|
RE: trx 3.3 strange compresion symptoms
nope definatley no airleek low speed shuts off after about 3 seconds im gona try new fuel line
Posted on: 8/28/2008 2:38 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7895717
RE: trx 3.3 strange compresion symptoms
ok i did the swuirt test nothing just has a solid idle then i checked my fuel line and i have found that my fuel line is quiet tight so smaller diamiter i gona put some new longer fuel line on lol should have checked that first
Posted on: 8/28/2008 6:43 AM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7894539
RE: trx 3.3 strange compresion symptoms
ok i did the swuirt test nothing just has a solid idle then i checked my fuel line and i have found that my fuel line is quiet tight so smaller diamiter i gona put some new longer fuel line on lol should have checked that first
Posted on: 8/28/2008 6:40 AM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7894533
RE: trx 3.3 strange compresion symptoms
lool no water got in lol fingers were protecting bt i but some aro in for good mesure
Posted on: 8/27/2008 8:07 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7893012
RE: trx 3.3 strange compresion symptoms
ok i have done a througher check of my whole engine and setup no leeks i even put the whole engine under watter and using a lng peice of fuel tube blew in the the the fuel nipple with my fingers over exhayst and carb hole not one bubble this is realy frustraiting now im scared to run my engine because if it blows up i cant buy another one what else could be wrong
Posted on: 8/27/2008 7:52 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7892960
RE: tunning rrrrrrrrr!!!!!!!!!!!!!!!11
are you talking about the 2 little silver screws if you are you need to get them replaced because they are for seaing the card they stop the engine geting too much air
Posted on: 8/27/2008 7:43 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7892911
RE: trx 3.3 strange compresion symptoms
ive had a quick check for air leeks and there are no obious ones i am going to change my spur gear to a 54 tooth one will that hellp at all
Posted on: 8/25/2008 4:48 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7884669
RE: T-maxx super charger (IS IT WORTH IT)
nope they are total rubbish a good tune will do you much better speeed and they kill your engine real quick
Posted on: 8/25/2008 4:46 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7884666
trx 3.3 strange compresion symptoms
ok heres the deal i bought a new style t-maxx 3.3 and made it a full ally basher (check my other post) i have had problems with overheating i belived it to be because of a real tight pinch but now ive noticed that when the engine is hot -warm it has verry little pinch /compression im worried now because it runs at 250f at 5 turns out what could be the problem theres no air leeks
Posted on: 8/25/2008 3:42 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7884412
RE: Integy steel driveshafrs
i dont see the problem with integgy if its soft then bend it back to shape lool i do know that mip make good cvds
Posted on: 8/24/2008 7:54 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7881348
RE: Are these any good???????
best thing to do is get the integy 3 peice kit and 2 sets of traxxas 3.3 shoes then cut the traxxas shoes to the same size as the integgy ones and you get the best of both worlds
Posted on: 8/24/2008 7:51 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7881334
RE: full ally 2008 t-maxx basher loads of pics
yep i have a 54 tooth spur gear in my spares box maby that would hellp but i havent got past 1/2 throttle so i dont realy thing gear ratio is an isue i have dug up a old 3.3 head from my spares box lol im de-annodisign it now so it matches the ally parts lol i might put aro in the fuel its a lil trick we use at work for engines with loads of pinch other than that ive run out of ideas i think i need to contact traxxas we belive we have had a bad batch of t-maxx one had a oval piston lol you can imagine our faces when we took off the engine head UPDATE just put on the new engine head and will try to carry on running in tommoro
Posted on: 8/24/2008 7:19 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7881069
RE: Air FIlter Help
for air filter oil theres no real replacement than the real stuff to clean you can use fuel or dish soap lol nice choice of truck
Posted on: 8/24/2008 7:17 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7881211
RE: full ally 2008 t-maxx basher loads of pics
yep no apparent air leeks front bearing leeks small amounts of oil but thats normal on breakin because of richness is there a new engine head out because mine is difrent than my old t-maxx
Posted on: 8/24/2008 5:37 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7880881
RE: full ally 2008 t-maxx basher loads of pics
yep lol its at about 5 turns out lool dont forget i work at a decent hobby shop specilising traxxas lol
Posted on: 8/24/2008 5:06 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7880781
RE: full ally 2008 t-maxx basher loads of pics
tHAT was with the stock t-maxx body with the body off its at 270f but its pretty cold here im woried about the engine head being diffrent from the stock 3.3
Posted on: 8/24/2008 5:05 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7880766
