|
RE: EME60
i dont know what dle 55 swing a 24at. i use 23a on 55.i had gw edge an move to 89 slick.it has more power then dle 55
Posted on: 8/21/2012 7:52 AM by Author "john911"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11200826
RE: EME60
ya i got one so far it been good about 2gals.im using vess 24a 6600rpm .i hope it holds up.
Posted on: 8/20/2012 3:22 PM by Author "john911"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11200053
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
i think we got are answer, ignore it hope it goes away.
Posted on: 2/2/2012 6:48 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10940006
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
i would like to know to.its just not 2servo per aileron thing the c-mix dont work right an would like my fix.
Posted on: 1/29/2012 5:54 PM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10934244
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
our just wait on a fix.
Posted on: 1/20/2012 12:31 PM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10918877
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
i hope they fix the c-mix.
Posted on: 1/20/2012 12:02 PM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10918849
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
with out the +expo or d\r wont work on the slaved ch.you can get d\r buy using flight modes but you cant get expo.i need expo so this wont work for me.
Posted on: 1/20/2012 11:15 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10918772
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
after i do all that d\r an expo only work on al is that why you say d\r need to be the same as the endpoints?then you need to set up a flight mode for each rate an expo you want right?
Posted on: 1/20/2012 10:36 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10918694
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
i used 1 fl mixed al to aux1 check to see worked it did i dint do anything else.
Posted on: 1/20/2012 8:35 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10918513
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
if you use al both right an left are going to be on one chan. then you have to do all your d\r an expo in a flight mode.it works but i would rather have fix for la+ lfl an ra+ rfl c-mix.
Posted on: 1/20/2012 7:21 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10918424
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
its just not working on mine.no matter what i try the al is 1\3 slower then aux.
Posted on: 1/20/2012 6:13 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10918324
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
i just tried on mine it don't work.
Posted on: 1/20/2012 5:40 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10918277
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
i would to.even if take some time to get it i would like to see a fix.
Posted on: 1/17/2012 7:55 PM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10914379
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
i just looked at it . why dont they just fix it?that ? was for you mike.
Posted on: 1/17/2012 6:17 PM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10914361
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
i have a manual that walks you different setups send me pm with email and ill send it to you.
Posted on: 12/28/2011 7:59 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10879509
RE: sd-10g 2 servos per aileron surface c-mix does not work right past 100% throw
you mite have go to vr assign turn off the flaps.
Posted on: 12/27/2011 6:09 PM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10878786
RE: SD-10G firmware update request
i would like to see 4aileron servos added to the aero flight mode.
Posted on: 10/28/2011 7:07 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10786377
RE: RCEXL Opto Kill and Airtronics 92824 receiver issue
i use wike rc kill switches with that rx with sd-10 without problem.
Posted on: 9/6/2011 4:42 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10703712
RE: dual aileron servos on sd-10
I FOUND IT AUX CHAN WARE ASSIGNED VRS 5&6.
Posted on: 9/5/2011 8:41 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10702412
RE: dual aileron servos on sd-10
THEY DONT CHANGE BY MOVING THE STICK. I SLAVED AUX TO RA+ WHEN AUX HAS A L YOU WATCH ON THE STICK MONITOR RA+ MOVES HALF THE SPEED THAT AUX DOES.WHEN THERE H THEY MOVE THE SAME.IV BEEN MESS WITH ON A NOTHER MODEL I CANT GET THE L TO CHANGE TO A H.
Posted on: 9/5/2011 8:30 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10702394
RE: dual aileron servos on sd-10
yes 2 servos on 1 wing.i figured it out but i dont know how i did it.on surface menu on aux chan had a L ware the endpoints are nothing would match.changed L to h now everything matches.i dont know how i changed L to H.does anyone know to change the L to a H?
Posted on: 9/5/2011 7:17 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10702295
dual aileron servos on sd-10
has anyone tried to do dual aileron servos?i tried i can get the endpoints an centers but binding on everything between the centers an endpoints.
Posted on: 9/4/2011 7:05 PM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10701717
RE: SD-10G Antenna
they just replaced my radio for me this would been good to know.im getting sick of have to look for changes an updates on the web.
Posted on: 3/5/2011 9:36 AM by Author "john911"
in the forum "Airtronics Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10380415
RE: Getting Started in Gas
dont waste your time on the 70" planes.i went that way now they just set there collect dust.
Posted on: 7/22/2010 9:36 AM by Author "john911"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9880713
RE: 100cc an 50cc yaks cg
come on yes no looking in to it?something
Posted on: 7/21/2010 2:45 PM by Author "john911"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9879177
100cc an 50cc yaks cg
i was ready apost about 50cc yak that was tail heavy at 4.25.heres my ? how can cg on 50 be at 4.25 an the 100cc be only at 3.5?i have both on 100 ihave moved the cg back 1\2" it still nose heavy.is there a misprint in the 100cc manual?
Posted on: 7/21/2010 1:01 AM by Author "john911"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9878201
35%yak cg
does anyone know what the cg would be at root end?i dont have anuff room to get it myself.
Posted on: 3/13/2010 2:46 PM by Author "john911"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9578845
RE: FAT YAK
i got utube link http://www.youtube.com/watch?v=Cnvb9LWwMas they wont put the one from fg
Posted on: 2/23/2010 1:48 PM by Author "john911"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9529120
RE: FAT YAK
it' on fg
Posted on: 2/23/2010 1:00 PM by Author "john911"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9528986
RE: FAT YAK
watch this it take our mind off the weight http://www.flyinggiants.com/forums/showthread.php?p=1060383#post1060383
Posted on: 2/23/2010 12:58 PM by Author "john911"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9528976
| 
