RE: A123 4600 6.6v
Also for your info here is the new distributor for A123 battery's and this is apperantly why my emails ect did not work. http://enerland.com/ Thank you for your purchase of A123 Racing battery. Enerland, a subsidiary company took over the A123Racing business and now have global distribution and customer support now through direct email or local distributors. To provide proper service for your warrantee claim, please inform us when/where/what/from whom you purchased A123 battery. Please pay attention that we can support you only when you purchased A123 products through authorized sellers or distributors. Thanks, Jason Choi Customer Support ENERLAND Co., Ltd. a division of A123Systems P +82 31-639-2803 | C +82-10-9097-5600 | F +82 31-639-2833 Skype id : jasonchoi_enerland Skype call : US-707-206-7477
Posted on: 3/16/2009 9:40 PM by Author "max1998" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=8585474

RE: A123 4600 6.6v
Hello Guys I may have the problem solved as long as the packs perform OK.I hooked up the 2.11v pack(6.6v) to my Older LRP Quantum charger and hit it with 8 amps .This is a Nim and Nicad charger only but does not care about a low voltage.I only charge until the voltage came up slightly over 6v and had put just under 200mah into it.Then I stuck it onto the Lith Ion profile charger,away it went charging fine so far. So Zeta30 I did not get around to the Zip charging but I found a quick way to get it all going .Thanks
Posted on: 3/16/2009 9:39 PM by Author "max1998" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=8585550

RE: A123 4600 6.6v
?? Don't understand charge them at 3.6 Volts. These cells are to be charged to 3.6 VDC per cell, making your 2S2P charge voltage to be 7.2 VDC. If you are charging both series cells at 3.6 VDC, your charger will indead shut down real quick. Nominal voltage of two series A123 cells will be around 6.6 VDC, if they have been off of the charger for a few weeks or so. Yes but when you only have 2.1volts in your 6.6v pack you charger will not let you charge.It will tell you voltage to low.So I put it on 1s to try and bring the voltage up some.How else do you think I should try and get it up.I do understand that the pack is 6.6v but if it won't charge tell me what else to try.I was just trying things.
Posted on: 3/16/2009 9:18 PM by Author "max1998" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=8585453

RE: A123 4600 6.6v
I am sorry if I am wrong but you are saying to try and charge just the low cells and I do not understand how you would do that without cutting open the packs? Thanks ad I will look at zip charging.Dennis
Posted on: 3/16/2009 7:51 PM by Author "max1998" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=8585078

RE: A123 4600 6.6v
These are a premade Hypersonic packs, 2s2p 4600.I do not want to cut into them or anything like that until I can make some contact with someone about warranty.I did charge them at 1s 3.6v and it went up in vlts but only took 3mah and then the charger shut down saying charge complete.It was down to 2.11v in a minute or so.This is total pack voltage and not 1 cell. And as for a bad taste ,It is more a Ebay store bad taste as I am still awaiting reply and hopfully another (good) pack from this online store(shorted me 1 pack).I am really tired of our sell ,but do not backing anything up system.I have been running TrakPower lipo's and the one thing that was great is they told the hobby store that they could warranty any problems with packs.I never had to use this but it is comforting.And yes I have no idea why I am trying something different since the TrakPowers have worked well for me for almost 2 years.Thanks
Posted on: 3/16/2009 5:53 PM by Author "max1998" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=8584644

RE: A123 4600 6.6v
Well I did not want to say much on here but I bought 6 new 6.6v packs and three of them are in the 3 and 2volt range.I cannot get them to come up.In there directions it states if voltage is lower than 3volt per cell to contact them at customersupport@A123racing.com but this does not work and neither does there web site.I tried starting a charge on the one pack and setting it for 1s.It took 3 amp and says it was charged?There are some cell issues.The three other packs are all fine.This is my first time with A123 .I have only ran Lipoly ,Nicad and Nimh cells .I have never had any problems with batteriel over a 30 plus year period until these.
Posted on: 3/16/2009 2:11 PM by Author "max1998" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=8583932

