RE: Official DB-01 Durga Thread
anyone here uses a stabilizer bar for their db01? how do you like it? better handling around sharp corners?
Posted on: 7/7/2009 11:40 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8913350

RE: Official DB-01 Durga Thread
[quote]ORIGINAL: B44&501xRacerEX [quote]ORIGINAL: malice23 SO, sensored or sensorless brushless motor? whats your opinion? [/quote] I run a Tekin R1 Pro Sensorless in my 501, the rotor is sensored but it's wired sensorless. And they dont make the 3T 362 brushless motor anymore it's been discontinued on tower for a while. It's not really a 3T, but more like a 9T brushed motor equivelent. 15/91 is my gearing, temps are barley 150 F after a 7 min run. The only sensoreless I will run is a High Quality Tekin system. I run Novak and LRP systems in everything else I have. [/quote] castle sensorless aint good enuf for you?
Posted on: 7/7/2009 5:19 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8912744

RE: Official DB-01 Durga Thread
[quote]ORIGINAL: BuzzBomber My 2¢: It's a lot less of an issue now with better batteries and better controller software than it was even a year ago. Also, in a 4wd car a silky smooth throttle response from dead stop is a lot less critical than in a 2wd or something like a rock crawler. I'm running a sidewinder esc with the latest firmware and CMS 4600 in my DB01 and I never have any cogging issues or problems getting a smooth start. And yes, I do race it. [/quote] anyway what happen to all the castle esc hype?? it was hot stuff for the past few year till the hobbywing esc came out and regarding he cogging issue i couldnt agree much for me as a basher it dosent matter with a good batt i dont have cogging issue
Posted on: 7/6/2009 11:57 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8910653

RE: Official DB-01 Durga Thread
i think before you get that super stock motor get yourself a slipper clutch first
Posted on: 6/29/2009 12:22 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8890853

RE: Official DB-01 Durga Thread
[quote]ORIGINAL: Ttam Says Blarg Ya I wouldnt buy a front one way for your situation. Its really for high traction surfaces. So unless your constantly on pavement your probably going to loose performance. Put the money into a slipper clutch or something else. [/quote] i totally agree with you on that i had a front 1 way and i really dont like it seems to me like i lose lots of traction when im running on offroad surface
Posted on: 6/26/2009 7:09 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8882248

RE: Official DB-01 Durga Thread
[quote]ORIGINAL: dimblum [quote]ORIGINAL: mog ruith tried the front 1 way on my durga seems that it dosent fit me at all the way it handles and turning was great but seems the front 1 way makes my buggy lose lots of traction compared to the normal diffs is this how its suppose to work?? [/quote] The Front One-Way should only be used for smooth high traction surfaces (carpet, tarmac, etc
Posted on: 6/23/2009 6:42 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8873528

RE: Official DB-01 Durga Thread
tried the front 1 way on my durga seems that it dosent fit me at all the way it handles and turning was great but seems the front 1 way makes my buggy lose lots of traction compared to the normal diffs is this how its suppose to work??
Posted on: 6/22/2009 1:23 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8871561

RE: Official DB-01 Durga Thread
[quote]ORIGINAL: dimblum [quote]ORIGINAL: mog ruith any of you guys running a front one way in your db01??? how do you like it compare to the stock ball diff?? [/quote] I run a center one-way since I race off-road (dirt). The front one-way is great if you are racing on high traction surfaces like carpet or tarmac. Once you get used to them, they are great.. You might want to disable the drag
Posted on: 6/19/2009 10:49 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8864616

RE: Official DB-01 Durga Thread
any of you guys running a front one way in your db01??? how do you like it compare to the stock ball diff??
Posted on: 6/18/2009 12:01 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8862035

RE: Official DB-01 Durga Thread
anyone has the part number to build a new diffs?
Posted on: 6/15/2009 12:56 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8853725

RE: ezrun brushless
hey guys any of you here run a ezrun 4300kv motor with a mamba max esc sucessfully? mine cant any help apperciated here thought both esc and motor are sensorless and thus should work with each other
Posted on: 3/25/2009 11:47 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8617431

RE: Official DB-01 Durga Thread
[quote]ORIGINAL: SidewaysLS4 The new low profile wing...and front spoiler. (I'm waiting for paint [8D]). On the buggy itself...changed to OFNA wheels and belted tires, the Ipanema wheels I used to have on it had major issues, real major, ugh. [/quote] what wing are those? and is that front spoiler from the new 511x?
Posted on: 3/23/2009 12:42 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8607467

m11 and castle creations mamba max
guys i have some probs here with my radio system why is the servo twitchy its kinda like glitching even though the tx is near the rx im using this with my mamba system another problem is ranging issues when the tx and rx is like 10ft apart it dosent have any signals anyone to help a poor chap here [:(]
Posted on: 12/10/2008 12:19 PM by Author "mog ruith" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=8232005