RE: full ally 2008 t-maxx basher loads of pics
thanks for the posotive comments its all integy lool i am on the 3rd tank of break in and having issues with over heating after 5 mins on the second tank engine clocked in at 325f witch made me notice the fact theres no holes on the cooling head i have emailed traxxas no reply yet
Posted on: 8/24/2008 4:53 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7880727
RE: full ally 2008 t-maxx basher loads of pics
dont know if its nrmal but can you see in the pics that my engine head has no coling holes
Posted on: 8/24/2008 8:08 AM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7879380
RE: full ally 2008 t-maxx basher loads of pics
i took it to work (lhs) today and they have now got pics all over the walls of it lool shame i will destroy it at the bmx traack tommoro lol yep its all integy ally stuff so soft ally
Posted on: 8/23/2008 7:10 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7877920
RE: full ally 2008 t-maxx basher loads of pics
even more pics
Posted on: 8/23/2008 7:01 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7877896
RE: full ally 2008 t-maxx basher loads of pics
more pics
Posted on: 8/23/2008 6:59 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7877891
full ally 2008 t-maxx basher loads of pics
ok here is my lastest project i recentley sold my t-maxx truggy it was a home made monster with a picco .28 i missed it soo much i bought an integgy evo 4 kit for 100 pounds less than half price then went to work (lhs) and bought the new t-maxx i have had this truck for 1 day looooool
Posted on: 8/23/2008 6:57 PM by Author "joelgould111"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7877881
RE: best setup on e savage
mmmmm..... im getting the truck on friday and will clean it up and give it a quick referb all it needs is a new shock cap and springs i have paid the money in to my account for the electrics i will ask my boss to order the parts but i garentee he will say no so its up to tower from then on lol also would a big novak motor work with the mamba max esc
Posted on: 8/6/2008 6:00 PM by Author "joelgould111"
in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7816730
RE: best setup on e savage
lool i kinda blew a lipo up it was a 3s i was cuting out a switch and just scrached the surface of the lipo no more than the deph of a hair and it started hissing so i threw it out the door and boom allll gone lol
Posted on: 8/5/2008 6:34 PM by Author "joelgould111"
in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7812728
RE: best setup on e savage
lool i have a lot of experiance lol i work in a hobby shop lol but we specilise in nitro and the point of running 4 bats is to make it like a monster project i probably dont have the money to do the 4 bats project after seing a lipo go up 2 foot infront of me i dont think i will go with lipo power because this truck is going to be for extreem bashin i got 12ft air with my t maxx it hit the floor so hard it stalled
Posted on: 8/5/2008 5:23 PM by Author "joelgould111"
in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7812466
RE: best setup on e savage
ahh ok cool i might do somethig stupid like run 4 bats lol i might try and get the boss to throw in the motor is nosram i thing i might be wrong
Posted on: 8/5/2008 4:13 PM by Author "joelgould111"
in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7812212
RE: best setup on e savage
im thinking being as im new to this electric i should go with 2x 7.2 is paralel
Posted on: 8/5/2008 4:04 PM by Author "joelgould111"
in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7812180
best setup on e savage
ok so i spoke to my boss today and he says he will give me the savage for £80 as a roling chassis with servos and reciver so i am relay realy new to electric and need you to hellp me find a good setup i want brushless lipo insane speeds as cheap as posable i want it to be a good reliable setup can you chose something for me
Posted on: 8/4/2008 5:14 PM by Author "joelgould111"
in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7808096
RE: e savage with biggg assss motor
i know i realy should have taken pics i start work again on tuesday and will pick his brain about what esc he had because apparentley this thing was insane any more that 1/4 throttle would flip the truck hopefully he will be able to do me a good deal on some parts like esc batts charger as this will be my first electric i know its nealy all purple ally just a few lil bits need doing
Posted on: 8/3/2008 6:02 PM by Author "joelgould111"
in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7804214
e savage with biggg assss motor
ok well i work at my local lhs an im the nitro repair and sales technition lol but i havent got the faintest idea about electric my boss being the nice guy that he is has offered me his e savage for 90 pounds it has a biggg asss brushless motor not sure what one and thats it the car comes fully working it dosent have an esc or batterys he apparentley droped a 4s lippo and well u know the rest what is a decent esc for cheep and will it work lol thanks joel i will try to find out more info soon
Posted on: 8/3/2008 5:09 PM by Author "joelgould111"
in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7804074
| 