A123 4600 6.6v
Hello I just bought 6 new packs and am having problems with a few packs.I need to contact A123 racing .The email address does not work and the web site is down? Need help getting in contact with A123 Racing. Is there a phone number? Thanks [8|]
Posted on: 3/16/2009 10:58 AM by Author "max1998" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=8583297

RE: Vanessa c.g. Rig: How to.
A buddy of mine uses this system on his 40% scale Edge 540 ect.He has a cordera belting rather than string, but much the same otherwise.
Posted on: 3/8/2007 7:56 PM by Author "max1998" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=5532042

RE: Seidel 5 cyl radial parts?
I did some searching ect but how do I the Ziroli web site or contact info ect.Thanks Don't worry I have sice found his site and will contact him to see if the parts can be brought in through him.Thanks Dennis
Posted on: 10/1/2006 3:44 PM by Author "max1998" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4814984

RE: Seidel 5 cyl radial parts?
I must say no to reading German and I had found that site before and was hoping that there was a NorthAmerican dealer .The motor was originally bought from Proctor Ent.I did some digging around on Seidel site there and it appears that allot of it is not working but I did send a email.I hope that they can read English.I guess I while find out .Thanks to you all for help. Dennis
Posted on: 10/1/2006 2:03 PM by Author "max1998" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4814735

Seidel 5 cyl radial parts?
Hello I would like to know if there is anyone in the US or anywhere for that matter handling the Seidel line of engines .I need some parts for a 5 cylinder .Any help would be greatly appreciated.Thanks
Posted on: 9/29/2006 11:46 AM by Author "max1998" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4807421

RE: Firehammer Charger
It states that it is a 7.2volt 600MAH charger so it is going to just charge at that rate constant.You while have to unplug it after charging or it while overcharge.
Posted on: 7/30/2006 11:10 PM by Author "max1998" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=4564651

RE: 1/2A club racer (Looking for one)
Hello Remby that is about what we are thinking.We are starting of with a single design plane,the Ace 400.We can scratch build it or kit build it but it must maintain the true outside shape and dimensions.Airfoil must be unaltered.As for engines we are letting any cox up to the TD051 and any Norvel BigMig 049-061 so you know what most will be flying in short order!I was also thinking the same on the fuel 25% nitro cap.We want to start of simple so no one has a huge advantage ect.Close racing is fun.Winning or losing by a mile always gets old fast.I would think before the year is over we will have a 1/2A outlaw class starting.Should be fun.Thanks for the info and any more that is coming.[8D]
Posted on: 9/23/2004 12:06 AM by Author "max1998" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2195704

RE: 1/2A club racer (Looking for one)
Thanks for all the info so far.The decison will be tough.Any help on rules and course set up would be great Dale.Thanks Dennis
Posted on: 9/21/2004 10:30 AM by Author "max1998" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2190817

1/2A club racer (Looking for one)
Hello are club is looking for a fun basic 1/2A club racer.We have decided on a .061 engine limit.Cox TD and Norvel Big migs are the chosen engines.We have been leaning towards the Ace 400 kit as it is simple and could be easily scratch built ect.We have no pylon racing experience but lots of good pilots and builders.Does anyone know of a better plane or a true club racer?Thanks for any help.Dennis
Posted on: 9/20/2004 5:57 PM by Author "max1998" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2189065

RE: Aeroglass website?
Hello I believe that Aeroglass does not have a web site ,but this is there phone # 519-875-1533 .Great hobbies has some of there products on there web site but it is not all of them.Hope this helps .Dennis
Posted on: 9/20/2004 3:40 PM by Author "max1998" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=2188650

RE: Crashed my ntc3...at 57mph
Hello Kwong sorry about the crash .I was wondering what the air filter system you have on the motor is?Make and where I can get one from.thanks a new NTC3 owner
Posted on: 2/25/2004 12:16 AM by Author "max1998" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1562223

