RE: MIRAGE 2000B AND MW-44
Hello The plane was weighing 3950 grams. Transform the plane into electrical propulsion, but a breakdown of the motot in flight I end for destroying the plane. Regard
Posted on: 4/11/2011 7:32 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10455920

RE: A HAPPY
Hello A "Turbo-Happy" New "Jet-Year" to all. Hola Les deseo a todos un Felíz y muy Próspero año 2011. Manuel
Posted on: 12/31/2010 11:11 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10229952

RE: Avons F104 HELP!!!!!!!
http://www.rcscalebuilder.com/forum/forum_posts.asp?TID=9598&KW=Avonds+F-104 Regards
Posted on: 9/28/2010 4:23 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10033590

RE: Jets over Pampa 2010
¿¿¿¿ http://www.youtube.com/watch?v=GWXUP1FHufs&NR=1 ?????
Posted on: 7/28/2010 8:11 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9895149

RE: Jet for P-60
Hello It is a good German product, a kit of very high quality. But, It is the typical German Kit, no accessory and the assembly instructions are minimal. If you have sufficient time and many patience is the plane that you need. In another case, looks at the Fly Eagle Jet the Lyberty S Manuel
Posted on: 2/7/2010 12:33 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9484440

RE: U-2
Hello http://shop.strato.de/epages/61316787.sf/de_DE/?ObjectPath=/Shops/61316787/Products/%22Lockheed%20U-2A/B%22
Posted on: 1/11/2010 5:43 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9407467

RE: MIRAGE 2000B AND MW-44
Hello The box of the servo is made for the S3150. To place another servo is very difficult. I had the same problem. THE servo S3150 is a very good servo, I fly my plane without any problem with the servo. Saludos Manuel
Posted on: 11/27/2009 6:15 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9284160

RE: What kind of turbine is this? Popcorn ready,ha
It is a tradition to say in Spanish that: Seven lives it has the cat [8|][8|]
Posted on: 11/18/2009 10:55 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9262634

RE: Skymaster ARF Plus 1:5 scale F-104G
A nice project. Anton fulfills the promised. But it is out of my possibilities. The plane is bigger than my workshop. It is a very big jump from 1/7 to 1/5, the Avonds 94 inch to Skymasters 131 inch. Is it possible that in the future a smaller F-104G is constructed? How the Phantom 1:7 3/4 and 1:9.5. Regards Manuel
Posted on: 9/16/2009 11:33 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9100374

RE: MIRAGE 2000B AND MW-44
I think that the planes of this type (Delta wings) do not use flaps, only speed brakes. In the nosewheel assembly use Sullivan Skylite 1.75 wheel, They are narrower that I found. Pienso que los aviones de este tipo (Ala delta) no utilizan flaps, solamente Aerofrenos. En el tren delantero utilice ruedas Sullivan Skylite 1.75, son las más estrechas que encontré.
Posted on: 4/14/2009 10:46 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8680224

RE: MIRAGE 2000B AND MW-44
It is true. Stall is not the correct word, The low speed did that the descend rate was very hight. A better vision of the plane had allowed me to correct the bad approximation. When I fly the Plane was alone, Only wanted to verify that the fixation of the wheels was nice. Finally I decided to put it in flight, but the conditions of visibility were not good. The damage in the plane are repairable, but two new projects do not allow me to repair it for the present time. I recommend the Mirage, want to finish the other planes to begin with his repair. Es cierto. Perdida no es la palabra correcta, La falta de velocidad hizo que la velocidad de descenso fuese muy grande. Una mejor visión del avión me hubiese permitido corregir la mala aproximación. Cuando volé el Avión estaba solo, quería comprobar que la fijación de las ruedas estaba bien. Finalmente decidí ponerlo en vuelo, pero las condiciones de visibilidad no eran buenas. Los daños en el avión son reparables, pero dos proyectos nuevos no me permiten por el momento repararlo. Recomiendo el Mirage, estoy deseando terminar los otros aviones para comenzar con su reparación.
Posted on: 4/7/2009 6:15 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8657043

RE: MIRAGE 2000B AND MW-44
Hello The Mirage flies very well. The first flight was delayed by the fault of the main wheels. The wheels made by Airpower solved the problems. The plane only needed a point of trim in ailerons, his flight was very easy to control. The problem was the color of the plane. The zone of landing was covered by a very dark clouds, the Mirage was very difficult to see. After several attempts of landing, I came to land with a very low speed and the plane stall. Clean stall. El Mirage vuela muy bien. El primer vuelo se retrasó por culpa de las ruedas del tren principal. Las ruedas fabricadas por Airpower resolvieron los problemas. El avión solo necesitó un punto de trim en alerones, su vuelo era muy fácil de controlar. El problema fue el color del avión. La zona de aterrizaje estaba cubierta por unas nubes muy obscuras, el Mirage era muy difícil de ver. Después de varios intentos de aterrizaje, llegué con una velocidad muy baja y el avión entro en pérdida.
Posted on: 4/6/2009 12:34 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8654286

