|
RE: ECOMRC/YT Scottish Aviation Bull Dog
Thanks for the pics and videos. I think this will be my next plane.
Posted on: 7/27/2012 10:38 PM by Author "mal75"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11171934
RE: WORLD MODELS 80.5 P-51 MUSTANG GS
It's a dragon models 12" army figure I bought on base but you can get them on ebay.
Posted on: 6/24/2012 11:16 PM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11130596
RE: WORLD MODELS 80.5 P-51 MUSTANG GS
Here are a couple of pics of my P-51 with the Top Flite cockpit kit installed.
Posted on: 6/23/2012 3:12 PM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11129032
RE: CMP 160 sized Texan
[quote]ORIGINAL: Meschmidt Mike, there is not any drop in retracts available for this plane as of now. I used a set of old Spring Airs and reangled the mount slightly. Bent some 1/4'' music wire to fit it in the wheel well. Works pretty good as a bad landing will only pull the ply layers apart. 5 minute epoxy and 30 minutes later, back in the air. Paul [/quote] Sierra giants makes a set. http://www.sierragiant.com/prod18.html
Posted on: 4/10/2012 7:03 PM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11036940
RE: CMP AT-6 Texan
Mine has plenty of support in the center section. It flies great, just a pain for me to land without it bouncing.
Posted on: 8/26/2011 6:19 AM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10687935
RE: CMP Hellcat
Thanks for the link. I'll have to pick one up from them.
Posted on: 8/17/2011 5:31 AM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10674222
RE: CMP Hellcat
[quote]ORIGINAL: charlesp I have my 2nd one on the way first one went in becouse of pilot eror boy was i sick as i walked up to it [/quote] Where did you find one for sell? I've been looking for one and can't seem to find one in stock.
Posted on: 8/16/2011 7:53 PM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10673832
RE: SYSSA 30CC GAS MADE IN USA
Looks good Rob. Can't wait to se it fly this weekend.
Posted on: 5/22/2011 7:54 PM by Author "mal75"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10535237
RE: Giant Scale Planes - CMP P-40 Mods
It won't be too bad as the engine only weighs 38 oz with muffler and ignition.
Posted on: 5/6/2011 5:37 AM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10504554
RE: Giant Scale Planes - CMP P-40 Mods
The engine I'm referring to is indeed a 35 cc gas engine. It has a beam mount that drops right in with little modification. It was originally used in my World Models 1.60 size P-51 and it was a pretty good match. Here's one with a DLE 30 . http://www.rcgroups.com/forums/showthread.php?t=1367587
Posted on: 5/6/2011 4:54 AM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10504504
RE: Giant Scale Planes - CMP P-40 Mods
I'll be puting mine together soon after I finish my GP Stearman. The plane has been sitting in my gararge for 2 years now.I'm going with a MT-35 for engine.
Posted on: 5/5/2011 11:48 AM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10503207
RE: Giant Sweet and Low stick
Very nice plane!!
Posted on: 3/20/2011 3:18 PM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10412172
RE: Giant Sweet and Low stick
I have one with a CRRC Pro 50 cc on it. It's one of my favorite planes.
Posted on: 3/20/2011 2:41 PM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10412088
RE: GP Waco?
[quote]ORIGINAL: oppie I'm using a DLE 30 with side carb. The instructions call for using 13 spacers and with the standoffs that came with the motor you need a 10-32 x 4'' socket head bolts. I would like to know where to get this bolt. I have checked all the usual hardware retailers and no luck. I then did a Google search and came up with nothing. Have any of you guys gotten this far with a side carb engine? ''Test fit the engine with the spacers and standoffs using four 10-32 x 4'' [102mm] bolts and four #10 lock washers (not supplied).'' [/quote] Check the bolt depot, they have what you need. http://www.boltdepot.com/product.aspx?cc=13&cs=71&cm=6&cd=1211
Posted on: 3/18/2011 4:48 AM by Author "mal75"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10407423
RE: CMP AT-6 Texan
[quote]ORIGINAL: av8ter Hey I am currently building one of these. What type of gear did you use? I am having problems finding retracts. Larry [/quote] Sierra makes the best gear for this plane.
Posted on: 3/14/2011 9:14 PM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10400636
RE: NEW DLE30!
