|
RE: JET LEGEND VIPER BUILD THREAD
Hi, I also had the maidnflight of my "vodafone" viper on wednesday. Everything went perfect. Mine didnt roll to the left with take off flap setting. Flies great!!. My cg is 30mm behind the factory setting, but i will install a smoke next to the turbine, so i will get the 35mm. A very nice jet for a good price!! i have a 9kg turbine in mine (1000g) and the weight is 10kg empty[:D]. So for takeoff around 12kg Andy
Posted on: 9/1/2012 3:44 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11213342
RE: Good sport jet for a fair price ?
Hi all, Had the maidnflight of my JL Viper on wednesday, it fleis perfect. I think for the price it is the best now available sportjet. [:D]. Ideal for beginners and for advanced sport jeters[:D]. Ideal with a turbine with a thrust around 9kg. Andy
Posted on: 9/1/2012 3:35 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11213340
RE: JET LEGEND VIPER BUILD THREAD
Hi guys, Thanks for your help, will try that :-) Andi
Posted on: 8/13/2012 10:28 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11191701
RE: JET LEGEND VIPER BUILD THREAD
Hi, Sorry Gary for calling you the wrong one :-) Do you have a photo from your strut?. there is a little hole (with a srew thread in int)in the front strut above the two allen key blindscrews who hold the strut. i read that someone put oil in the strut. Did you use the same hole, Do you have to pump up the strut every flight? bestr regards Andi
Posted on: 8/13/2012 10:11 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11191678
RE: JET LEGEND VIPER BUILD THREAD
Hi ian, Did you have the same problem with the front strut, that the spring Is too weak. We are building 4 Vipers, and every front gear goes down to the end way, when the tanks are full!. How Did you Solve that Problem ? Best regards Andi
Posted on: 8/13/2012 9:46 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11191650
RE: C&C Model M346 build and painting thread
Hi Fritz, Nice Plane and perfekt building. Looking foreward to your maidnflight, maybe in Alkoven? ;-) Cu Best regards Andi
Posted on: 8/1/2012 1:59 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11176890
RE: JET LEGEND VIPER BUILD THREAD
Hi, read the post 21# and tried it, but i would brake the fuselage, if i did it that way, it Is crackeling Everywhere. I Cant put One of the Tanks very far to the rear, because of the duct.? Tried it for more Than an hour, :-(
Posted on: 7/18/2012 4:07 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11159628
RE: JET LEGEND VIPER BUILD THREAD
Hi , i tried to get out the tanks of the fuselage, but i was Not able to. Is there a clue or does anyone have the same problem ? Andi
Posted on: 7/18/2012 1:30 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11159566
RE: JET LEGEND VIPER BUILD THREAD
Hi Ian, Did you fix the tanks a second time or do you think it is good as they are?!
