|
RE: SCAM on Classifieds
Thanks, it's good to know you guys are on it.
Posted on: 4/1/2012 5:49 AM by Author "keithtsr"
in the forum "Suggestions"
http://www.rcuniverse.com/forum/fb.asp?m=11023433
SCAM on Classifieds
Last night I was reading through some of the listing for Jets and I ran across a buyer names Mill Foster. This guy made a statement to the seller saying is this you last offer and are you an honest person..... I have heard this before, Craigs list. Back in October I was selling a high end Harley and I kept getting questions like are you and honest person and is this your last offer. These people wanted to send me a Cashiers check or a Bank check, sounds good right, wrong. They want to send you a Bank check with additional money sent in the check for shipping. They ask you to cash the check and send them the money for shipping and they will arrange shipping and have some one pick up the merchandise. The problem is that the check they send you is no good, but good enough to pass through your local bank. It usually gets discover a couple of weeks down the road and bam your on the hook for the bad check. I don't know really how to warn people about this crap, so please if you read this and you know how to warn people please help. KT
Posted on: 4/1/2012 5:06 AM by Author "keithtsr"
in the forum "Suggestions"
http://www.rcuniverse.com/forum/fb.asp?m=11023387
RE: HABU 32?
I fly an 11X. It was pretty simple to disable the steering with the gear up. Just keeps things from moving around and binding.
Posted on: 11/18/2011 8:34 PM by Author "keithtsr"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10818928
RE: National Jet Center?
New Mexico. Dry climate good weather lots of open areas. I know where there is about 10,000 acres.
Posted on: 6/15/2010 6:10 PM by Author "keithtsr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9805391
RE: rich model keecat.60 size kingcat with retracts
I know from flying the King Cat that it takes some down thrust, I can't remember how much. I keep thinking around 5 degrees. Another problem may be the wing in not being fully symmetrical. Then again it very well could be your incidence. You might try using longer copper tubing which will make the clunk line short, less chance for it to go forward.
Posted on: 4/14/2010 6:38 PM by Author "keithtsr"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9661081
RE: rich model keecat.60 size kingcat with retracts
Good luck Bigdave, how much down thrust did you put in yours. I am going with 5 degrees with my fan. Did yours settle down with power off.
Posted on: 4/14/2010 9:17 AM by Author "keithtsr"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9660160
RE: rich model keecat.60 size kingcat with retracts
I have always balanced my airplanes upside down, from BVM Bandits to my Habu. I check mine with the gear down, but check it both ways. It will make a little dif. because the nose gear is moving back, buttttt it will make very little dif., not much weight swing. I have decided to go with EDF on mine, should have it ready to go by the end of the week.
Posted on: 4/14/2010 9:00 AM by Author "keithtsr"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9660123
RE: Habu crashed, looking for cause?
Is this a BNF, or PNP. I have heard that the reciever is no good in the BNF. I have the BNF version and have had no real problems, but when I heard about the issues I switched out the rec. to a 7 channel. I have no idea if this is good info or not, just something to think about.
Posted on: 4/4/2010 5:51 PM by Author "keithtsr"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9637045
RE: !! Official !! Thunder T6 / AC6 Lipo Charger/Balancer Thread
Quick question or two, where do you get different balance boards for this charger. I run different lipos with different balance connectors. Ok maybe just one question. Thanks
Posted on: 3/18/2010 4:35 PM by Author "keithtsr"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9593059
RE: rich model keecat.60 size kingcat with retracts
Hi, I am wanting to go electric on my keecat. I have kick around the idea of edf, but would rather go with electric pusher. One little problem, I don't have a clue what to use. Can any one tell me a good set up in electric for high speed. I would like to run 8s lipos. I have the need for speed.
Posted on: 3/14/2010 11:18 AM by Author "keithtsr"
in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9580860
RE: Heads up JET JOCKS!
I worry about a mistake, one mishap, one serious accident, one violation and it's gives them, the FAA, something to stand on. I also worry that the AMA would tuck and run in any such event. Best to keep a cool tool, and a hot attitude with the AMA.
Posted on: 3/9/2010 9:13 PM by Author "keithtsr"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9568602
YS 45 problems
I have several YS 45 but I have one that sticks out...... This engine ran great for about 200 flights, then it begain to leak fuel back out of the carb......I replaced the dia, spring and plunger....runs super lean on top end, when idle back then to full throttle it runs super rich...Sooooo I went on a spending spree.....one peace at a time....needle valve, carb body, pump housing, gaskets, spray bar assembly a million different plugs and still same old thing.....I have runs this thing on 10 to 15% nitro with a nitro pipe.....HELP![font="Times New Roman"][/font]
Posted on: 1/27/2004 1:09 PM by Author "keithtsr"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=1472357
| 
