|
RE: Fleet Brotherhood
Built in 2004 G-38 Solartex:: painted Cream and Maroon :: water based nelson paints:: Futaba 24 Ghz with Hi-Tec HS-645 MG
Posted on: 9/17/2012 6:08 PM by Author "knucklebutt"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11231740
RE: Fleet Brotherhood
Now here's something I have just changed: I have always used the Du-Bro 6" inflatable tires: Flying off asphalt my Fleet can get a little squirley , especially on landing roll out. It would tend to scrape a wing tip as the inflatables were a little squishey (is that a word?) It was suggested I switch to hard rubber, which I did today. I had some Sulliavan aluminum hub 5". Made a huge difference. Tracked easily all the way down the runway on take off, and absolutely tendency to dig in a wing tip. I just ordered the Du-Bro 1/3 cub wheels, per Ray W. (see prior thread) I flew this airplane off grass for years and of course had no issues, not so with the asphalt.
Posted on: 9/17/2012 5:01 PM by Author "knucklebutt"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11231661
RE: Fleet Brotherhood
Shoot I'm in. I built and flew one back in 1987 (see pic in the other thread) have one actively fly now (actually flew it today) and have a new one in the box to build Denis
Posted on: 9/17/2012 4:48 PM by Author "knucklebutt"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=11231642
RE: Concept Fleet Biplane
Ray: What wheels are you using on your Fleet ?? Denis
Posted on: 9/17/2012 11:37 AM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11231298
RE: Concept Fleet Biplane
Know what your mean: The Fleet will do a nice barrel roll but it certainly takes up a whole bunch "O" sky doing it I kinda like the Low and Slow flying
Posted on: 9/9/2012 4:44 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11223093
RE: Concept Fleet Biplane
Todays Fleet: Built in 2002, Hundreds of flights: Its even been completely overhauled re-covered and painted in 2010, G-38, Coverite, Nelsons paint, 22 lbs actually flew it a bunch last week; Note: I did just purchase a new one, and sadly also received an E-mail stating I was receiving the last one, as his health was causing him to shut down
Posted on: 9/9/2012 3:11 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11223028
RE: Concept Fleet Biplane
Hey gang: Just found this thread: Been active with the Concepts Fleet since the 1980s. Actually here's my first one, I think about 1987. Funny thats my two kids posing with the plane who are now, Daughter 28, Son 30.
Posted on: 9/9/2012 3:05 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11223025
RE: Balsa USA 1/4 Scale Nieuport 28 Build
SDP Waaaah Waaah Those aren't Stringers These are stringers !!!!!!!! [:D] [:-]
Posted on: 9/8/2012 5:28 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11222177
RE: Balsa USA 1/4 Scale Nieuport 28 Build
[quote]ORIGINAL: SkyPilot101 I know its common to sing our praises to SDP, But this time NuckleButt has done a outstanding job on the Pilot & Gun [:D] As you said SDP, Time to step things up in the cockpit! [/quote] Just for everyones FYI: SDP is one of those who freely gives of his time in flight instruction, test flying and especially helping others in their build process, cripes he's given stuff away most would expect a bunch "O" money for. So the decision to utilize MY time to do these side projects was an easy choice.
Posted on: 8/5/2012 9:36 AM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11181629
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Sneak Preview BUCK AND HIS GUNS::::
Posted on: 8/4/2012 1:36 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11180883
RE: Sig 1/4 J3 Kit converted to PA-18 Super Cub (Build)
An ARF !!! I want a DIVORCE [>:]
Posted on: 7/24/2012 4:00 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11167774
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Will "Inserts" be strong enough for the pull on flying wires ? I usually use "Blind Nuts" I guess we will find out huh ???[:D]
Posted on: 7/9/2012 2:43 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11149096
RE: Balsa USA 1/4 Scale Nieuport 28 Build
I used the Sullivan wire for the Fleet. I think you have seen how that install worked. They are functional somewhat: now the Ryan were 100% functional and used the " Straps" that proctor sells as well as their "turnbuckles" I can elaborate if needed.
Posted on: 7/8/2012 6:01 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11147999
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Made a cradle out of a 3" chunk of foam that came in a computer box, just an idea, you how it goes you look around the house for something that fits your needs
Posted on: 7/8/2012 8:13 AM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11147436
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Unless he only changed his clothes once a month ??? huh ?????
Posted on: 7/4/2012 5:23 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11143214
RE: Balsa USA 1/4 Scale Nieuport 28 Build
But did he fly it: didn't see any wood nor did I see any welding, kinda wierd and what engine was that ???
Posted on: 7/3/2012 3:54 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11141794
RE: Balsa USA 1/4 Scale Nieuport 28 Build
That is just way too cool: I want one !!!!!!
Posted on: 6/28/2012 7:46 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11135879
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Good Call ::::::: Unfortunately I have had to eliminate items that LOOKED way cool but just didn't work on flyability The Fleet is next when it cools off, I have the same issue, I'll go to a more Standard wheel/ Denis
Posted on: 6/26/2012 7:30 AM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11132303
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Crossbraces: I dont use the block, I Pencil line, cut with fine razor saw, true up with the sanding block, find I have sanded too much, chuck the part and have a second go. I use yelloe wood glue and pin if necessary. Of course if the cut is correct there will be no need of this pin (referr to statement above) How was flying yesterday: What did John Crash
Posted on: 6/26/2012 7:16 AM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11132285
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Got ya covered in the "Fiberglass " dept. I'll be doing the Fairchaild in about a month [8|]
Posted on: 6/17/2012 3:11 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11121552
RE: Balsa USA 1/4 Scale Nieuport 28 Build
[size=3]"The inaccurate plans is annoying but easy to overcome."[/size] Welcome to my world [:@]
Posted on: 6/9/2012 9:20 AM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11112345
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Looks good lets go with BUCK !!!!!
Posted on: 6/3/2012 7:05 AM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11104632
RE: Balsa USA 1/4 Scale Nieuport 28 Build
That guy looks a little German to me, they actually show an iron cross next to the figure Hummmmmm ??
Posted on: 6/2/2012 6:46 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11104179
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Gunther: now if I only wanted to build German planes: not really sure what to do with him ??
Posted on: 6/2/2012 6:29 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11104166
RE: Balsa USA 1/4 Scale Nieuport 28 Build
See he knows some of my secrets [>:]
Posted on: 6/2/2012 6:13 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11104153
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Gotcha Covered Buddy !!!!
Posted on: 6/2/2012 6:08 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11104149
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Good lord your up early, and your not even going out to the field today [:D]
Posted on: 5/22/2012 6:18 AM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11090199
RE: Balsa USA 1/4 Scale Nieuport 28 Build
[quote]ORIGINAL: roncannell Red Wing, if your not going for the ultra scale look cut a hole for the velocity stack and you can choke your g26 with your thumb in the stack. [/quote] Ron you should be ashamed you even posted that[:D] [:D][:D][:D][:D][:D][:D][:D]
Posted on: 5/4/2012 6:54 AM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11068067
RE: Balsa USA 1/4 Scale Nieuport 28 Build
Tail Cone: probably just a reference to the "Butt End" One Issue I will have with the Fairchild is all those Fuse stringers. If you EVER grab anywhere that has stringers their gonna break. Once its covered its impossible to fix. The Fleets the same way Denis
Posted on: 5/2/2012 1:37 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11065757
RE: Balsa USA 1/4 Scale Nieuport 28 Build
CA is good for some of the inside joints, but anything that might need sanding good ole wood glue for me Denis
Posted on: 5/1/2012 5:32 PM by Author "knucklebutt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11064625
| 
