|
RE: new king motor baja!!
A pullstarter outerware cover is also a preventive measure.
Posted on: 7/27/2012 5:17 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11171701
RE: Very slow KM Baja
When I bought my KM Baja, it was very slow with the stock pipe on it. I put on a Dominator pipe and now its very fast. Hope that helps. :>)
Posted on: 7/25/2012 5:54 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11169307
RE: km stalls
I tried it with new radio gear and it still was the same. So I tried a throttle servo and it did not do it. It worked as normal. I know I cannnot use a throttle servo, so my next question is, why are there three leads on the steering servo?
Posted on: 5/3/2012 1:27 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11067120
RE: km stalls
I am using a flysky radio. I am going to get a new 3 channel setup to try.
Posted on: 5/3/2012 11:25 AM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11066985
RE: km stalls
Ok, runs good but I am having a problem with the steering servo. The original one that came with the car started to shake back and forth so I replaced it. The one I bought came from China and worked for about 4 runs but now its doing the same thing. I replaced the battey with a battery holder running 4 new AA batt. and that ran for 10 min before it started to act up again. Is the servo bad? Should I replace it with an HPI one? Oh, and I switched out the receiver and its still doing it so its not the receiver.
Posted on: 5/2/2012 3:45 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11065910
RE: km stalls
Well, its running great now with the manifold and carb, new orange gas cap on the way. It was still doggy with the needles at 2 on high and 1 1/2 on low, so I decided to lean it out more, thinking that I might ruin the engine but after I leaned it out it started to get crazy fast and idles fine now. Thanks for all the help guys.
Posted on: 4/29/2012 5:13 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11061700
RE: km stalls
Thanks for the advice willclark. I will try that if I still have a problem after I replace the carb, which brings me to a question. How does the little black connector that is connected to the carb come off? Its the one that pulls the throttle in and out.
Posted on: 4/25/2012 11:38 AM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11056361
RE: km stalls
I changed the manifold and the condition worsened, so I adjusted the needles and still the same (it would start and then die). Then I noticed that the primer bulb was not filling with gas, so its a walbro carb next. Although I do not regret getting the new manifold because when I first started it up and started to run it, i noticed a difference in pep.
Posted on: 4/22/2012 12:44 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11052412
RE: km stalls
I sprayed some starting fluid on the carb manifold and the engine cut out. The manifold is plastic so i am gooing to replace it with a metal one. Also going to get rid of that crappy air filter.
Posted on: 4/17/2012 11:48 AM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11045909
RE: km stalls
is the manifold in between the carb and the head? and yes it was bought new used about 2 weeks time over a 3 month span. I will try to tune it since i have not since i broke it in.
Posted on: 4/16/2012 3:17 AM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11043815
km stalls
I have a km baja and it ran fine for a while but now it will just die out after about 2 min of run time. I changed the spark plug but it is still dieing out. Its the 30.5 engine.
Posted on: 4/14/2012 7:45 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11042168
RE: My experience (so far) with the King Motor Baja 5b.
Ok, So I put on the Dominator V2 and now I am impressed with the Baja!
Posted on: 10/27/2011 11:16 AM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10785213
RE: My experience (so far) with the King Motor Baja 5b.
Sessholvlaru, Do you know of any rear shocks that are decent but wont break the bank?
Posted on: 10/26/2011 3:15 AM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10783033
RE: My experience (so far) with the King Motor Baja 5b.
That's good to know for mine. I am down right now because the rear wheel nut came off. The pull start broke but I fixed that. It's still slow so I hope the Dominator pipe will help (I haven't got it yet).
Posted on: 10/25/2011 3:24 AM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10781361
RE: My experience (so far) with the King Motor Baja 5b.
I like your stand. lol
Posted on: 10/18/2011 3:19 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10771878
RE: My experience (so far) with the King Motor Baja 5b.
I have a DDM dominator v2 pipe on the way. Is that a dominator pipe. Did the pipe make a difference?