Posted on: 7/11/2012 8:00 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11151288
RE: JET LEGEND VIPER BUILD THREAD
Hi William. Got my viper this week, awesome kit!!. Did you mix Down-Elevator to your flaps? Did you need lead in the nose. I tried do get out the tanks of the fuselage, but i think that wont be easy? regards Andreas
Posted on: 7/9/2012 11:04 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11148868
RE: The New F86D Dog Sabre
Ah ok, i understand, i have the same problem on my f16, when it Is windy. Thx a lot :-)
Posted on: 7/1/2012 12:41 PM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11138768
RE: The New F86D Dog Sabre
Hi I have a little question: i Tried to find a translation for the effect "dutch roll" from englisch to german, but i couldnt find any. Could someone please be so kind to explain me in easy words (that an austrian guy [:D] can understand) what the effect causes to the plane and why i need a gyro?! kind regards Andi
Posted on: 7/1/2012 10:18 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11138651
RE: Jetlegend 1/6 Scale F16
Hi michael, Thx i will try and tell [:D] Andi
Posted on: 5/22/2012 10:49 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11090543
RE: Jetlegend 1/6 Scale F16
Hi, I have a little Problem with my maingear. A week ago i had a little hard landing [&o], and one of the bolts who hold the gair was broken. so far so good no problem only had to change. But now it seems, that the main gear has too much toe in and i am afraid the plane will start to break out at the start.You can see the bigger toe in best on the photo 3 from above. Could you take a look at the photos and tell me, if it is still ok as it is. i Think now the gears have a little more clearance than before. The are 2 washers (plastic) at the mechanic, where the system rotates and there is now a gap (you can see it on the photo 2). Could someone please tell me, if this is a problem for the start or is it o.K ? @ steve: i set the cg to 225mm and so the plane rotates better on start. Takes 80m hard field and the planes flies very well with that cg thx Andi [url=http://www.enthuzeus.com/event/gallery/NwVTj][img]http://www.enthuzeus.com/event/gallery/NwVTj.png[/img][/url]
Posted on: 5/22/2012 10:45 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11090534
RE: The New F86D Dog Sabre
Hi Mike, As i told a few post before, in my opinion the pipe is too short, so i made it 40mm (nearly 2 inch) longer. Now my turbine is in the very front of the turbine support hatch and my batterys (2x 2S LiFepos and 1x 3S LiIon) are beside the front gear. I am not ready for the cg, but i think will not need much lead [;)]. Andi
Posted on: 3/9/2012 10:20 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10993056
RE: The New F86D Dog Sabre
Hi All, Here are the photos of my installation. In this configuration i have a gap of 1/2 inch (12mm) bewteen the bellmouth and the turbine. I would like to have the turbine around 40mm more in the front to do not use lead! For info: My pipe has a length of 605mm (23,82 inch) [image]http://img141.imageshack.us/img141/2605/turbine3.th.jpg[/image][image]http://img195.imageshack.us/img195/6496/turbine2.th.jpg[/image][image]http://img341.imageshack.us/img341/7042/turbine1.th.jpg[/image] Andreas
Posted on: 3/3/2012 12:54 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10984536
RE: The New F86D Dog Sabre
Hi Henry, I have to tell you, that this is not my first jet model i am building and i allways use the same procedure(and it workes). If i mount the pipe like seen on your photos and if i install my turbine as rear as possible i have a gap of over 1 inch between the end of my turbine and the bellmouth. Could you please tell me, what i have made wrong??. I want to install my turbine as foreward as possible, so i dont have to add lead and therefore the pipe has to be 2 inches longer. Its a little bit strange to tell me that i am wrong? It would be nice if you could maybe post a photo where i can see the mountig of a K80 and the gap between the bellmouth and the turbine? I you want i make a photo of my installation and and then you see, that the pipe is to short. I think i am not the only one, look a few post before people are writing, that the pipe should be longer are they wrong too?. kind regards Andreas
Posted on: 3/1/2012 11:41 PM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10983686
RE: The New F86D Dog Sabre
Hi guys, Last night tried to install the pipe and turbine. I am afraid the pipe is 2 inch to short!!. Henry if you read this, you should think over the length of the pipe!!. I now took off the bell mount and made the pipe 2 inch longer. Lucky my friend Pahl Gerhard who also built my turbine made the pipe longer for me. Now i can install the turbine as forward as possible. No clue, why the pipe is soooo short [:o]. How do the guys with a p60 do?. Andi
Posted on: 3/1/2012 4:51 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10982664
