|
Extreme Tournament Indoor Christmas 2012 SPAIN
[b]VIDEO Aperture event with DONATAS PAUZUOLIS.[/b][size=3][/size] [size=6][link=http://www.videofy.me/hobbyspaintv/362150]DONATAS PAUZUOLIS in SPAIN[/link][/size]
Posted on: 1/12/2012 3:53 PM by Author "lyka"
in the forum "Electric Indoor & Micro RC Flight"
http://www.rcuniverse.com/forum/fb.asp?m=10905695
BLOG F3A Spain competicion
[size=3][/size][b][/b][color=#3300CC][/color][link]http://f3asportspain.blogspot.com/[/link]
Posted on: 10/1/2011 4:37 AM by Author "lyka"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10743261
New F3A Video site web in VIMEO
[b]F3A Aerobatics World.[/b][size=2][/size] [link]http://vimeo.com/groups/f3a[/link] For everybody, for to share our F3A videos.... All are welcome !!!
Posted on: 10/1/2011 4:33 AM by Author "lyka"
in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10743255
RE: New Krill Spark Evo I- Build Thread.....
About these questions, our set-up... cheers...
Posted on: 3/15/2011 4:32 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10402246
RE: New Krill Spark Evo I- Build Thread.....
[b]In action.... ( Spanish Version)[/b][size=2][/size]...coming soon in English version ( is in the oven )[:D] [youtube]http://www.youtube.com/watch?v=-G3hmBa1ZsI[/youtube] [size=2]ENGLISH ( sub-titled ) ready !!!![/size][b][/b] [youtube]http://www.youtube.com/watch?v=JouIZ9y92mM[/youtube]
Posted on: 2/20/2011 2:41 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10350505
RE: New Krill Spark Evo I- Build Thread.....
Really, very nice colours....I can to imagine your anxiety for first flight !!!!...good luck !!!!... Andres Girabel
Posted on: 2/20/2011 12:41 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10350501
RE: New Krill Spark Evo I- Build Thread.....
Hi Joenella...probably tomorrow we will take any vid´s . . . cheers !!!!!
Posted on: 2/18/2011 12:50 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10345940
RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: flyboy91 Andres, Congrats on flying the model!! From the short video and the write up you have it seems like you have a very well setup plane that will take a little getting use to for flying. I'm hoping to be home within a week and can report back on flying my model. The fortunate side of being on the road in Yuma Az was I was able to take my Spark Dynamic with me and get some really good flying in. As a side note I have been asked by Krill models to help distribute Krill Models in the US. So if anyone is out in Pattern/IMAC land and are interested in getting a spark Dynamic or Evo email me at andrewjesky@gmail.com and I will get you a quote. The latest news I got from Ivo was the airplanes took about 3 weeks to process and ship from the factory. Andrew [/quote] Hi Andrew !!!.. For us it is very important your opinion and our set up part of what you've described in this thread. Have been few test flights, however we managed to find the correct CG, 50 mm behind of cabon wing tube. The snaps very slow ... we need to change the aileron link assembly as shown in the PDF.In our opinion the aileron surface is short, but is good for slow rolls...you know, each pilot have different feels !!!... So far we can only provide this information, as we expand by test data to share and wait your advice. cheers !!!
Posted on: 2/14/2011 1:41 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10335948
RE: New Krill Spark Evo I- Build Thread.....
About it completely if, it was our big question ... but visually it is fantastic ... In flght, the wing and elevator tips in white colours make a great contrast to how far you can instantly see very clearly. cheers
Posted on: 2/13/2011 2:56 AM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10332220
RE: New Krill Spark Evo I- Build Thread.....
[youtube]http://www.youtube.com/watch?v=9M_zkGliVj0[/youtube]
Posted on: 2/12/2011 5:31 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10331525
RE: New Krill Spark Evo I- Build Thread.....
Today was the debut day ... to tell the veterans of the F3A what it means to configure and set a new plane ... well, too ... new kind of engine , new servos with better feel ,and the SPARK Evolution 1 really is another plane, has nothing to do with its previous version. To avoid a long history... 10 flights, approximately 28 landings and takeoffs and one table P-11 as a summary of the day .... Result ? : successful .... the Q80 far from being a beast on the contrary .... manageable power, consumption that do not exceed 2180 mA in a table P-11 (calm day) and substantially very quiet, apart from having "character"when rounding a figure .... The plane, high noble, well-balanced speed and low speed very well behaved. Inefficiency of ailerons in Snap figure , very good performance rudder and elevators effective. The GC has a lot of work to find .... at last it seems that the point is ... excellent performance in the integration of the figure "M", easy to handle soft and nice tonels... decrease speed is possible.... I leave any photo of the day and probably tomorrow a trailer video. Greetings
Posted on: 2/12/2011 2:15 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10331089
RE: New Krill Spark Evo I- Build Thread.....
JAson, Hi man !!!.... In our last version spark we were using the short arms also, nevertheless, Jonathan (my son and pilot) he was always insisting that for the snaps he needed more authority, therefore playing with the exponential ones was not managing to achieve the effect. We are going to try with these and I will comment to you on the experience, simply ( I know, it´s much)I have increased in 7 mm the distance with regard to the used one previously. ... and how the children become very heavy, and in particular when it treats about the pilots, it is better to do and to have to listen to complaints, murmurs, and other things....he heh hehe hehe eh !!!![>:] Andres Girabel. cheers
Posted on: 2/11/2011 12:54 AM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10327825
RE: New Krill Spark Evo I- Build Thread.....
more pics...
