|
RE: nitromodels anyone?
sorry dont have away to take pic right now
Posted on: 6/15/2009 7:56 AM by Author "mike07"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8853049
RE: nitromodels anyone?
i have just got in my p40 from nitro it the 60 size i am putting a 91 4 stroke in the plane looked very well build like all the others the instructions is not very good at all if u have not built very many arf's get some help the coving is nice u can go to nitro support and ask questions a guy name john will respond he can help so far the plane is going well it took 5days for it to get here well boxed and taped for 119.99 it's was a very great price i will buy from there again
Posted on: 6/14/2009 9:55 PM by Author "mike07"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8852155
RE: please help p40-e [60] tiger shark
thank u
Posted on: 6/12/2009 9:24 PM by Author "mike07"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=8847857
please help p40-e [60] tiger shark
the manual doen't have the gc or the control surfaces set up can anyone tell me what they are i just recv. this plane on 6-10-09 by ups email address mmorrison002@centurytel.net
Posted on: 6/11/2009 8:12 AM by Author "mike07"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=8843456
RE: nitro plane p40 60 size
looking though the book were is the cg and elev,aliron,rudder set-up think i am going to call them about it
Posted on: 6/10/2009 11:01 PM by Author "mike07"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8842767
RE: nitro plane p40 60 size
so this is a good model then?
Posted on: 6/10/2009 10:51 PM by Author "mike07"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8842735
RE: nitro plane p40 60 size
my plane came today it is the p40-e 60 per the instuctions it says it was made by global hobby its got sportsman aviation hope that clears up what model i brought
Posted on: 6/10/2009 8:51 PM by Author "mike07"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8842398
RE: nitro plane p40 60 size
guy's i dont know if we are talking about the same model from nitroplanes the one i brought is the p40e 63" tiger shark use a four stoke 91 engine
Posted on: 6/8/2009 8:55 PM by Author "mike07"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8836681
RE: nitro plane p40 60 size
please don't tell me that
Posted on: 6/7/2009 10:23 PM by Author "mike07"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8834034
p 40 size 60
does anyone have this planes if so how well does it fly is there any problems mine will be here wednesday thanks
Posted on: 6/7/2009 4:11 PM by Author "mike07"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=8833104
nitro plane p40 60 size
who has one i have just ordered mine will be in wednesday 10 wanted to see who has one and if they liked it
Posted on: 6/6/2009 10:19 PM by Author "mike07"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8831401
p 40e tiger shark from nitromodels
does anyone have this plane the p40e tiger shark size 60 i have just ordered one going to put a os 91 4stroke in it has anyone had any complaints about this plane or has anyone have any good things to say about this planes thanks
Posted on: 6/6/2009 5:10 PM by Author "mike07"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8830820
RE: crrc 26 starting proplems
ok guys i have tryed everthing from resetting the carb to factory setting ot checking plug gap to a rich setting to a lean set to complete flood of the carb still will not hand start but put a electric starter on it starts right away i just dont make any sence i will just keep using a starter
Posted on: 4/25/2009 11:57 AM by Author "mike07"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8714186
crrc 26 starting proplems
my crrc 26 cc engine will only start up by using a electric starter on it can only tell me how i can get this thing to start by hand fliping the prop i have tryed hand starting byfore and it just wears me out please help thanks
Posted on: 4/23/2009 8:11 AM by Author "mike07"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8708001
RE: crrc 26 wont run
hey thanks guys but have problem did have air in fuel line lot of bubbles air leaking around fuel lines i used some bell wire and put it around the lines problem solved i just got done running one tank of gas though it now letting it cool before second tank thanks all problem solved
Posted on: 3/8/2009 2:04 PM by Author "mike07"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8556159
crrc 26 wont run
i have a brand new crrc 26 cc motor today was the frist time on starting it using 25.1 gas/oil mix using lawnboy oil the frist time that it started this morning ran great untill about 6-8 mins into brake in started to run thottle up alittle it died went to restart it was very hard to start but did get it started about the same 6-8mins it died again samething again very hard to start but got it started then died again at that time it would not start period brought it home went though the fuel tank check fuel line plumping all good ck screen in carb ok even removed it adjusted carb from 1 1/3 to 1 1/2 turns did not help used electric starter did not help ck fire very good spark also long has u have it on choke or 1/2 choke it trys to start but wont take choke off wont hit a lick using 4.8 1100 ma battery brand new i am at a lost please help thanks mike
