a radio been to hobby shops and got some inmormation Do not run 2.4 radios Do not run Spectum All they say is run AM or FM Any help
Posted on: 3/22/2009 12:06 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8602393

RE: Blazer Marine sports gas hydro (whiplash)
hi all dose any one have pic of biulding the hull????? And dose and one know who makes some nice fast good zenoah in australia
Posted on: 3/18/2009 7:07 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8590004

Blazer Marine sports gas hydro (whiplash)
Hi every one i am thinking of biulding BLAZER MARINE SPORTS GAS HYDRO WHIPLASH BOAT I was wondering if any one out there who has one or is biulding got any information about them???? The motor i am thinking of running in it is a sikk (27cc) OR some thing better if you tell me and the qwick draw pipe??? The boat motor and pipe will be coming from oz rc boat supplies Thanks james
Posted on: 3/17/2009 6:21 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8586577

RE: -New Product- Illusion Gas Tunnel Hull
Got any other pic of this boat
Posted on: 3/17/2009 2:25 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8586413

raptor autorotation
ok i have been practising autuorotations with the raptor. I have started at 50% throttle and slowly moved down to 25% throttle, my idea is to keep doing this and slowly get lower and lower. Any tips and tricks i shoud know? i have a vid of my progress to get some feedback. http://www.youtube.com./watch?v=zjnbc55Weg8
Posted on: 3/16/2009 1:47 AM by Author "jimmy 1987" in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=8582502

Gas outborads
Any information about gas outborads would be good great
Posted on: 3/15/2009 7:04 PM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8581291

RE: Zippkits tunnel
Joe Do you have videos of the boat running what are they like any good what speeds are they getting??????
Posted on: 3/15/2009 6:52 PM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8581265

RE: Zippkits tunnel
Hi yer i have read up about them i love the look of them really nice. I like outborads more but. And like making the kits aswell
Posted on: 3/15/2009 6:49 PM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8581260

Zippkits tunnel
OK hi every one i was wondering if the zippkits tunnel is any good and who will be selling them, And when will they be ready to come out???? and is there much information about the outborads motors and legs hope yous can help me thanks james
Posted on: 3/15/2009 7:14 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=8579570

RE: battery- bubbled
ok then, thanks for all the replies. I will use it seeing it is charged then dispose of it properly. Looks like its time to stock up on some more haha
Posted on: 10/8/2008 12:36 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8029058

battery- bubbled
i was charging up my lipo batteries for my belt cp..........i accidently left the charge rate on 2.2 amps after charging a 2200mah battery. I nearly finished charging a 1800mah on 2.2 by accident and looks as if the silver outside underneath the green covering on the esky battery has bubbled. is this still safe to use?
Posted on: 10/7/2008 6:42 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8026047

RE: ........."BELT-CP THREAD"........
creteus usually i only fly in hh mode. But in rate mode it holds and it also does in hh mode although sometimes it spinds ever so slow to the right and sometimes to the left also. I am trying to install a jr digital servo- DS 381, Is there any different way to install a digital servo?
Posted on: 10/7/2008 6:40 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8025983

RE: ........."BELT-CP THREAD"........
hmmmm...... ok that does make sense. I am only using the stock esky servo for the tail but i have a digital servo lying around here somewhere, might put that on and set it up again.
Posted on: 10/7/2008 4:54 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8025945

RE: ........."BELT-CP THREAD"........
i have recently got a dx6i for the belt cp. Now my heli works awesome although i have one quik question. I have the teleebe hh gyro set up properly but it creeps a lil bit in hh. Now to fix this i need to change the sub trim a lil. Do i change the sub trim on the rudder or the gyro when in the sub trim menu of the dx6i?
Posted on: 10/7/2008 1:40 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8025748

RE: Belt-CP a toy?
i have only flowen a 4 ch fp heli to learn to hover then i went ahead and bought a belt cp. over time i have slowly upgraded it. The best thing to do is get a dx6i of dx7 if u can and then u have a good heli i think. At a local heli club i went to a 't rex guy' had a go at a belt cp and thought that it could even be more stable in a hover, u just cant throw it around as much. The way i look at it, get a heli that suites u. The belt cp suited me fine as i learnt forward flight and even backflips, now i can put the money i saved on buying the belt cp towards a nitro heli!!!!!!!!
Posted on: 10/5/2008 1:24 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8019703

RE: belt cp motor mount
ummm i think it has developed over time. yes when tightening the 4 screws that go in each sides of the motor mount tray which holds the motor..........
Posted on: 10/2/2008 7:15 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8011444

RE: ........."BELT-CP THREAD"........
the dx6i.......... i agre. Got mine yesterday set it up and flew it today. Amazing how much better the heli flies, so much more stable and u can throw it around so much more! fixed all my gyro problems.... binding.... and tracking issues.
Posted on: 10/1/2008 9:19 PM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8010357

RE: belt cp motor mount
yes the frame is hitting the outer run of the motor unless i undo the screws a fair bit. I spose it is alright undoing the screws but not sure if this is safe? Does any1 elses frame come close or can everyone do the screws right up as tight as they go?
Posted on: 10/1/2008 9:11 PM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8010326

RE: Help dx6i
ITS ALL GOOD NOW. FIGURED IT OUT!
Posted on: 10/1/2008 3:07 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8007880

Help dx6i
ok my dx6i arrived today for my belt cp. Been setting it up but cannot go any further. I asked fro a mode 1 (throttle right) which is what i got sent. After setting everything up, the tx thinks the trottle is on the left rather than the right, and the forward movement is on the right rather than the left. How do i change this, swap it around?
Posted on: 10/1/2008 2:13 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8007824

RE: belt cp motor mount
the plastic from the frame....
Posted on: 10/1/2008 2:08 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8007818

belt cp motor mount
on my belt cp when the motor mount screws are done up as tight as they go the plastic hits the motor. they need to be very loose so the motor spin freely without the plastic hitting it. One of the screws are stripped down so i was going to buy new screws then came across a metal motor mount upgrade. will these help the problem of the plastic hitting the motor? is it worth it or should i just buy a new plastic one?
Posted on: 9/30/2008 6:16 AM by Author "jimmy 1987" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8004572

huey body on my belt cp
as the titel says...... here are a couple of pics of the huey on my belt cp for any1 who is thinking of doin the project. it is one of darths by the way.
Posted on: 9/16/2008 5:34 AM by Author "jimmy 1987" in the forum "Scale RC Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7959077

RE: Rudder not turning left
ok will post some pic up tomorrow after work Thanks james
Posted on: 9/14/2008 6:23 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=7952367

RE: Rudder not turning left
Got the prop from Ozspec hobbies full race prop. and the push rod is straight know bends battiey pack is 1100 mah pack hump from the hobby shop
Posted on: 9/14/2008 5:12 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=7952315

RE: Rudder not turning left
OK hear what it is doing i am going full around the pond and then try to make a small turn to the left and boat will not turn at all?? even the control is on full turn??? only dose it when i am going full half it wll turn left???
Posted on: 9/14/2008 5:05 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=7952306

Rudder not turning left
hi all Used my boat to do and was wondering why the rudder dose not turn left when i am flat out??? then i would go slower and then it will turn left????? running a 1/4 servo hs-755 hitec with 6v battiey any help
Posted on: 9/14/2008 4:10 AM by Author "jimmy 1987" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=7952274