|
RE: game
thats funny...i played it.
Posted on: 11/2/2009 9:44 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9223872
RE: MHZ Shockwave-M Thread
hey ryan...i like the video. it looks faster than when i had it. mike
Posted on: 10/30/2009 6:31 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9215983
RE: MHZ Shockwave-M Thread
hey guys just a thought but will a trim tab with the same style turn fin on the right side help this at all. or is the rudder still to long? the boat did do the same when i hade it but i think maybe less because i used neavy cells. but if you lean it over fare in the right turn it would blow the back out. ...mike
Posted on: 10/24/2009 2:32 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9198658
RE: MHZ Shockwave-M Thread
hey ryan...ran my skater today. motor temp was 405 lol. esc was very hot to. did you ever get it figured out? mike
Posted on: 10/23/2009 8:59 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9197165
RE: 1/12th miss t-plus FE hydro production?
started the mold repair today. block sanding when dry. should have it ready soon.
Posted on: 10/20/2009 7:01 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9188630
RE: 1/12th miss t-plus FE hydro production?
if you ever make a mold from ABS plug with polyester resin you better use pva after the coats of wax. if not your part will be eaten by the gelcoat and stick to the mold to no end. thats what ended up happening to my lower hull that is now junk. the only reason the other parts came out ok was i used 9 coats of wax with 3 coats of pva. this will never happen again after what this cost me. the mold may be saved if i can get the other parts out. the mold will need extensive work to be ready for parts. again....sorry
Posted on: 10/20/2009 3:41 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9181587
RE: 1/12th miss t-plus FE hydro production?
man i bet that was fun getting that hull apart. the sponson opening is 1 1/2 then it drops down the step of the sponson. blus the cockpit has lots of room for another 2 lipos stacked. thanks...mike
Posted on: 10/20/2009 3:40 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9165648
RE: MHZ Shockwave-M Thread
hey ryan...take a look at the speed control programing. remember i ran it on nimhi so everything is set to max with no lipo voltage cutoff. try that and see what happens. mike
Posted on: 10/19/2009 1:45 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9184417
RE: MHZ Shockwave-M Thread
thats weard...it never ran that hot here and the water is hot 81-85 ...mike
Posted on: 10/19/2009 1:45 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9184454
RE: 1/12th miss t-plus FE hydro production?
yeah thats what i figured it did. maybe slower when i had it. the only boat i have now is a mrp skater that im going to start running. would of hade the t-plus but[:'(] lol. will have the mold ready soon though. thanks again...mike
Posted on: 10/19/2009 1:09 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9184400
RE: 1/12th miss t-plus FE hydro production?
hey ryan...man that thing looks sweet. im really happy you like it. i bet its much better on lipos then it was on heavy nimh. any idea how fast it is now? thanks..mike
Posted on: 10/19/2009 12:35 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9184339
RE: 1/12th miss t-plus FE hydro production?
hey ryan...thanks man, its hard but may still work out. hey hows the fountain running. wish i still had that boat it was a blast to run. thanks...mike
Posted on: 10/18/2009 2:18 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9182984
RE: 1/12th miss t-plus FE hydro production?
hey guys...its looking better but now its more work for me that i really cant afford. im going to start the top deck and use the pva for sure. wish me luck lol. thanks...mike
Posted on: 10/18/2009 2:16 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9182982
RE: 1/12th miss t-plus FE hydro production?
makes me sick but ive gotten some parts out. mold like i thought needs lots of gel work. should be able to fix though things are looking a little better after 3 hours of pulling, cutting, hammering, chisleing.
Posted on: 10/18/2009 1:31 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9181922
RE: 1/8th Scale hydros at HOTMBC
sweeeeeeet! love the pics. i like the look of the old hydros.
Posted on: 10/17/2009 11:26 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9181726
RE: SHOW UR BOATS PEOPLE
my boats....
Posted on: 10/15/2009 11:34 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9176972
RE: 1/12th miss t-plus FE hydro production?
your exactly right....now i just need to get the thing done lol. will see what turnsout when the lower hull is pulled from the mold. thanks...mike
Posted on: 10/15/2009 4:18 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9175919
RE: 1/12th miss t-plus FE hydro production?
i will just use clay to fill it in just in case somebody wonts it like the t-plus was setup with the factory cg and all. thanks again...mike
Posted on: 10/15/2009 12:33 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9174432
RE: 1/12th miss t-plus FE hydro production?
good idea eboat. thanks...mike
Posted on: 10/15/2009 12:20 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9174406
RE: 1/12th miss t-plus FE hydro production?
got the hull layed up late last night in to the morning. the hardest parts is the double wing boxes in the rear section of the hull. i should have made theme solid for the plug but didnt wont to hurt the abs hull. oh well if it doesnt come out right i will just make a new one. thanks...
Posted on: 10/14/2009 7:27 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9173653
RE: Show Off Your Ride!!!
my old junk lol....
Posted on: 10/12/2009 5:41 PM by Author "maverick pro"
in the forum "Off Topic Forum - Boats"
http://www.rcuniverse.com/forum/fb.asp?m=9167464
RE: 1/12th miss t-plus FE hydro production?
ok pulled the parts out the mold tonight. now need to wet sand the mold for actual fiberglass parts to be pulled. on to the hull now....
Posted on: 10/12/2009 12:13 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9165550
RE: 1/12th miss t-plus FE hydro production?
hey eboat...31 inch long x 14 inch wide. thanks...mike
Posted on: 10/11/2009 2:45 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9164067
RE: 1/12th miss t-plus FE hydro production?
i dont miss doing this at all lol fin set and cowl layup.
Posted on: 10/11/2009 2:54 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9163112
RE: diy cheap boat mold? help
check my thread out called 1/12th t-plus hydroplane. im doing it now and just started the waxing. thanks...mikw
Posted on: 10/9/2009 2:14 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9158431
RE: 1/12th miss t-plus FE hydro production?
started the waxing on the cowl and rear fins. next the hull and deck. soon will start the pva then gelcoat and first layer of glass. thanks...mike
Posted on: 10/9/2009 2:12 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9158428
RE: 1/12th miss t-plus FE hydro production?
hey chief...thanks, its something i always wanted to do but never had the chance to. now with no job i have all the time in the world to do it till i find a job. if it does work out i would love to keep doing it and make other hulls to. nitro version mite be tuff....but it can be done. im going to shoot for 80 to 120 dollers a hull. but i still have no idea waht it would cost to make one after i get the mold done. it may be less or more than that. just wanted to test the water and see if it was worth it. thanks again....mike
Posted on: 10/1/2009 12:10 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9137658
RE: MHzUSA
i cant get there website to come up at all. hope they are still in business. mike
Posted on: 9/30/2009 9:11 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9137163
1/12th miss t-plus FE hydro production?
hey guys...im going to start makeing the miss t-pluss FE unlimited hydro. would there be any wont for this style hull to make productions of? its the same hull as the dpi 31 inch t-plus but built in fiberglass or carbon, polyester or epoxy. cost of a hull only done in gelcoat will be added when i make the first hull and see what cost will be to make it. i mite even do a painted version so all the owner would have to do is ad the provided decals to dress it up. let me know what you guys think.
Posted on: 9/30/2009 9:07 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9137152
RE: 42
im no expert but it looks to me the kv rating is a little low. maybe someone with more experiance will chime in. i would run this motor in that hull feigao 540XL. i have the same in my fountain. mike
Posted on: 9/20/2009 1:52 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9109925
| 