Posted on: 3/7/2009 11:37 PM by Author "mike07"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8554780
RE: new to gas
cool looking for 3d and just flying around not hard core 3d
Posted on: 12/30/2008 5:05 PM by Author "mike07"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8299550
new to gas
question to all what is a really good 50cc gas plane to start with thanks mike
Posted on: 12/30/2008 4:13 PM by Author "mike07"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8299389
RE: convert inchs to degrees please help
thank no other help needed i used the old rule and measured each surface and got them match,,, and john w i did have trig and i just dont remeber it and as for age i am 35 but thanks anyway. can close this forum
Posted on: 9/19/2008 8:13 AM by Author "mike07"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7969426
RE: convert inchs to degrees please help
ok confused here my book says elev on low rate is 3/16 and so on but i want to use my hanger 9 digal meter i really dont want to level up the plane and use a rule to set all the throws like my funtana it give u degrees ie like elev 23 degrees up for low rate thats what i am trying to figer out
Posted on: 9/18/2008 11:21 PM by Author "mike07"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7968815
convert inchs to degrees please help
how do u convert inchs to degrees i have the hanger 9 digal meter thank mike
Posted on: 9/18/2008 9:39 PM by Author "mike07"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7968441
RE: Fliton Edge 540 Freestyle Landing Gear
bkdavy i all so have the 540 and my landing gear did it to there is no landing gear aftermarket that will work and when i did get ahold of filton i was told sorry but said rap it and they also dont have replacment parts so i went to a local sheet metal shop and had them to bend me a landing gear i beleive it 3/16 thick works great no cg or weight change hope this helps mike
Posted on: 8/11/2008 6:23 PM by Author "mike07"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7834477
peakmodel airplanes
does any one have one of the peak model airplanes if so how good is it built and does it fly well i am looking at the 25% with the spe43 gas engine any help thanx mike
Posted on: 8/10/2008 8:06 PM by Author "mike07"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7831033
RE: new to gas
thinks all i am going to get a wildhare extra 300
Posted on: 7/20/2008 2:53 PM by Author "mike07"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=7751900
new to gas
what would be a first good gas powered plane in the 30% size thanks mike
Posted on: 7/18/2008 9:30 PM by Author "mike07"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=7746789
funtana x100 landing gear
need a alt.landing for a funtana x100 does anyone know of one that will work that maybe made out of metal?thanks mike
Posted on: 6/15/2008 9:03 PM by Author "mike07"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7622736
RE: 3D Plane for a Saito 100
i have the filton edge 540 was not bad to build but use two servos for elev in rear i have an os 91 4 stoke on it still lite flys great i love it i also have a kanke cap 232 sport with a saito 100 on it and it fly great also love both planes at this time i am building the h9 funtana x100 with a saito 125 on it hope this helps
Posted on: 6/6/2008 10:08 PM by Author "mike07"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7589551
RE: w to gas planes
i was thinking about the wildhare line but i am not sure
Posted on: 4/29/2008 10:07 PM by Author "mike07"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=7437515
w to gas planes
can anyone help what is a good plane to start in gas with at the moment i am flying nitro engine i have a cap 232 w/h a satio 100 and a filton edge 540 w/h 91 os i am want to go to gas have been flying for two years wanting step up would like to get a very good gas plane but i dont want to go overkill or get one to big that i can't handle i want to start small size as far as gas then work my way up can anyone give me advise thanks mike
Posted on: 4/29/2008 9:48 PM by Author "mike07"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=7437396
RE: Stupid flying put plane in tree
find a guy that cuts trees for a living and get them to climp it and reach from there some guys has bucket trucks that they use we had a guy at our field that he was training his son to fly and he flew into a top of a tree the guy came out with a bucket truck and got it down i think he only charged 60.00 but that is here in arkansas
Posted on: 3/26/2008 9:18 PM by Author "mike07"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7288165
| 