RE: good prop after evo trainer?
For something like the LT 40 I would go with less pitch and keep the diameter up.You well have better thrust and lets face it a LT40 is not designed for max speed.Try a 11x5 APC or a 11.5x 5 Bolly clubman.It well still be fast but it well also jump into the air on takeoff and vertical way better.Vertical performance well far exceed a 10-6 or 10-7.Just my 2 cents.Dennis
Posted on: 11/7/2003 9:24 PM by Author "max1998" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=1260394

Plans
RCM has plans for a real nice 46 size extra 230.I built one tears ago and now a buddy is doing one up.Excellent flyer hands of knife edge.Dennis
Posted on: 8/5/2003 2:14 AM by Author "max1998" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=1018858

Easy Built kits
Easy built list .Kits For Sale Wasp 60" FFP-2 Wasp 45" 1/2A FFP-4 Pilatus Porter 53" Electric R/C ERC-16 Hornet 48" FFP-1 SE-5 50" FF-59 Tomahawk 50" FF-56 Mitchell Bomber 38" D-4 Taylor Craft 50"FF-52 Moffett 40" FF-82 Lancaster Bomber 38" D-3 Hurricane 50" FF-57 Fair Child Ranger 50" FF-54 Spitfire 50" FF-55 Projects 1-2-3 FF Freshman 18" FF86 Little Richard 12" FF85 Miss Canada Sr 36" FF-11 Baby Hornet 30" FF-31 Lenfant 13" FF84 Hudson 30" D-2 Mosquito 25" D-1 Imp 15" FF-83 That is the Easy Built list.Tell me the ones you are interested in and I well give a package deal Thanks Dennis
Posted on: 8/4/2003 4:07 AM by Author "max1998" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=1021454

Plans
I have a set of plans new in the tube for a Sukoi SU26 I beleive.This is a fairly easy to build plane a friend of mine built on.It is a 120 size plane.The plans are through RCM.Email me if interested .They come with direction sheet also.
Posted on: 8/3/2003 9:40 PM by Author "max1998" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=1018853

Old timer kits
Yes these are all up for sale.Make resonable market value offers and any of them could be yours.Thanks Dennis
Posted on: 8/2/2003 7:23 PM by Author "max1998" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=1016521

OLD Timer FF and rubber power and Some R/C assist kits
Subject: Free flight and rubber power list .R/C asist FOR SALE Make resonable market value offers.Thanks This is a list of some of my FF,R/C asist and rubber power kits.All boxs are exccellent to good. 23x Easy Built kits Email request (Lazy) 2x peck poly one nighter 16 1xPP R.O.G 1xPP skybunny 18 1xPP praire bird 50" R/C 1x PP covertable old timer rubber 34" 1x PP one night 28" 1x PP Praire Bird 16" 1x PP Moth 24" old time rubber 1xPP Bostonian Pup 16" 2x Model Aviation Labritories MAL The Gnat 12" FF 010-020 3x MAL The May Fly 12 3/4" Electric or CO2 1x Seaglen Models Pacific Ace 30" 1x Schlueter Free Flight Models Pacific Ace 30" 2x Cal Aero Models Brooklyn Dodger B-2 1x Midwest Sniffer26.5" 010-060 1x Korda 3/4 scale 1938 Wakfeild classic Rubber 1x Vernon Deacon 52"(SOLD) 1x Veco Dakota 24' F1 1x R/N models Brooklyn Dodger 23 1/4" 020 1x R/N modelsplayboy Sr cabin 36" 020-elec 1x Ambroid Charger48" up to 15 1x MAL Trainaire 19-35 R/C 1x MAL Bounty Hunter 250 1/2A FF 1x MAL Dragon Fly 24" 010-020 1x MAL Baby Zepher 24"Pee wee 020-K&B infint 020 1x Campbells Custom Kits Fubar 36" early 1/2A or 020 1x R/N models Two Step rubber 1x Sterling Ford Tri Motor 34" 1x Guillows Trixter Beam 1x Guillows Dehavilland 4 1x guillows Cessna 172 1x Wipa Models(Czech republic)Auster ARF 1x comet Cessna 150 29" 1/2A U/C 020 FF 1x Comet taylor Craft 54" rubber 1x comet Sparky 32" rubber 1x Keil Kraft senator 32" rubber 1x Keil Kraft competitor 32" 1x Keil Kraft Swallow rubber 1x 1/2A Zeek replica kit 1x Anderson Pylon 1/2A R/C Texaco 1x Classic air models co Playboy SR 1/2A Texaco 1x M.E.N. Buzzard Bombshell 1x Famous Flying Models Dart 24" Rubber 1x hacker DHC-2 Beaver 26" Rubber Co2- micro R/C 2x Midway model Comp 70% bombshell 50" R/C FF 1x Campbell Custom Kits Mini Pearl 1/2A 1x Leisure Lanzo Bomber 70" o5 electric 1x 1936 flying Quaker 1x 7ft Power House FF 1x Sig Tiger 21.5" Rubber 1x Graupner PA18 Super Cub 540mm 1x Testors F86 saber Jet 1/2" scale 1x Campbels custom kits Golly Wock 1x R/N Stratometer 36" old time class C 1x copetition models starduster 900 short kit 1x Jasco Phoenix skipper 1x sig cabin air 22" 1x sig mini maxer 23" 1x Jetco models superflite 36" tow line glider 1x Berkly amazon 400 62" 14-23 1x Berkly Pay Dirt 36 or 48"020 1x Jasco Super Flash class AB .199-.24 1x midway models 1942 modelcraft commando 049-10 1x Veco apache 52" 049-051 AS SAID BEFORE EMAIL FOR PHOTOS AND FEEL FREE TO ASK QUESTIONS.PASS ON THE LIST TO ANYONE THAT YOU THINK WOULD BE INTERSTED.THANKS DennisPedersen [email]deltadennis@telus.net[/email]
Posted on: 8/2/2003 5:05 PM by Author "max1998" in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=1016519

