|
RE: monsoon xp manual
i was at the same website, but did not see it. Put my glasses on, read your reply, and there it was. lol. thanks for your reply
Posted on: 5/9/2011 8:45 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10511285
RE: monsoon xp manual
thanks for the reply. the monsoon xp is the older model without the pivot ball suspension. not the xtr
Posted on: 5/8/2011 11:02 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10509405
monsoon xp manual
hey guys, i purchased a older model monsoon xp brand new at a garage sale. It was in the original box. however, it was missing the owners manual. does anyone have one. i have searched the internet with no avail. can anyone help me?
Posted on: 5/8/2011 8:58 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=10509275
RE: Redcat Monsoon Thread
glad you love your monsoon. I have the older model with some of the upgrades listed in this thread. One of the best mods was changing the diffs and clutch bell, it made it a whole new animal. Also,i have found the losi mach 26 drill start backplate works the best, well besides the starter box version. Good luck and enjoy t
Posted on: 8/2/2010 10:14 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=9906866
RE: Engine Mounts
hey mick, is that the servo from servoman on ebay. if it is how do you like it?
Posted on: 4/3/2010 11:54 AM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=9634212
RE: Engine Mounts
you can use a sportswork .26 on your sh .28. bolts right up. also, you might have to widen the hole where the bump box wheel engages the fly wheel. i have done this to my older monsoon and i love it. no more one way bearing.
Posted on: 4/2/2010 1:45 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=9632243
RE: dies after jumping
thats a great point. I will check the carb and make sure the gap is correct. Later today I will take a jump and then check the carb to see if it closed. Thanks bro. I hope this is my problem.
Posted on: 2/7/2010 2:28 PM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9484771
RE: dies after jumping
yes it does. One or two pulls. It runs great until I start hitting the jumps.
Posted on: 2/7/2010 1:42 PM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9484627
RE: dies after jumping
I thought about that to. I replaced with a new one and made sure it was good and tight.
Posted on: 2/7/2010 1:26 PM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9484571
dies after jumping
I need help gents. I have a torpeda that I recently put a xtm 24/7 in it. Well, I have put 12 tanks of fuel through her and decided it was time to do some jumping. Here is the problem, after landing the jump the buggy dies, just shuts off. I have put a new fuel tank and fuel line on her but to no avail. So I checked the carb to see maybe it was loose, but it was not. Why! Why! does this happen. HELP
Posted on: 2/7/2010 1:20 PM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9484556
RE: Any RC plans for the weekend?
are lhs is having a swapmeet today, hopefuly i will find some good deals...then off to run my rxt at my buddies track and kick some traxxas butt!!!!
Posted on: 10/31/2009 2:25 PM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9217848
RE: air filters
i agree with chevy, go with the motor saver filter, it will give you better air flow and keep the crap out better. your lhs will have them
Posted on: 8/26/2009 2:03 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=9046886
RE: LSN Default setting on Earthquakes.
turn the lsn all the way closed, but not to tight and then turn it out about 2 1/2 turns. this should get you running. also, check out the redcat racing support some very good information there
Posted on: 8/11/2009 3:59 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=9008132
RE: Redcat dealers
i think 71prostreet is a dealer for redcat in long island...urc hobby...you might want to check him out
Posted on: 8/6/2009 12:03 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8994862
RE: HPI g3.0 .18 engine in Volcano?
i am not sure, but would something like this work http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXM721&P=SM it threads onto the crank
Posted on: 8/3/2009 2:07 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8986472
RE: noob starter box ???
if you take the spacers out you won't be able to use your pull start...it will hit the bottom plate...you will have to cut out the hole for the fly wheel a little larger, no biggie though....so the starter box wheel will fit the fly wheel hole.... also, i put a sortswerk .26 back plate on mine, fits perfect... eliminates the owb also
Posted on: 8/1/2009 7:00 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8982063
RE: redcat volcano upgrades
i replaced my dog bones with these http://www.redcatracing.com/s.nl no more problems
Posted on: 7/20/2009 2:11 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8949118
RE: Hurricane XTR Owners?
you can also try using rtv or you can use this http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHWN9&P=7 or your lhs...this one will secure your anteena for sure. i mounted mine on top of the box, works wonderful....as for those wheel nuts, i used a pair of needle nose pliers to remove them. and when you do, throw them away and get some 17mm hex nuts, also avaiable at your lhs
Posted on: 7/12/2009 4:34 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8926887
RE: First run of two new Tornado BB's! Help!
as for the idle, check your trim on your remote...or might have to adjust your servo horn...take off your air filter and adjust to a opening of about 1 mm
Posted on: 6/12/2009 11:23 AM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8846685
RE: Help with my pullstart/recoil.
it is a pain in the butt, after a couple tries it does get easier. try this link http://www.hpieurope.com/pdfs/rebuild_pullstarter.pdf
Posted on: 6/9/2009 6:09 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8839263
RE: Advalanch 12 tooth clutch bell
here you go bro http://www.redcatracing.com/RC-Cars/8300812t
Posted on: 6/7/2009 3:17 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8832978
RE: Fuel Filter Recommendations?
i use a motor saver air filter in all my rc's....you can find them at most lhs
Posted on: 5/22/2009 4:29 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8790619
RE: Home weather......some depressing pics
its been in the low 100's the last couple of days here, but its a dry heat...LOL
Posted on: 5/8/2009 11:39 AM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8751360
RE: Offroad lubes
i just received a e-mail from sc johnson, the maker of pledge, they have informed me that pledge clean&shine is solvent base. i have always used wd40, but i think i will give it a try. i always remove my electronics before i clean my rc's. better safe than sorry.
Posted on: 3/17/2009 4:22 PM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8587960
RE: Offroad lubes
i was at the nitro pit a couple of weeks ago, to see the offroad challenge. most of the pro's believe it or not, were using "pledge clean and shine" in the orange can. the pit guys say that it works better than wd40. I have not tried it yet so i don't know.
Posted on: 3/16/2009 1:29 PM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8583814
RE: Redcat Monsoon Thread
bro, you have to get one...i have had mine for two years now and love it.. it is a very tough truggy except for one part?...read through the monsoon thread, there is some very good information in it. Do some of the mods and you will have a awesome truggy...you won't be disappointed!!!!
Posted on: 3/11/2009 10:37 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8568891
RE: Redcats Monsoon Thread
i put a pair of kyosho st-r on mine...only two of the three holes match up, no biggie.... just drill another hole in the chassie. they fit perfect
Posted on: 3/11/2009 9:19 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8568595
RE: Redcat Racing Volcano Thread
check this guy out. http://allaboutfunhobbies.com. I believe he is in texas, very good guy to deal with
Posted on: 3/4/2009 2:51 PM by Author "madmarty"
in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8543538
RE: ***OFFICIAL*** RXB-1 THREAD
i know for sure that the sportswerk 26 is a direct fit...i put one on my sh 28 and bought a bump box...i don't race so i went back to my drill start...something else to carry and another battery to charge...
Posted on: 1/25/2009 8:21 PM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8400855
RE: ***OFFICIAL*** RXB-1 THREAD
man, that machine looks bad...i like that pipe, looks a lot like my jp-3 and i have heard nothing but good about that sh 21 8 port...can't wait to see a video.
Posted on: 1/24/2009 12:40 PM by Author "madmarty"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8395339
| 
