RE: Contra Rotating Propeller Drive for f3a 2m Pattern Planes
Brenner - U got mail :)
Posted on: 9/14/2011 12:36 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10716550

RE: No more flying Figure M .......
No snap in the ½square loop a zero, and he were finished way to soon with the half roll in the ½ loop in figure M - max score should have been 5-6
Posted on: 9/7/2011 10:48 AM by Author "joenella" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10705810

RE: Motor options!
Hi Rune I think I know your SPARK it is a Yellow one from Denmark. It is a SPARK DYNAMIC - before seller became very ill he used an MEGA 5330/11 outrunner, I do not know if it where the one You got. Otherwise I would recommend the NEU F3A, the new version with Ø8 shaft is stronger more powerfull and very reliable.
Posted on: 9/7/2011 10:23 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10705779

RE: 18x18 - 20x20 prop 10,000 rpm
[quote]ORIGINAL: airraptor Youre right 5k will not get me there i need 6.5-7K in power to get there. I have looked around and no one sells a speed controller over 12S. I could get to this rpm if i had a controller that would allow me to run a 15-18S pack. [/quote] Hi YGE 160HV can be ordred ti handle 15S or ask for the YGE 200HV whish is not on thier official site :)
Posted on: 6/17/2011 10:12 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10579818

RE: Should weight and 2Meter rule be modified in F3A?
Just keep the rules as today, but the weigth limit of 5 kg should be ready to fly for both glow anf electric and not as today, where the rule is only for electric. No voltage limit or at least allow 12S, as the Amp usage will drop and make things easier and cheaper.
Posted on: 5/6/2011 11:40 AM by Author "joenella" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10505113

RE: New Krill Spark Evo I- Build Thread.....
Yeeesss !! Maiden my EVO yesterday. As reported earlier it is very sensitiv on the rudder especially around center point.
Posted on: 4/10/2011 9:13 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10455417

RE: Help with Neu F3A motor, CC HV80 in a Passport
Go down to 20.5x14 and voila :)
Posted on: 4/3/2011 10:29 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10440127

RE: Help with Neu F3A motor, CC HV80 in a Passport
Over propped motor!
Posted on: 4/3/2011 6:13 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10439733

RE: New Krill Spark Evo I- Build Thread.....
No right hand thrust build in?
Posted on: 3/27/2011 9:00 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10427203

RE: The 800-pound gorilla sitting in the corner
Go out fly, practice a lot to the upcoming WC, leave the guy in peace and wish him well, everybody have some funny ideas once and a while :)
Posted on: 3/18/2011 11:03 PM by Author "joenella" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10409172

RE: New Krill Spark Evo I- Build Thread.....
Look here :) No wonder why it has been difficult :)
Posted on: 3/15/2011 12:53 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10400796

RE: New Krill Spark Evo I- Build Thread.....
Distance from bottom rudder to rudder horn? Like the dynamic 150 mm up?
Posted on: 3/14/2011 12:46 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10399403

RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: kochj Thankyou.... It appears that Chief aircraft has the glow version instock?? [/quote] I do not think anybody have the EVO for glow instock ;) As Ivo told me yesterday, he will soon be ready with this version.
Posted on: 2/26/2011 12:52 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10365481

RE: New Krill Spark Evo I- Build Thread.....
Great! I will pick up my EVO next Friday after a long wait - I put it in order Oct 2009 :) It will be equipped with NEU F3A - YGE 90HV - Savöx servoes/1257 rudder/1251 Aileron/1350 elevator - Chargery 4450 C35 lipo and Spektrum receiver all eqipment powered by 2S A123 1100mAh
Posted on: 2/18/2011 9:24 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10347131

RE: New Krill Spark Evo I- Build Thread.....
Any more vid's?
Posted on: 2/18/2011 12:40 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10345917

RE: New Krill Spark Evo I- Build Thread.....
Hi Andres Any pictures of the aileron servo installation?
Posted on: 2/8/2011 12:11 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10321275

RE: Contra Rotating Propeller Drive for f3a 2m Pattern Planes
It looks great, now we just need to shorten the length down with 35 mm :)
Posted on: 1/21/2011 11:46 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10278496

