|
RE: What do you think about JETLEGEND L39?
I used a scale L39 cockpit tub so I have the original spare. Not sure if it fits the new one though.I'll do some pics tomorrow, getting late over here, bedtime! Yes its JetLegend.
Posted on: 5/23/2013 4:43 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11520686
RE: What do you think about JETLEGEND L39?
I've got a tub from my L39 if it will fit yours.
Posted on: 5/23/2013 3:32 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11520624
RE: Red and yellow flashing leds on i/o board
May be worth trying another phone cable.
Posted on: 5/23/2013 12:58 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11520485
RE: F-5/F-20 Skymaster x Feibao x Jetleng
Just what I was thinking.
Posted on: 5/20/2013 7:55 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11517057
RE: JET LEGEND VIPER BUILD THREAD
Cool William. I'm on 55 flights now, how many have you clocked up or don't you log them? Gary.
Posted on: 5/19/2013 11:00 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11516123
RE: DEDICATED JET FOR P20,WHEN
2.4 metre span Chris, wadya want, a glider lol?
Posted on: 5/18/2013 2:07 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11515341
RE: National 747 crash
Apparently not, but I am well aware of it when flying! This is what happens Alasdair, this idiot attempted a loop with the gear down-WRONG!!!! http://www.youtube.com/watch?v=c4Yl8jUut2k
Posted on: 5/18/2013 3:10 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11514984
RE: National 747 crash
I've got a Jav that'll do it!
Posted on: 5/17/2013 8:47 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11514235
RE: Spektrum DX18
I suggest you use H for throttle cut, easier to find in a panic situation! Gary.
Posted on: 9/13/2012 9:43 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11227316
RE: JETPOWER 2012 products WOW !
See you Saturday mate.
Posted on: 9/13/2012 9:37 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11227311
RE: How
You can't get much lower than not bothering to put a pilot in it!
Posted on: 9/12/2012 3:31 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11226549
RE: Welsh mountains before JP2012
Brilliant as usual Loz, see you at JP! Gary.
Posted on: 9/12/2012 12:50 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11226384
RE: Alternative uses for turbine engines
I've been known to use an 80 as a weed killer in the back garden. [;)]
Posted on: 9/12/2012 12:32 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11225826
RE: Spektrum DX18
Hi Galen, Sorry about the wasting time, badly phrased that. When I got into turbines about three years ago I religously used the aux ecu as per the JC manual then èventually got a Wren and realised that I was the only one in the UK throwing a channel away. This was on a JR DSX 9 so I hà d to use a matchbox or two sometimes. When first using the DX18 I got confused because it kept throwing out the gear channel which annoyed me initially, but then I realised that gear is just a non proportional switch so the Tx just chucks it out so the early crucial channels get priority presumably for latency, common sense I guess. I quickly got used to it though. I can't quite understand how you can lose a channel though especially as one of the battery inputs is actually a 10th channel, simply plug the battery into any spare port. I started off on a Macgregor single channel reed set more years ago than I care to remember! Gary.
Posted on: 9/11/2012 12:57 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11224687
RE: Spektrum DX18
What the 18 actually does is assign the most important controls, flying surfaces, in the first available channels. Like you I used to use Aux2 for ucu control. This is a complete waste of time and a channel, I advise you to forget it. If you are worried about killing the turbine fast simply assign a throttle cut switch, I use switch H. Gary.
Posted on: 9/10/2012 12:56 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11223416
RE: Spektrum DX18
It will bind to any DSM2 or DSMX Rx and drive all channels.
Posted on: 9/4/2012 1:46 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11216618
RE: Any info on the L-39 crash? Full scale.
http://www.aero-news.net/index.cfm?do=main.textpost&id=e32f9c92-6444-4453-a9c6-e15ca00a6f26 Try this Andy.
Posted on: 9/2/2012 12:21 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11214642
RE: Byron F86
Thanks John, pm sent, Gary.
Posted on: 9/2/2012 12:13 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11214633
RE: Byron F86
I could really make good use of the decal positioning info if it's possible for you to scan and email to me? Gary.
Posted on: 9/2/2012 11:58 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11214621
RE: Lights at the top of the vertical fin. How to wire?
On composite do not use a drill larger than 1/8" otherwise it will snag on the seam joint glue and cause damage. Open up with Dremel. There are usually lightening holes in the fin ribs, use some cotton with a dremel collet for weight and dangle it through the structure, you should find a route through.
Posted on: 8/30/2012 1:06 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11211780
RE: Spektrum DX18
Bob, I just did a mix FLP>LAL 1=0% 2=0% 3=43% Switch=Flight Mode Tick Box 3 Good starting point, just adjust Point 3 until you get the required up throw on ailerons (on landing flap), Gary.
Posted on: 8/30/2012 7:08 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11211433
RE: Jetlegend T-45 Hawk
Felix, it's absolutely crucial you stiffen or pack your mains springs! Before you know it you will get into a porpoise and thump your gear through the wings, don't ask how I know!
Posted on: 8/29/2012 12:03 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11209938
RE: My New Airworld MB339
Looks the dogs nuts Mark! Good luck.
Posted on: 8/27/2012 12:45 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11207956
RE: NEIL ARMSTRONG RIP
Paul, you found footage that every human being should see, great find and thanks for posting, Gary.
Posted on: 8/27/2012 5:50 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11207397
RE: What do you think about JETLEGEND L39?
Airfighter.eu or Dreamworks. If you are talking scale bear in mind that the full size is powered by a turbofan and has NO afterburner!!
Posted on: 8/27/2012 1:35 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11207277
RE: Airbus 310 test flight
You should have expected that Seamus!
Posted on: 8/24/2012 2:05 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11204217
RE: Airbus 310 test flight
Dimensions are on the video!
Posted on: 8/23/2012 8:05 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11203329
RE: Airbus 310 test flight
Excellent, very nice flight, congratulations.
Posted on: 8/23/2012 7:57 AM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11203316
RE: Ultra Flash - Savox
1256's, they are the highest torque unless you go to 7.4 volts.
Posted on: 8/21/2012 1:45 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11201205
RE: Ultra Flash - Savox
You can't go wrong with them Alex, I'm using them on everything, Gary.
Posted on: 8/21/2012 12:37 PM by Author "madmodelman"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11201126
| 