US Engines - Any Info Appreciated
[QUOTE][i]Originally posted by RCIGN1 [/i] [B]US engines are good, but somewhere along the line they bought a bunch of cheap flywheels and bad hubs that were crooked.. How do you know which flywheel is which.I have seen US41s with more fins on the flywheel than mine?Do you know how to distingush one from the other .Thanks Dennis
Posted on: 4/6/2003 1:14 AM by Author "max1998" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=669415

PA18
I found a great site for Super Cubs and Cubs ect.Seven hundred and sixty seven pictures of Super Cub photos and a complete other Cub section ,interior exterior gear wheels everything.Lots of Bush planes with bush tires floats and skis. [url]http://www.supercub.org/schome.php[/url] It is a great site
Posted on: 1/7/2003 1:45 AM by Author "max1998" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=463897

1200 sq
I sure see no problem with 12 pounds and 1200 sq.It should be a floater.My Giles is 960 sq and 12 pounds and is fine although it is not a bipe but that still sounds fine to me?
Posted on: 1/6/2003 6:10 AM by Author "max1998" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=461627

Piper PA18
Hello guys I am looking for scale photos of Piper PA18 s.I am really wanting some good interior shots of dash and seats ect.I have a 1/4 scale kit that I want to do a full scale interior in .Thanks for any help with photos and web address info.Thanks Dennis
Posted on: 1/6/2003 6:00 AM by Author "max1998" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=463895

New Format
I agree I like this new set up and a 2 thumbs up guys .I am not an ARF fan and get tired of weeding them out .Thanks and the best in the New Year and God Bless .Dennis
Posted on: 1/1/2003 4:42 PM by Author "max1998" in the forum "Suggestions"
http://www.rcuniverse.com/forum/fb.asp?m=452015

Legacy Lite
I have a Legacy Lite NIB .If you want it email me.Thanks Dennis
Posted on: 12/11/2002 5:13 AM by Author "max1998" in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=404674

Radio service
I send my transmitters in on a yearly rotation. One each year with servos that are out of planes and receivers.My servos mostly 4721s get somthing change in about 25% of them when they go in.I have never had a failure so I think it is good insurance.
Posted on: 10/20/2002 5:17 AM by Author "max1998" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=323018