[quote]ORIGINAL: bkyrdflyer Thanks, Yours is the one I saw on the other thread I think. One other question. The user manual that came with my dle30 is pretty lame and includes nothing about setting the ignition up or breakin. Someone who has no expierience with a gas engine would be kind of lost. Anyone else feel this way? [/quote] Checkout the manual from tower. It's a bit more detailed. http://manuals.hobbico.com/dle/dleg0030-0031-manual.pdf
Posted on: 2/21/2011 9:08 AM by Author "mal75"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10352714
RE: CMP 160 sized Texan
[quote]ORIGINAL: Meschmidt mal75, how much additional nose weight did it take to balance with the 26cc engine? Paul [/quote] I had to add about 13 oz of lead.
Posted on: 2/19/2011 8:19 AM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10347753
RE: CMP 160 sized Texan
[quote]ORIGINAL: vallawyer I have had one of these sitting in the box for years. I don't want to read teh whole thread, but can you tell me will a G26 fly it? The plane seems haevy. What mods are needed for the wings? [/quote] A G26 will fly it just fine. I fly mine with a CRRC Pro GF26 and it flys pretty good. As for as mods to the wings, I built it stock and I haven't had any problems.
Posted on: 2/18/2011 8:15 PM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10346988
RE: World Models GS Mustang help
I have this same model and B is correct.
Posted on: 11/10/2010 10:19 AM by Author "mal75"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10126473
RE: CMPro Piper J-3 Cub 120 91
I've been working on mine off and on for about 2 weeks now. I used 48" Dubro 2-56 pushrods for the elevators. I hope to have it finish for a maiden this weekend.
Posted on: 8/13/2010 1:02 AM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9930196
RE: Texas RC Piper PA-25 Pawnee Build
Thanks for the update . It looks like a pretty nice kit from the pics.
Posted on: 5/18/2010 12:10 AM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9741249
RE: Texas RC Piper PA-25 Pawnee Build
I've been thinking about buying this plane for some time now. I look forward to your updates on the build.
Posted on: 5/15/2010 8:57 AM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9735150
RE: CMPro Piper J-3 Cub 120 91
Nitroplanes.com has them in stock.
Posted on: 4/10/2010 11:52 PM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9652074
RE: NEW SYSSA 30CC GASSER MADE IN THE USA
[quote]ORIGINAL: ghoffman I was at Syssa's shop yesterday and he really got my engine singing! Â It did 8700 with a Vess 18-6 with a 1600 rpm idle and instant throttle response and I only have about 3/4 of a gallon on the dino oil through it! Â Now I have to get it installed with the pipe on the EF Extra. Â I am wondering how much covering I have to remove on the bottom? Â [/quote] I've been following this thread for a while now trying to decide if I want to buy this engine or not. I was just wondering if you had a problem with your engine that required Todd's expertise?
Posted on: 3/28/2010 9:46 PM by Author "mal75"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9619836
RE: Retracts for CMP AT-6 Texan
I have the Texan with Sierra gear installed. They're a little pricey but are of great quality and drop right in.
Posted on: 3/24/2010 8:33 AM by Author "mal75"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9607556
RE: CMP AT-6 Texan
I had to add about 13 oz. of lead. If I had to do it all over again I would have just installed a bigger engine.
Posted on: 3/15/2010 12:47 AM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9582843
RE: CMP AT-6 Texan
I have the CMP Texan with a CRRC Pro 26cc engine and I think it's a perfect match for the plane.
Posted on: 3/14/2010 10:37 PM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9582550
RE: MT 35 Looks Like a Winner
Thanks for the fast replys. I'll be mixing some up today and try and run it some time this weekend.
Posted on: 3/13/2010 12:32 PM by Author "mal75"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9578547
RE: MT 35 Looks Like a Winner
My 35 arrived yesterday. I'm looking forward to replacing my 180 4 stroke with this engine. Can anyone tell me what the recommended fuel mixture is for this engine? Thanks
Posted on: 3/13/2010 11:09 AM by Author "mal75"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9578334
RE: Black Horse Models -What Do You Know?
I have the .60 size T-28 and it's easily one of the best made kits I've owned.
Posted on: 2/27/2010 12:39 PM by Author "mal75"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9540212
| 