Posted on: 2/10/2011 3:19 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10326844
RE: New Krill Spark Evo I- Build Thread.....
Andrew...and the CG ????..do you have any reference ????... cheers
Posted on: 2/9/2011 12:42 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10323814
RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: joenella Hi Andres Any pictures of the aileron servo installation? [/quote] HI Joe..... in two days I´ll work over the wings....I was seeing the servo place and I think it will be easy to install, much easier than the previous model of SPARK .... Today I worked on the rudder horn ... careful with the chosen site, because the internal block is not very big ... the size of the servo arm should be 80 mm long.... cheers !!!
Posted on: 2/8/2011 2:05 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10321541
RE: New Krill Spark Evo I- Build Thread.....
Look advance...pics.
Posted on: 2/5/2011 11:41 AM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10314621
RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: elan120 [quote]ORIGINAL: lyka Hi Jon....Not in our case, below or above there is no difference. Just remember to have cut the stab tube two millimeters On the wings, no difference gap. [/quote] Hi Lyka, Thank you for the input. I am also having similar problem where stabs don't fit against the fuselage flush, so hoping you have some suggestions. Could you help explain
Posted on: 2/5/2011 11:37 AM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10314617
RE: New Krill Spark Evo I- Build Thread.....
Hi Andrew !!!... fantastic scheme!! ... looks great .... Query: CG point ... where?????....behind carbon wing tube ????..10 mm ?????..around ?????.....if do you have reference for to start ? cheers Andres Girabel!
Posted on: 2/1/2011 1:34 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10305198
RE: New Krill Spark Evo I- Build Thread.....
Hi Jon....Not in our case, below or above there is no difference. Just remember to have cut the stab tube two millimeters On the wings, no difference gap.
Posted on: 2/1/2011 12:08 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10305155
RE: New Krill Spark Evo I- Build Thread.....
Pics and details...
Posted on: 1/29/2011 1:03 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10298082
RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: jon bruml Andres Thank you for the speedy response. Although I have not seen a Spark before the quality of this plane seems quite impressive To be clear you are mounting directly to the nose of the plane with 4mm bolts? Are you placing the 2mm carbon plate between the motor and the spinner ring inside the plane? [/quote] Hi Jon.... Exactly. When I start working at this point I could indicate how many millimeters is the plate .... the moment the idea is that we have discussed. You can get more info in http://www.rcuniverse.com/forum/m_9477756/mpage_3/key_/tm.htm greetings
Posted on: 1/26/2011 3:17 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10290888
RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: jon bruml Lyka Can you please provide some details on how you plan to mount the q80. My Evo 1 arrived today and I also am planning to use the q80 thanks Jon [/quote] Jon ..... Simply mount to the front with four screws M4 (on a 2mm carbon backplate) and from behind with a 10 mm dowel inserted into a backplate of 2 mm. This dowel was inserted into the rear bearing motor . I seems
Posted on: 1/26/2011 1:15 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10290586
RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: Torben Parsberg Hi nice plane its only4771g you have 2* stabilizer tube [/quote] Ohhh...!!!...most best...-17grs. !!!!..thank you !!!!
Posted on: 1/26/2011 8:33 AM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10289818
RE: New Krill Spark Evo I- Build Thread.....
Hey guys.. Today has arrived ... First steps in the assembly. GREY background values are for catalog and / or estimated in this thread. Rest of actual values obtained in this kit for me more coming soon
Posted on: 1/25/2011 12:54 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10287689
RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: rcpattern I never liked running them on glow planes as I think the vibration wears on them more, especially on the ailerons, but on electric with the little/no vibration they work great. Arch [/quote] Of course !!!!...now I understand ....you know !!!!..thank you Arch....
Posted on: 11/19/2010 1:41 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10145607
RE: New Krill Spark Evo I- Build Thread.....
[quote]ORIGINAL: rcpattern Lyka, I have been running the BLS-551's on the ailerons of my Wind and I love them. Great speed and centering. You will have no issues with them. Arch [/quote] Frankly I do not remember when, but for quite some time I used a car servos on a plane and had problems with the center position ... be a defect circumstantial or, is that I'm getting old!!!!!!! Okay
Posted on: 11/19/2010 9:37 AM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10145113
RE: New Krill Spark Evo I- Build Thread.....
Hi Andrew...a lot of time !!!!.. One questions about your selected servos... the Futaba BLS 551 on Ailerons, is this servo aplications in cars????. if this ok, are you have problems with center positions ????...I can to see this servo have a good weight !!!!...good choice !!!!.... 44grs each !!!! My son, Jonathan is waiting your Spark EVO 1 for midd december, in black scheme.... best regards, Andrew !!!
Posted on: 11/19/2010 7:25 AM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10144934
RE: Two new F3A outrunners from Hacker
Thank you, Morten....good job.
Posted on: 8/1/2010 7:30 AM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9902715
RE: Two new F3A outrunners from Hacker
thank you Andrew, since you always share your experiences... thank you very much again... We will study thoroughly this information, they will be thought for the next decisions. cheers.
Posted on: 7/4/2010 7:23 AM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9843610
RE: Spark F3A, from Krill Models - SPAIN TEAM
Nice report, Don.....many thanks. greetings and cheers. Jonathan and Andres Girabel
Posted on: 7/2/2010 12:26 PM by Author "lyka"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9840575
| 
