|
RE: ys 160dz Question ?
Thanks bjr_93tz
Posted on: 5/18/2013 4:07 AM by Author "kobi"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11515007
RE: ys 160dz Question ?
Thanks petec I also question the producer and this is what they replied: Dear Mr. HAMTZANI DZ160 and other our engines have holes. The room inner the valve cover connects to inlet manifold. The room is used as the air chamber. Thank you very much. Best Regards Naohisa Yamada
Posted on: 5/18/2013 4:05 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=11515006
RE: ys 160dz Question ?
Thanks But I do not really understand you
Posted on: 5/16/2013 1:06 AM by Author "kobi"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11512900
ys 160dz Question ?
Helllo Today I changed the valve springs of my engine dz160, I noticed that have six holes around the inlet valve in the cylinder head ( Attached Image ) My question what these holes are used ? Thanks kobi
Posted on: 5/15/2013 4:16 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=11512027
RE: 2102 FAI/F3A EUROPEAN CHAMPIONSHIP
hello I can not open the PDF file of the results Does anything help me please Thanks kobi
Posted on: 7/30/2012 12:53 AM by Author "kobi"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11174151
RE: dz160 stop in Loud noise
Thank you for answers If it's very disappointing because of a momentary mistake like lean the engine Can be caused damage to the engine, What, who designed the engine did not think that an error can happen ?
Posted on: 4/1/2012 1:39 PM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=11023920
dz160 stop in Loud noise
the engine again ) 2. How do you recommend me to find the max rpm ? Thanks kobi
Posted on: 3/31/2012 12:43 PM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=11022585
RE: YS Super Mount 3
Hello Alejandro Thank you for the answer I learned something new I did not know kobi
Posted on: 3/6/2012 9:51 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10988750
RE: YS Super Mount 3
Thanks Alejandro P. Can you tell me by what you see in the picture If what I have is the SM 2 OR SM 3 ? Best regards Kobi
Posted on: 3/5/2012 10:51 PM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10988273
YS Super Mount 3
hello I bought a new YS Mount ,And I see it larger than the last i have ( Looked on the attachment ) is ys do a new engine mount ? and Is the new mount Better than the last ? Thanks kobi
Posted on: 3/4/2012 12:00 PM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10986177
RE: YS 170 CDI on low nitro
hello Arch Can you please explain the exact reason why the 170CDI could be used with less than 30% nitromethane, And my engines I have DZ160 Can not work on 15% Cool Power ? Thanks kobi
Posted on: 8/24/2011 11:27 PM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10686139
RE: how hard I have to close the prop nut ,dz160
kobi
Posted on: 6/24/2011 8:31 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10590140
RE: how hard I have to close the prop nut ,dz160
Thank you for your answers I think to use a small thin plywood or Nylon spacer between the spinner and the drive washer To prevent The slipping and damage to the drive washer , What do you think about this idea ? Chip - i use a 17x12w apc prop kobi
Posted on: 6/23/2011 4:43 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10588036
how hard I have to close the prop nut ,dz160
hard need to close the prop nut ? Thanks kobi
Posted on: 6/22/2011 1:23 PM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10587074
RE: prop apc 17x12w for dz 160
Hi Arch i use in the new short pipe style,So as you say I need to replaced the o-ring as maintenance I did not know it until now Thanks kobi
Posted on: 5/13/2011 6:57 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10517344
RE: prop apc 17x12w for dz 160
Hi Alejandro Next time when I will fly I'll check it. I was torn rubber hatori silencer, I ordered a new rubber band and I'm waiting for her to reach I tore the rubber after about 50 flights do you have to give me an idea how to prevent this problem in future ? Regards kobi
Posted on: 5/12/2011 1:29 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10515252
RE: HS needle not change maximum rpm dz160
Between the HS needle and the pump Screw ? Thanks kobi
Posted on: 5/1/2011 2:58 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10494229
HS needle not change maximum rpm dz160
? Thanks kobi
Posted on: 4/30/2011 1:57 PM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10493356
RE: prop apc 17x12w for dz 160
of the engine set up ? Thanks kobi
Posted on: 4/30/2011 8:22 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10492998
RE: prop apc 17x12w for dz 160
Thanks petec Thanks Alejandro
Posted on: 4/26/2011 10:50 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10486090
prop apc 17x12w for dz 160
hello my question is it prop apc 17x12w for dz 160 is good ,or too much load to this engine ? What I've read in this forum that the Most , users at apc 17x12 not the wide in this engine . Thanks kobi
Posted on: 4/25/2011 9:39 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10483847
RE: Rapicon 30% 2C fuel for 160dz
What other types of fuel you can recommend me ?
Posted on: 12/4/2010 7:07 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10175259
Rapicon 30% 2C fuel for 160dz
hello I want to ask whether the Rapicon 30% 2C fuel Suitable for use in YS 160 DZ engine ? Until now, i use the COOL POWER 30 % fuel with Very satisfied . But currently lacks this fuel type in My area and I'm looking for another type of fuel. Thanks kobi
Posted on: 12/4/2010 2:48 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=10174979
RE: Karbonite gears servo
Hi Bob So you say I understand you do not recommend on Karbonite gears servo, My problem is I can not find in futaba and hitec Manufacturers good nylon gears servo Can you recommend me Which servos I can buy these manufacturers kobi
Posted on: 10/20/2009 10:25 AM by Author "kobi"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9187848
RE: Karbonite gears servo
Thank you for your answers To : Steve in the elevator i use dual pushrod with one servo,I saw a lot of pattern model that Using this method with nylon gears servo,So if I use with Karbonite gears servo (that more strong than nylon) I understand that I do not take risk ? kobi
Posted on: 10/19/2009 5:32 AM by Author "kobi"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9184623
Karbonite gears servo
hello I want to ask what do you think about this servo : Hitec HS-7975HB V2 Digital High Resolution HS KG http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTHR7&P=7 1. Is type of Karbonite gears Could be good to 2mx2m pattern model ( with dz160 engine )? 2. Are there any of you experience with Karbonite gears ? 3. Is Karbonite gears better than metal gears to pattern ? thanks kobi
Posted on: 10/19/2009 2:27 AM by Author "kobi"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9184507
RE: Kevlar pull pull for elevators ?
i use this : Sullivan Composite Flex Rod 2-56 48" (1) to elevator from towerhobbies - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXFV43&P=7 it is a carbon fiber No effect of temperature and Works fine on 2m model
Posted on: 10/15/2009 11:13 AM by Author "kobi"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9175168
RE: Fuel system in dz160
Thank you for the answer kobi
Posted on: 9/23/2009 11:58 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=9117913
Fuel system in dz160
hello I'm trying to learn the theory of the Fuel system in dz160 , My question is What's the use of tube that Connected between the front part of the pump to the Body of the engine ( near the nose ring ) in the dz 160 engine ? thanks
Posted on: 9/22/2009 9:27 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=9114879
RE: starter to dz160
Thanks Frank I'm looking for a long time That kind of starter kobi
Posted on: 8/16/2009 5:12 AM by Author "kobi"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=9019796
| 
