RE: dNaNo Racing
i wanna see one w/o the lid
Posted on: 7/28/2010 5:21 PM by Author "maxxin2.5" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9894775

RE: t-maxx 3.3 tranny in .15 pro
im still confused about what hex brake system.
Posted on: 7/27/2010 4:13 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9892186

RE: problems
i always thought first tank was idling it the whole time?
Posted on: 7/27/2010 1:36 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9891858

RE: XXXOFFICIAL OFNA CRT.5 THREADXXX
still have yet to give the os .18 a try. i need a new glow ploug for it and im to lazy to get one. how is everyones crt's? i plan to get a better engine for this car. i think im going to get the rtr version because it still has the extended chassis (right?) i am trying to decide a motor that is gonna be faster then stock but still cheap. any ideas?
Posted on: 7/26/2010 11:44 AM by Author "maxxin2.5" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9889122

RE: dynamite mach 2 .19t engine?
yea i will do some reading and what not.
Posted on: 7/23/2010 1:31 AM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9882606

RE: dynamite mach 2 .19t engine?
i can try. at the moment i think i could only afford the 3.3 engine and some other things that i need for my truck. but eventually im sure i will get a better pipe and retune it for performance. i was reading some reviews and they said the trx 3.3 only lasted about 2 gallons. and another one saying its not good if you drive everyday because they wear out fast?
Posted on: 7/22/2010 11:23 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9882419

RE: dynamite mach 2 .19t engine?
thank you. i will most likely go with the 3.3 to anyone else. will the stock traxxas plastic tuned pipe restrict flow and effect performance?
Posted on: 7/22/2010 11:01 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9882361

RE: dynamite mach 2 .19t engine?
[quote]ORIGINAL: Quickywd01 So you have a original t-maxx .15 pro and you switched the engine out for a 2.5? [/quote] yes i switched the engine to 2.5. ive had it for a very long time now. the compression is bad. hard to start.
Posted on: 7/22/2010 10:54 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9882341

RE: dynamite mach 2 .19t engine?
okay thank you. i do have the 3.3 spec tranny so the only thing that is going to be hurt would be the center shafts. but will the platic trx pipe restrict power to the trx 3.3?
Posted on: 7/22/2010 10:53 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9882339

RE: dynamite mach 2 .19t engine?
i prefer to keep my t-maxx to the shorter version. i was told to get the beefed up 3.3 driveshafts i have to dremel my chassis. i dont know if i want to do this. Can i use the stock .15 pro t-maxx centershafts and have them hold up to that power? also i only have the stock traxxas t-maxx plastic tuned pipe. will this pipe restrict the power for the engine?
Posted on: 7/22/2010 10:50 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9882332

RE: dynamite mach 2 .19t engine?
well i have to beef up my drivetrain dont i? i have the 3.3 driveshafts. do i need to buy 3.3 center shafts? or will the stock ones hold? if they do i will definately grab a 3.3
Posted on: 7/22/2010 10:45 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9882316

dynamite mach 2 .19t engine?
Im looking to buy a new motor for my t-maxx, i am looking to stay around $100 i noticed the dynamite mach 2 .19. any experience with it? or will i have better luck going with a 2.5r?
Posted on: 7/22/2010 10:19 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9882240

RE: t-maxx 3.3 tranny in .15 pro
http://www.amainhobbies.com/product_info.php/cPath/1_25_1466_363/products_id/19096/n/Traxxas-Forward-Only-Conversion-Kit-TMX-25R-33 is this the FOC i need? i believe it appears different fromt eh one you posted snook. and i cant find the brake system you are talking about? when i try to lookup parts they do not say 4909 or anything. they just say like 3.3. im having the hardest time with this. thanks for all the help tho.
Posted on: 7/22/2010 2:57 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9881312

RE: t-maxx 3.3 tranny in .15 pro
what will the brake do to help me with this? thanks
Posted on: 7/20/2010 10:46 AM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9876473

RE: merv custom mods
okay well hopefully you will go to the mini section because they have a thread with ove 130 pages of useful info. just saaying.
Posted on: 7/19/2010 8:07 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9875175

RE: merv custom mods
believe this should be in the mini section.
Posted on: 7/19/2010 7:48 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9875136

RE: t maxx begginer help!!!!!
okay well. also the traxxas manual has a great tuning guide.
Posted on: 7/19/2010 7:42 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9875125

RE: buying some nitro what kind!
noone is hating..
Posted on: 7/19/2010 7:39 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9875120