RE: Can someone translate (German) the info about this model? The Sting
Hello What engine has the Sting? I am mounting an equal model. Manuel
Posted on: 1/18/2009 8:12 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8371346

RE: Maj. Woody's Skymaster F-86
[quote]ORIGINAL: AsiaSRC set the wing root at level, I got '0' for stab at the same time I did check wings washout is abt 2deg. AL [/quote] Hello When you write to set wing root at level, you refer to 0 degrees with the incidence meter?. When I set the wing root at 0deg, I got 3 deg up for stab. Which is the correct incidence? Regards Manuel
Posted on: 1/14/2009 11:24 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8357094

RE: Merry Christmas
Merry Christmas to erverbody from Canary Islands - Spain Felíz Navidad y Próspero año para todos. Desde las Islas Canarias -España Manuel
Posted on: 12/24/2008 9:37 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8277740

RE: MIRAGE 2000B AND MW-44
The tailpipe cost is 35 GB puonds. But, Wren sent me the MW54 size. I have an air leak, am thinking about knowing where it is. But I do not reach it with my hands. I hope that the weight does not overcome nine pounds
Posted on: 2/10/2008 7:43 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7052120

RE: MIRAGE 2000B AND MW-44
No time to Mirage, Carnaval
Posted on: 2/1/2008 6:02 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7005893

RE: MIRAGE 2000B AND MW-44
It is true. But, the real plane closes the doors on gear donw. A caprice for my ...
Posted on: 1/11/2008 4:03 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6891210

RE: MIRAGE 2000B AND MW-44
Two servos and three functions, Retracts, Brake and Doors.
Posted on: 1/11/2008 1:55 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6890711

RE: MIRAGE 2000B AND MW-44
Do you know the system to construct ships in bottles? Have you the small hands? The cylinders for gear door (maian) need many patience to install them.
Posted on: 1/11/2008 10:29 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6889937

RE: MIRAGE 2000B AND MW-44
Is a Jetarrows Mirage 2000B from Czech Republic. I bought the manufacturer it directly in Brno. For U.S. find ALTECARERC Mauel
Posted on: 1/5/2008 12:55 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6857899

RE: MIRAGE 2000B AND MW-44
Jetarrows places the C.G. in the front side of the wheels bay. The retracts must be placed like in your drawing. But those that I use (SpringAir 301) do not fit with facility. The angle of placement is a minor of the necessary one. And the distance between the wheels and the C.G would be very big.
Posted on: 1/4/2008 11:41 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6852464

RE: MIRAGE 2000B AND MW-44
Yes, is a MW 44 "old" 7lbs trust. I wait that it weigh in the takeoff nine or ten Lbs. With 48 oz of fuel. Two Dubro of 24 oz I am waiting for the tailpipe. Regards Manuel
Posted on: 1/4/2008 5:47 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6851501

RE: MIRAGE 2000B AND MW-44
The fuselage and wings are one piece. The box of transport is big and weak, my plane came with damages in a wing. Inside the fuselage is possible to place the fuel tanks, the turbine and servos with comfort.
Posted on: 1/3/2008 7:44 AM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6846357

RE: MIRAGE 2000B AND MW-44
Thanks Jhon
Posted on: 1/2/2008 3:54 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6842779

MIRAGE 2000B AND MW-44
Hello All that I can separate the turbine (Wren MW44) of the tail of the plane (Jetarrows-Mirage 2000B) without using tailpipe. In my plane the turbine is placed to 7,4 inches of the tail and the fuselage has a diameter of 3,54 inches. It is sufficient with the thermal isolation and not Tailpipe. Regards Manuel
Posted on: 1/2/2008 3:31 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6842667

RE: F7U Cutlass Airfoil?
Thank you very much. With these tools I can obtain good results. Regards Manuel
Posted on: 8/8/2007 8:26 PM by Author "mberme" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=6213781

RE: F7U Cutlass Airfoil?
Hello Edd The Bill Evans ESA40 is airfoil for flying wings "Planks" I look for a Airfoil for a Tailless Swept wing. I have found the airfoil S5010, it might serve? Thanks Manuel
Posted on: 8/8/2007 9:10 AM by Author "mberme" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=6211384

F7U Cutlass Airfoil?
Hello I would like to construct a F7U to scale 1/7 th. Wings span 70 inches and chord 18 inches. 850 sq. in. To equip it with two EDF 90.(MW 44) The Eppler E334 is a good choice? To use Slats, it is necessary? Thanks Manuel
Posted on: 8/6/2007 7:36 PM by Author "mberme" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=6204504

RE: Are there any new MW44 sized models due in the near future?
NEW MIRAGE 2000 FROM JETARROWS (www.jetarrows.com) Regards
Posted on: 6/25/2007 1:09 PM by Author "mberme" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6032104