RE: Proline Fantasista
[quote]ORIGINAL: wagen017 would that be 78.000 YEN? Expensive... I like the belt drive though, so much more sophisticated then gears... Volkert [/quote] App 1000 U$
Posted on: 1/16/2011 6:39 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10267101

RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: Spark09  Here are the parts I intend to use: Plettenberg Advance 565 grams Schulze Future M 32.80+ 70 grams 2x JR DS3328 for elevator 2x 27 grams 2x JR DS8231 for ailerons 2x 49 grams 1x JR DS 8810 for rudder 65 grams Power box digi switch 16 grams Weatronic Smart 8 reciever 15 grams Hyperion CX 4000 mAh 10s lipo 1015 grams Hyperion 850 mAh 2s rx battery 49 grams Aileron servo extension leads 8 grams Self made rudder servo tray 3 grams PT carbon prop 21x12WE 79 grams Phillipe Marquette spinner carbon 29 grams [/quote] Total together with the kit 4250 gr :)
Posted on: 1/6/2011 9:28 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10243609

RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: Spark09  Here are the weights of my Evo: Fuselage: 776 grams Canopy: 171 grams Bellypan: 67 grams Right wing: 378 grans Left wing: 377 grams Right stabilizer: 126 grams Left stabilizer: 124 grams Landing gear: 122 grams Wheelpants: 43 grams Not very light, but ok. Should be no problem to get it within the 5050 grams limit. [/quote] I think that is very light - lets do some math: Motor (Q80) = 630 gr ESC = 70 gr Prop = 70 gr Wheels = 15 gr Servoes = 210 gr Ext cables. = 70 gr Pull - Pull = 10 gr Links inc rods = 30 gr Battery tray = 20 gr Glue = 30 gr Batteri = 1150 gr Receiver = 25 gr Receiver battery = 70 gr Total flying weight = 4584 gr. I think that is a very very low weight, not easy to get lower.
Posted on: 12/30/2010 10:07 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10229010

RE: BuddEngineering
Jerry have answered on my prayers :) THX everybody
Posted on: 12/25/2010 12:02 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10217630

RE: BuddEngineering
[quote]ORIGINAL: Derek.Koopowitz [quote]ORIGINAL: joenella Not to much from BuddEngineering, I think he is out of business [/quote] He is not out of business - he has a new ad coming in the next K-Factor which is for his Neu motor mount. I suspect that Jerry is probably out of town or very busy... or shut down for the holidays. [/quote] Out for holidays - hmmm for more than 1 month - i don't
Posted on: 12/23/2010 10:19 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10215157

RE: Contra Rotating Propeller Drive for f3a 2m Pattern Planes
Looking forward to test this system
Posted on: 12/23/2010 10:07 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10214025

RE: BuddEngineering
Not to much from BuddEngineering, I think he is out of business
Posted on: 12/22/2010 7:45 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10211532

RE: New Krill Spark Evo I- Build Thread.....
How abouth the fuselage length WITHOUT spinner ?
Posted on: 12/21/2010 11:00 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10211120

RE: BuddEngineering
I know, but no reaction on the mails I have written.
Posted on: 12/17/2010 9:24 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10202636

BuddEngineering
Anybody knows if BuddEngineering still are in business?
Posted on: 12/17/2010 8:45 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10202572

RE: Which motor: Neu F3A-1 or Hacker c50 14xl?
The Neu will pull the same prop as Hacker C50 14xl but with the same rpm as Hacker C50 13xl, go for the Neu
Posted on: 12/13/2010 9:18 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10195710

RE: Contra Rotating Propeller Drive for f3a 2m Pattern Planes
From Mr Krill himself. The EVO I. have diam spinner 80 mm, I am trying to get the maximum length, rest will be very difficult in this moment, I will pick my 3 pcs EVO on Nov 1st :)
Posted on: 9/24/2010 12:23 PM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10024332

RE: Contra Rotating Propeller Drive for f3a 2m Pattern Planes
Have You been testing the new EVO Andrew? I will ask Ivo for the spinner size , I intend to use this on the new EVO
Posted on: 9/24/2010 11:57 AM by Author "joenella" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10024265