RE: t maxx begginer help!!!!!
i think giving the manual some attention could help. lots of great useful information. it really is a fantastic manual. for failsafes. i wouldnt go cheap on one. my truck never works anyways so i stilll dont even have one. but when i do get one i wont go cheap.
Posted on: 7/19/2010 7:35 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9875106

RE: t-maxx 3.3 tranny in .15 pro
[quote]ORIGINAL: Snook Man There are two versions of the 3.3 tranny. The early model 2.5R and short wheel base 4909 T Maxx use the smaller diameter output shaft and both come stock with reverse. The 4908/4907 3.3 extended chassis version uses the revo spec 6mm output shaft and is Forward only. The 3.3 4908 transmission you have uses the 6mm output shaft. The 2.5R and 3.3(4909) Maxx tranny uses the 5mm shaft you need to fit the center shafts you have. I believe the shaft is only availiable with the kit. The brake system from the 4909 (Blue hex system) will also make the install easier. [/quote] wouldnt i just be able to use the 2.5r 4909 center shafts? if not i would need to get the FOC you posted and the 4909 blue hex brake system?
Posted on: 7/19/2010 7:27 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9875085

RE: Traxxas E-Maxx
i think the thing to consider doing before shooting it with a gun is sending it to me (: haha
Posted on: 7/19/2010 2:52 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9874488

RE: t-maxx 3.3 tranny in .15 pro
this transmission already has the foc. well i just bought a 3.3 forward only transmission. i still have to buy that? there arent output shafts i can buy that i can use?
Posted on: 7/19/2010 2:15 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9874417

RE: t-maxx 3.3 tranny in .15 pro
okay i have my 3.3 transmission, the output shafts from my truck to not fit onto the 3.3 tranny because the shaft is to large. so i tried switching the old shafts from my .15 tranny to my 3.3 tranny but since they are not as wide they do not fit in the bearings that the 3.3 tranny uses. so i tried using the bearing from the .15 tranny but they are to small to fit in the tranny case. so all in all. my output shafts fit onto my .15 tranny not the 3.3 i cant use the shaft from my .15 tranny because the breaing hole is to large i cant use the actualy bearing in the 3.3 tranny because i will not fit the case. okay i did my best. lmk if its better and you can help.
Posted on: 7/19/2010 1:45 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9874362

RE: t-maxx 3.3 tranny in .15 pro
no help?
Posted on: 7/19/2010 12:10 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9874131

RE: XXXOFFICIAL OFNA CRT.5 THREADXXX
im going to seal up my borthers os .18 cv-rx because the damn thing gets extremely hott when i run it. might be an air leak. and if i can get that to not heatup im definately getting the pro kit.
Posted on: 7/18/2010 9:51 PM by Author "maxxin2.5" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9873028

RE: XXXOFFICIAL OFNA CRT.5 THREADXXX
i think i might go with the kit. but i am not 100% sure. i think i will do more research.
Posted on: 7/18/2010 9:30 PM by Author "maxxin2.5" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9872980

RE: nimh batteries for mini e-revo?
the first batteries are good. i had an 8 cell for my rc18t. only thing i can say, hauled ass.
Posted on: 7/18/2010 3:29 PM by Author "maxxin2.5" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9872347

t-maxx 3.3 tranny in .15 pro
okay i have a pro .15 t-maxx i converted it to 2.5 and then i recently bought the 3.3 susp arms and driveshafts. i recently bought a t-maxx 3.3 tranny and the outputs shaft do not fit. the shafts on the tranny are to large. i was told to switch the shafts between my trannys but the bearings in the .15 tranny are to small. what can i do? are there any output shafts that are direct replacement? any help appreciated
Posted on: 7/18/2010 3:16 PM by Author "maxxin2.5" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9872332

RE: OFFICIAL MINI E-REVO THREAD!!!
[quote]ORIGINAL: patrick12186 those are the traxxas championship racing Edition Response tires and rims. I think they are 1/2 off set but what really add to the wide stance are the wheel extenders. It is sitting right at 11.4 or 11.5 inch wide stance. Factory is 9.4 inches wide. [/quote] thanks. bro. good looking revo
Posted on: 7/18/2010 3:00 PM by Author "maxxin2.5" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9872308

RE: XXXOFFICIAL OFNA CRT.5 THREADXXX
i think i might get the rtr kit. what is the difference between pro and rtr?
Posted on: 7/18/2010 2:58 PM by Author "maxxin2.5" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9872304