Posted on: 10/18/2011 2:26 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10771770
RE: My experience (so far) with the King Motor Baja 5b.
My baja is slow-no balls at all. Its suppose to be the 30.5 engine but it came as a ksrc 001 in the box, but the engine had 30.5 stickers on it. I am wondering if the seller changed the stickers to a 30.5 on a 23cc motor. is this possible?
Posted on: 10/18/2011 1:07 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10771615
RE: My experience (so far) with the King Motor Baja 5b.
When I hit the brake the buggy stalls. Is there a way to adjust the linkage so the throttle will not close backward too far?
Posted on: 10/13/2011 5:06 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10763960
RE: My experience (so far) with the King Motor Baja 5b.
So far I have to replace the pull starter and I haven't even used it yet.
Posted on: 10/10/2011 5:09 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10758733
RE: My experience (so far) with the King Motor Baja 5b.
The small gear and the large gear on the right side of the buggy is what I am concerned about. When I roll the buggy it makes a clicking noise and is not easily rolled. I checked the brake and it looks ok.
Posted on: 10/7/2011 1:20 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10753482
RE: My experience (so far) with the King Motor Baja 5b.
Also I think the clutch gear is too tight with the other gear How can it be adjusted?
Posted on: 10/7/2011 12:36 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10753396
RE: My experience (so far) with the King Motor Baja 5b.
I'm not really sure where to put this question (which thread), but i have a few questions. One is, which needle is the high speed and which is the low. Also when I give it gas it takes almost full throttle to get the tires to move and then it goes. I have only bench tested it so far. Thanks
Posted on: 10/7/2011 10:32 AM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10753231
RE: My experience (so far) with the King Motor Baja 5b.
I just bought the ksrc 002 from ebay and it should (better) be here tommorow. I ordered the outerwears filter for the pull start side of the engine and a killer bee kill switch. Anything else I should get?
Posted on: 10/5/2011 12:34 PM by Author "madmax93"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10750070
RE: HK Small Bolt Hydro same as HOTR
The small bolt is $98 on HK website but its on backorder [:@]
Posted on: 5/10/2011 4:52 PM by Author "madmax93"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=10512666
RE: HK Small Bolt Hydro same as HOTR
The snow has melted, the lake has thawed, its time to run the bolt!![:D]
Posted on: 3/14/2011 11:53 AM by Author "madmax93"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=10399290
RE: Show Off Your Ride!!!
I got this last year.
Posted on: 3/4/2011 1:39 PM by Author "madmax93"
in the forum "Off Topic Forum - Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10379003
RE: HK Small Bolt Hydro same as HOTR
As far as the gliching goes, have you tried it on dry land, walk away to see if it does it and how far you can get before it does. I had the same problem and it turned out to be the radio and receiver.
Posted on: 3/2/2011 1:48 PM by Author "madmax93"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=10374864
RE: Tower Hobbies Nitro TOWER Terror MT .25 RTR
I have one that I took the Diff off so the rear is in pieces. I have the diff but I took out the gears. It does not have the original rear shocks and it would not come with the servos, receiver or remote. And obviously it will not come with an engine unles you want to buy the HPI .28 I have that was on it for $50.00. The truck is dirty and the engine is as well. Thats all I can remember about the truck but if interested I will let the truck alone go for $20.00 plus shipping.
Posted on: 1/21/2011 4:47 AM by Author "madmax93"
in the forum "RC Monster Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10277752
pitch on pinion
I have a dynamite truck and I need a pinion gear, but I dont know what pitch it is. Anybody know?
Posted on: 12/22/2010 3:08 PM by Author "madmax93"
in the forum "Exceed RC Support - Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10212441
RE: HK Small Bolt Hydro same as HOTR
I'm still running but just on the weekend. Also I have no incidents to report.
Posted on: 10/23/2010 7:00 PM by Author "madmax93"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=10089157
| 