RE: Rc Large 1/10 scale Concorde
Hi, The concord dont exist anymore, unfortunately Franz crashed the concord in vilesse last year And it was a totaly lost. Andreas
Posted on: 2/11/2012 1:25 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10953725
RE: The New F86D Dog Sabre
Hi , @Deno: there are a few little problems, but as you said no major problems. If you can life with them (the canopy fits not very good[:o] and the big holes in the fuselage for the wing tubes) and the jet flies like henry promises, you get a solid model for your money. @greg: thanks for your answer, good to know that it is enough as it is ;-). a few "little" ;-)) mistakes in your german, but after 22 years good enough to order a beer in Austria :-)) Andi
Posted on: 1/29/2012 10:24 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10933725
RE: The New F86D Dog Sabre
Hi greg, could you post a picture of the rear? Iam afraid of, that the pipe could Move sidewards, if it Is only held by the cutout in the fuselage, when you have fast Movements. Sorry form my english [;)]
Posted on: 1/29/2012 9:42 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10933677
RE: The New F86D Dog Sabre
Hi, @ greg: How did you fix the pipe in the rear? Andi
Posted on: 1/29/2012 6:14 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10933482
RE: The New F86D Dog Sabre
Hi guys, Where did you install the recommended Gyro (G190), does anyone have a picture of the installation, and what would happen, if i dont use a gyro, are there any negatives without gyro?[sm=confused.gif] Andi
Posted on: 1/5/2012 4:46 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10892566
RE: The New F86D Dog Sabre
Hi meesh, seems to be a good idea[8D], as i understand you first fix the big tube in the fuselage, then you set the angle to 1-1,5°,then you fix the small tube and fix the antirotaion pins. very good idea!! thanks andi
Posted on: 12/21/2011 10:37 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10869980
RE: The New F86D Dog Sabre
Hi Guys, We are building up our dogs too, and the holes in the fuselage for the tubes (carbone and alu) are drilled much too big too!!. how did you do, did you clue the tubes into the fuselage?? i am not a friend of clueing them in, but what should i do?, the holes are about 5mm too big[:o]. In the pdf you cant see, how modellbau usa solved the problem, does anyone have photos, how the tubes are fixed in the fuselage?. My second question, where did you install the gyro? thanks for your answers Andi
Posted on: 12/21/2011 10:05 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10869938
RE: The New F86D Dog Sabre
Hi, Does anyone have news?, no one got a kit?, didnt get any mail from modellbauuk, is there a problem with the shipping, should be available since 6th of september?. Henry, how are the things? Andi
Posted on: 9/13/2011 10:29 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10714647
RE: The New F86D Dog Sabre
Hi Bstussie? [:D] I think that not many people can answer your question, because i think there will not be many kits out there right now. you have to wait a little time to get answers. Andi
Posted on: 9/8/2011 10:28 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10707317
RE: The New F86D Dog Sabre
Hi, I have preordered 2 kits of the F86-D and i dindt get any email too. I think ian is not ready yet to ship out the kits :-) Hoppefully soon i will get an email :-)) Andi
Posted on: 9/7/2011 10:29 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10705787
RE: Whats up with Jet Legend?
Hi, I bought a F16 1:6 from Jetlegend via Pollack in Germany. One of the Cyilnders for the geardoors was leaking. All i can say, never Jet-Legend again. The worst customer service i ever had. i asked jetlegend to please send me a new one, but Jetlegend first want me to send back the leaking one, because they dont belive its leaking, because of their good QC.??!!. Now guess, what it would cost to send back the cylinder to china and the customs i have to pay when the new cylinder come back (from Europe to China). Then i said O.K a compromiss could be, that i pay one cylinder anf get a second cylinder for free. Now chance from Jetlegend!!. So i bought a jet for 3000 Dollars and have to fight for a cylinder that costs 28 Dollars, nice Service for customers, NEVER AGAIN WITH ME. And at least my dealer (Pollack) also couldnt help me -> sell and hide. Didnt answer my mails for over one week and at the end didnt feel responsible for my problem. Now they lost a customer because of that f.....g cylinder Andi
Posted on: 8/26/2011 3:39 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10687813
RE: The New F86D Dog Sabre
Hi, YYEAAHH, I can see my two sets in the very front [:D], my turbine is already hot[:D] Seems, that Henry s gona ship tomorrow[:D]
Posted on: 8/4/2011 12:06 AM by Author "kasi122"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10654470
| 
