|
RE: quick fix?
or you may have a loose set screw on one of the out drives.
Posted on: 7/13/2012 12:06 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11154022
RE: Monsoon XTR
if you're gonna run the 30 % you want to run with a cold plug. My Monsoon seemed to be running a little on the hot side too but it was pretty hot here last week....I cut a vent in the windown on both sides to help cool it a little better. I run Byron 20% with 12% oil with an os 8 plug which is medium heat range.
Posted on: 7/10/2012 9:48 AM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11150044
RE: Earthquake 3.5 differntial
check to make sure there are no like no little nipples and what what not on the ring gear, I had them on a few diffs that I bought for that truck. if there are it won't spin in right in the housing. Just grind it down a tad and it should work.
Posted on: 7/5/2012 2:41 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11144375
RE: Does Redcat/HSP have an Electric 1/8th Truggy? Can it handle 6S?
look at the Monsoon XTE
Posted on: 6/27/2012 4:42 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11134364
RE: Any hobbyshops around city of industry that will fix redcat 1/5 slace
yeah what they said !
Posted on: 6/26/2012 10:02 AM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11132479
RE: Monsoon XTR Help
OS 8 is a good replacement if you burnt out the stock one .
Posted on: 6/24/2012 5:26 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11130273
RE: Arrgh - Why are lipos out of stock everywhere
Great album from Pantera.....although Vulgar Display of Power is my favorite !
Posted on: 6/24/2012 9:34 AM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11129822
RE: new backdraft 3.5 problems
I have the EQ 3.5 and I use Byron fuel with 20% nitro and 12% oil and use OS 8 glow plugs and it runs like a champ !
Posted on: 6/23/2012 1:44 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11128957
RE: Engine Quits when I squeeze throttle
try leaning both the needles out a tiny bit and see what happens.
Posted on: 5/27/2012 5:25 AM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11096005
RE: How Long Nitro Engines last ?
I dont think the Vortex comes with the SH.......but most likely you blew your engine...... you can either replace the piston and sleeve or just get a whole new engine.
Posted on: 5/26/2012 8:57 AM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11095316
RE: Monsoon XTR
the problem I see is that there are locknuts on the inside of these mounts both other nitros I have the engine srews directly into the mount so I loctite them.....I'll take another look and see if I can tightem em up.
Posted on: 5/26/2012 8:54 AM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11095315
RE: Monsoon XTR
hey dad I been meaning to ask you have you had any problems with keeping your gear mesh to stay. I keep having problems with keeping mine i think its because of the motor mounts beeing adjustable.
Posted on: 5/25/2012 12:00 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11094484
RE: Fuel pushing out of carb
prolly vapor locked ....blow compressed air directly on the carb see if that helps .
Posted on: 5/3/2012 2:47 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11067226
RE: Volcano s30 pullstart
yeah check your one way bearing....pop it out spray it down with some nitro cleaner or motor spray !
Posted on: 5/2/2012 4:48 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=11065989
Proline Tires MGT 3.0
anyone know if these tires will fit the stock wheels on the MGT 3.0 ? http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLN12&P=7
Posted on: 4/17/2012 6:56 AM by Author "kelynsdad1023"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=11045545
RE: Monsoon xtr
its a great truck built solid you'll have fun with it !
Posted on: 3/1/2012 2:25 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10983325
RE: ground pounder wheels
I would go on the the RCMT forum and there is a forum just for the ground pounder....ask Brett from CPE he will be able to help.
Posted on: 2/5/2012 6:42 AM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10944774
RE: Install exhaust to manifold
spray a little windex on the gasket before you slip the mnaifold on it and it will slide right on ! and thise exhaust seals or gaskets whatever you wanna call them are available at most local shops !
Posted on: 1/22/2012 4:35 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10922115
RE: Monsoon XTR
oh incidentally make sure to check all the nuts and bolts on your steering linkage is tight....mine was loose !
Posted on: 1/18/2012 12:31 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10915456
RE: Monsoon XTR
I like it so far...haven't really put it to the test yet still in the break-in process....gotta wait for some warmer weather to really beat on it. It seems like a really well built and tough R/C .
Posted on: 1/17/2012 12:19 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10913761
RE: Monsoon XTR
thanks dad I found it...I also found it in my manual I guess I just overlooked it...great truck so far.
Posted on: 1/16/2012 3:47 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10912205
Monsoon XTR
I got my Monsoon last week that I ordered through Kurt at URC.....started breaking it in today didn't finish though. Anyways one thing I noticed there is no diagram or anything in the manual of the truck showing what goes into what like in my other Redcat manuals,does ayone know if they are anywhere online...it would just be nice to have for reference when I have to take it apart when stuff breaks !
Posted on: 1/16/2012 3:20 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10912152
RE: Best place to buy parts/upgrades
+ 1 on Kurt ! [quote]ORIGINAL: billymare Kurt at URCHobby.com is my go to place. [/quote]
Posted on: 1/6/2012 12:59 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10895069
RE: Avalanche xte or hurricane xte or backdraft 8e?
well I just ordered the Monsoon XTR through URC should be here next Wednesday looking forward to it.
Posted on: 1/6/2012 12:57 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10895066
RE: bogging/dieing under load
how hot is your engine getting? if you have a temrature gauge check the temp on the top of the glow plug.... if you're using 20 % nitro you should be any higher than around 260 on that engine. I would say you're probably too lean. I would set the high spped needle flush with the collar and tune in small increments from there.
Posted on: 1/6/2012 12:55 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10895060
RE: Tricks and Tips to keep your Redcats running!
good advice !!!!
Posted on: 1/6/2012 9:38 AM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10894734
RE: Earthquake 3.5
if you get the metal spur just make sure your mesh is dead on cause if its not it will strip the bell gear..... if the mesh is right it will definately last a long time !
Posted on: 12/23/2011 3:12 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10873503
RE: Redcat carb settings
the high spped needle 2.5 -3 turns out and the low speed needle flush with the edge...these are good starting points.
Posted on: 10/15/2011 4:35 PM by Author "kelynsdad1023"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10766996
RE: VP Powermaster Fuel
seems to be pretty good fuel,burns cleaner than Byron. My only complaint about it is that it is clear. I've only run it in my Earthquake 3.5 haven't tried it yet in my MGT 3.0.
Posted on: 10/10/2011 4:23 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10758655
VP Powermaster Fuel
do any of you guys run this fuel or tried this fuel in your cars or trucks ? how is it,oil content and what not ? I just bought a quart today from the LHS to try I usually run Byrons gen2 20 %.
Posted on: 10/7/2011 5:21 PM by Author "kelynsdad1023"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10753817
| 
