|
RE: Hurrax Pyrad Build
were is the track that you run at up in B.C.
Posted on: 10/9/2010 12:38 PM by Author "lauterbacher"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10057724
RE: Welcome to Club SAITO !
If your valves were to be out of adjustment, Would this affect drawing of fuel to your carb?
Posted on: 8/8/2010 9:06 PM by Author "lauterbacher"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9919677
RE: Welcome to Club SAITO !
Looking for some advice, I own a saito 125 and I really overheated it and now after cooling off I'm down on power. Were should I look for the problem? thanks
Posted on: 8/8/2010 11:34 AM by Author "lauterbacher"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9918571
RE: gas fuel with glo plug no ignition
Has anyone tried the Gas / Glow setup with a Saito 125 4-stroke.
Posted on: 7/29/2010 11:29 PM by Author "lauterbacher"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9898089
RE: Welcome to Club SAITO !
I have a recently new saito golden knight 125 that I got way to hot ,well it's running again but compression is down a little. would a simple ring change fix it. thanks.
Posted on: 10/11/2009 9:15 PM by Author "lauterbacher"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9165002
RE: Byron A-4 Skyhawk EDF conversion
can you doppler your A-4 , it looks great.
Posted on: 7/20/2009 10:01 PM by Author "lauterbacher"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8950393
RE: Byron A-4 Skyhawk EDF conversion
Any luck on getting you're plane flown yet?
Posted on: 6/14/2009 11:19 AM by Author "lauterbacher"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8850860
Need a fuel Answer
I have been using O'donells 30% nitro in my two r/c cars I race, well I got tired of paying 40.00 a gallon and said I'll try some traxxes 33% nitro fuel, Well first thing that happens to both vehicles one a 4-stroke truggy with a saito 125 in it , and the other a standard 2 stroke in an associated SC-8. well they both drop about 35 to 40 degrees in run tempature with a lower Idle. this is great but I'm wondering what the heck is the difference in the fuel. anybody have a clue?
Posted on: 5/30/2009 1:41 AM by Author "lauterbacher"
in the forum "RC Fuels"
http://www.rcuniverse.com/forum/fb.asp?m=8810622
RE: Dynamic 1/5 on road
You can buy parts direct from bergonzoni in Italy.
Posted on: 4/29/2009 7:43 PM by Author "lauterbacher"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=8726986
RE: Byron A-4 Skyhawk EDF conversion
Whats so special about these eon packs your getting, just curiosity?
Posted on: 4/27/2009 3:42 PM by Author "lauterbacher"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8719803
RE: Byron A-4 Skyhawk EDF conversion
You should buy a couple othe XPS packs that are out and talked about on R/C Groups. take care
Posted on: 4/20/2009 2:19 PM by Author "lauterbacher"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8698878
RE: Byron A-4 Skyhawk EDF conversion
When are those batterys coming in for you so we can see your testing?
Posted on: 4/18/2009 11:17 PM by Author "lauterbacher"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8694398
RE: Lightest truggy tire
Thank you very much.
Posted on: 4/15/2009 11:54 AM by Author "lauterbacher"
in the forum "RC Truggy"
http://www.rcuniverse.com/forum/fb.asp?m=8683760
Lightest truggy tire
Anyone have a idea what the lightest ready to run pre mounted truggy tire would be?
Posted on: 4/14/2009 10:10 PM by Author "lauterbacher"
in the forum "RC Truggy"
http://www.rcuniverse.com/forum/fb.asp?m=8682249
RE: My Sherman gets additional armor and other mods
what scale is your sherman?
Posted on: 3/2/2009 4:43 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=8536399
RE: upcoming sound engine sound module
Whats the update on this sound unit?
Posted on: 1/18/2009 8:39 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=8373723
12 volt gun elevation esc
anyone know were I could pick up a 12 Volt gun elevation esc. thanks
Posted on: 12/30/2008 12:26 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=8298611
RE: Sound options
were can the tamiya sound unit be bought, and yes I need to know if the sound unit for el mod or tamiya can be used. I thought that all that was needed was to run the sound unit off the throttle channel?
Posted on: 12/15/2008 9:38 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=8249745
Sound options
Well I've ordered two electronize speed controllers for my 1/6th tiger that will be running on 12 or 24 volts. But now I need sound and was wondering what are my options other than the Benedini unit. thanks
Posted on: 12/15/2008 7:45 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=8249310
RE: ESC Repair
Mr. Blitz how many volts can the EL mod run.
Posted on: 12/13/2008 11:38 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=8243452
RE: ESC Repair
again I know which route I will take if I have to replace this unit, But again You think that someone would be able to repair these units and make some money at it to.
Posted on: 12/12/2008 11:55 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=8240389
ESC Repair
I have purchased a 1/6th scale Mark 1 tiger Tank from the U.K. and it has a bad esc. it comes combined with a sound card setup that works, to replace with there product it will cost about $500.00 . any one know who does repair. I know I can switch to something else.
Posted on: 12/12/2008 4:26 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=8239186
A how to question on tracks?
I'm thinking of making a 1/6th scale abrams. everything seems pretty straight forward to me except in the making of the tracks. Any suggestions of the best way to do this whether it's machining or is there a tank thats built that there tracks could be used. thanks
Posted on: 8/31/2008 7:01 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=7905921
How Much is IT!
I'm seriously looking to buy a 1/8 or 1/6 th scale tank. But here's the rub . I read post after post about people saying that if you buy one of these tanks there $3,000.00 and up. well I've checked around and it seems that they are starting more like $5,000.00 and up. or do you tanker people know were these $3,000.00 tanks are. you in put would be greatly appreciated. thanks
Posted on: 8/26/2008 12:00 AM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=7886435
Wanted
Anyone have one of the 1/9th scale abrams for sale. The old Walmart ones? thanks
Posted on: 8/23/2008 10:56 PM by Author "lauterbacher"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=7878542
RE: technokit jr/xrc info
I have one of you're technokits and love it, but we need a U.S. distributor that sells and carrys parts?
Posted on: 7/7/2008 5:04 PM by Author "lauterbacher"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=7703963
RE: Welcome to Club SAITO !
I hope I'm clear here, the threads are 8 x 1.25. But the shaft behind the threads is larger. looking for an exact measurement
Posted on: 7/6/2008 8:00 PM by Author "lauterbacher"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7700284
RE: Welcome to Club SAITO !
no it's larger and I would like to know because of some drilling issues. anyone out there have a set of calipers they could check there engine shaft with? thanks
Posted on: 7/6/2008 7:57 PM by Author "lauterbacher"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7700269
RE: Welcome to Club SAITO !
I just purchased a saito 125 knight that I will be getting this tuesday from horizon. I know it comes with 8x 1.25 threads but can someone tell me what the exact diameter of the non threaded shaft is? thanks
Posted on: 7/6/2008 6:57 PM by Author "lauterbacher"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7700063
RE: Genisis fuel tank size
thanks for the replys.
Posted on: 5/23/2008 1:21 PM by Author "lauterbacher"
in the forum "CEN Racing"
http://www.rcuniverse.com/forum/fb.asp?m=7531804
| 