RE: NEW release...coming soon items
well depends on what your track is running some may like a 4wd buggy some like a 2wd truck
Posted on: 11/20/2008 9:26 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8165649

RE: lookin for a new drifter?
so im going to pick up drifting too and m thinking of going shaft, heres my question is the tb02 discontinued since the tb03 is out? cos recently the the tb02d was released any advice would be great
Posted on: 11/9/2008 2:05 AM by Author "mog ruith" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=8128968

RE: Official E-FIRESTORM thread
[quote]ORIGINAL: meanstreak1 [quote]ORIGINAL: mog ruith guys need a little help here regarding the stock esc that come with the firestorm im not talking bout the flux version but the brush esc im using a dx 2 with it but cant get it to brake nor reverse so how do i go about this or anyone has experience this before? [/quote] Did you follow the instruction on adjusting the throttle trim
Posted on: 11/7/2008 9:34 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8125415

RE: Official E-FIRESTORM thread
guys need a little help here regarding the stock esc that come with the firestorm im not talking bout the flux version but the brush esc im using a dx 2 with it but cant get it to brake nor reverse so how do i go about this or anyone has experience this before?
Posted on: 11/7/2008 5:05 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8123089

RE: Official DF-02 Thread
hpi is releasing the brama 10b buggy i think its the df02 rival
Posted on: 11/5/2008 5:10 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8117012

RE: dark impact or durga?
i prefer to go with a shaft driven car, unlike belt it needs more attention and with the durga you will always be tightening the diffs every now and then like i do but in your case weather a df03 or db01 i say go with the db01 the plastics are more durable than the df03 and yeah i love my durga though i got to tighten the diff after every session but thats not so difficult isnt it?? [:D]
Posted on: 10/25/2008 1:45 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8083614

RE: Tamiya Boomerang re-release! Build yours here!
well im hoping for a avante re release [:D] coolest buggy ever built up to date, for me at least
Posted on: 10/22/2008 5:58 AM by Author "mog ruith" in the forum "RC Classic Cars & Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=8072983

RE: Kyosho Lazer ZX5 battery question
sorry man cant help you there i just sold away mine maybe you can post over at rctech in the electric offroad section as theres lots of them there with zx5
Posted on: 10/18/2008 8:04 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8061566

RE: Kyosho Lazer ZX5 battery question
hmm not sure how to answer your question but i used to ran it with a yeah racing lipo and it fits well
Posted on: 10/18/2008 5:13 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8059874

RE: upgrading tamiya rising storm
hey new2heli you ever broke the front shock tower every time you ran ur df02?
Posted on: 10/15/2008 12:04 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8050161

RE: Official E-FIRESTORM thread
hehehe im just curious bout my fs its still new though.... [:D] i have been following this thread till i finally got it yesterday btw my fs cant wheely yet cos i dont know how to i got a yeah lipo and mamba max 5700kv motor all equipped an im using hpi truck super radial tires....
Posted on: 10/10/2008 7:26 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8035761

RE: Official E-FIRESTORM thread
awww man i forgot to mention i changed the esc and am now using a spektrum radio with mamba pair with a 5700kv motor
Posted on: 10/9/2008 1:39 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8033556

RE: Official E-FIRESTORM thread
just got an efirestorm today great truck how do i wheely on demand? what are the set up? my truck is till stock
Posted on: 10/9/2008 1:07 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8033472

RE: Tamiya Gravel Hound
its obvious, go lipo [:D]
Posted on: 9/26/2008 2:29 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7993252

RE: Official DB-01 Durga Thread
hey druss me and some other guys over at oople has experience this thus im asking if they are any good
Posted on: 9/25/2008 1:21 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7989766

RE: Official DB-01 Durga Thread
i guess some of you guys here has got theose 3 racing alu suspension mount are they any good? and how do they perform? does it prevent the dogbones from popping off after a crash? right now i shim my hingepins so they do not pop out afetr jumps or crash but after seeing it at my lhs im thinking of getting it plus it adds the bling factor [:D]
Posted on: 9/25/2008 12:14 PM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7989565

RE: official Brama 10B thread
something interesting about the e10 is that the motor position can be switch if im not wrong? i mean switch the motor pose for eitheir drift or touring...... is this true?
Posted on: 9/23/2008 11:28 AM by Author "mog ruith" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7982856