RE: FEJ Where We're Goin' Tomorrow
that a smart business would be targeting. [quote]ORIGINAL: Bob Toilet Hi molo_30 I think a lot... etc. (and i agree), but FEJ is getting better and better. Christian [quote]ORIGINAL: molo_30 Bob
Posted on: 10/28/2009 5:37 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9210113

RE: FEJ Where We're Goin' Tomorrow
Bob I hear where you coming from but lets be realistic, how many people can afford to purchase a sled that large and put two 160 size turbines in it? I think that FEJ have a plethora of large models now and need to concentrate on the smaller sizes. Firstly fix the ones released already and secondly trying to lure the first timers with the smaller cheaper models. If you FEJ can provide a good first time experience for a new jet modeller than they will get repeat business when the customer wants to upgrade. I personally can't see them selling more than 20 - 30 big F18s just due to the fact that customers will need a truck to move it. Not exactly a sunday flier. My two cents.
Posted on: 10/28/2009 4:28 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9209845

RE: UKR-JET-MiG-29 (9-13), MiG-29 KUB, MiG-29 SMT, MiG-29 OVT, MiG-35, Yak-15
Looking great Alex. Keep the pictures coming!
Posted on: 10/23/2009 4:42 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9196602

RE: Jet Central Problems ... warantee???
This forum never ceases to amaze me...... Like watching a train wreck.
Posted on: 10/19/2009 6:21 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9184641

Building a fuse
Hi guys, I have access to a couple of professionally built moulds and need to know if anyone can point me in the right direction. Basically I need directions from start to finish on how to lay up a fuse in the mold. Maybe youtube or some other? Thanks.
Posted on: 10/14/2009 5:24 AM by Author "molo_30" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=9171968

RE: New pipes being developed by UKR-JETS
HI all, just wanted to show you the first batch of pipes I ordered off Alex. Turned up today, no damage and one of the best professionally packed products I have ever seen. The only way these would be damaged would be if they were run over by a truck! Thanks Alex.
Posted on: 10/7/2009 12:21 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9152899

RE: New to jets, what do i need to fly a jet??
Todd, did you get the pipe sorted on your F16 mate?
Posted on: 9/23/2009 1:45 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9117143

RE: 2009 Temora Jet Meet Australia 18/19/20 September
Yeh mate, I will see you on Sat.
Posted on: 9/18/2009 4:22 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9106054

RE: 2009 Temora Jet Meet Australia 18/19/20 September
Hey Mav, you still got the Falcon for sale?
Posted on: 9/17/2009 5:46 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9103766

RE: Another new F100, Skymaster
Same old same old. Its getting really tiresome with all the same models coming out. Why can't these chinese manufacturers make something different for a change, unless they are coming from the same mold........
Posted on: 8/29/2009 5:51 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9054865

RE: New pipes being developed by UKR-JETS
HI Alex, the pipe looks great! The first pipe is now installed and have flown twice. It is better suited than the original pipe. Has a different sound too for some reason. All up a great product thanks!
Posted on: 8/28/2009 5:55 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9052678

RE: Merlin Kero Start
Maybe you should be asking these questions to the person you bought the engine off? Seems like a waste to convert it back to gas start. Just get it sorted first.
Posted on: 8/28/2009 6:31 AM by Author "molo_30" in the forum "Merlin Turbine Clinic"
http://www.rcuniverse.com/forum/fb.asp?m=9051342

RE: FLy Eagle Jet Models
Wessa, as I said 12kg MG on the Stabs is more than fine. They will not need more than 12kg of force even diving at the ground as I have tried it. Have fun!
Posted on: 8/26/2009 5:32 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9045877

RE: JetJoe JJ-1400 Start-Up Problems
My bad, I didn't read to the bottom.... Can you run the starter in test mode?
Posted on: 8/23/2009 7:15 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9037357

RE: JetJoe JJ-1400 Start-Up Problems
I'm also guessing you have the fuel and gas solenoids plugged into the other. Try swapping where they plug into the ecu and give it a start. Please let us know the outcome.
Posted on: 8/23/2009 6:28 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9037310

RE: LiFePO4 batteries
Thanks for the info guys. Attached is my charger manual, it is for a triton but they are similar. I have attached a photo. After looking at the link Guver it seems my packs are missing the power wires? It has the balance wires only? Also when I select 2s1p on the website it shows 1 red and 2 black for the balance plug, my pack has 1 red and 3 black. Sorry for all the questions but I'm trying to figure out how to use these safely and cannot for the life of me sort out the wiring.
Posted on: 8/21/2009 5:40 PM by Author "molo_30" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9034227

LiFePO4 batteries
Hi guys, I have just purchased 2 LiFePO4 packs: 1. 6.4v 3000mah 20C 2 9.6v 4200mah 20C I am new to these packs so could anyone help me with: a. Charging, I have a Swallow 2 AC/DC and can't get it to switch from LiPO to Li ion b. Do these packs need balancing as the packs only came with 4 wires, 1 red and 3 black? And which black wire do you solder to the negative on the deans? c. Do you need to cycle them? Any help with this would be much appreciated. Thanks.
Posted on: 8/21/2009 7:35 AM by Author "molo_30" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9033031

RE: Servo mounts, with or without groummets??
I wouldn't do it either. They are there for a reason.
Posted on: 8/20/2009 5:02 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9030187

RE: How do I tighten up a full flying stab???
Either way you do it good luck. The way I did it has been successful and I imagine is less brittle than Ca is. I've got at least 20 flights on it now. Just be sure it doesn't stick!
Posted on: 8/20/2009 4:10 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9030164

RE: How do I tighten up a full flying stab???
Yeh mate just keep it in there and keep turning it 90 degrees each time as it sets, then once its nearly set pull it out and clean the wax off. Some on here may have a better way but I just used a candle and dripped the wax on the shaft. Then I just used a small flame to heat the wax and let it run very thinly over the shaft. Once you have a go you'll see what I mean. Cheer.
Posted on: 8/19/2009 5:16 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9027672

RE: How do I tighten up a full flying stab???
Hi Paul, I had the same problem on my Scorpion. What I did was: 1. Cover the stab rod with a thin layer of wax (with a candle) 2. Put epoxy in the hole and smeared it right thru 3. Then put the elevator into the tube and wipe off the excess epoxy that comes out inside 4. I left it for 30 mins as I was using 60 min epoxy then slowly twisted it every 30 mins until the epoxy was hard. 5. I then removed the elevator and cleaned all the wax off and refitted. Took out the majority of the slop on mine and has been fine since. Oh and don't forget to fill the threaded part of the rod with wax!
Posted on: 8/18/2009 2:58 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9024823

RE: Please help me diagnose this FEJ pipe.
Pete, heres mine out of my Scorpion. This is a supposedly a quality supplier in France. Its rubbish. You can see the blueing and the wrinkles starting I would throw it in the bin and get FEJ to send a new one for the cheap price. Don't risk your model with these pipes. Or get someone to make one for you. I tried to get Tam to do one for me but he's obviously very busy as I haven't heard back as yet. Your choice either way but just look at Andys predicament to see why we are erring on the cautious side!
Posted on: 7/27/2009 6:44 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8968640

RE: Pusher props
Thanks Bob, as for muffler I have put a bison pitts style muffler on it. Or you could contact weston uk and get one of their pusher tuned pipes.
Posted on: 7/26/2009 10:46 PM by Author "molo_30" in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8966486

Pusher props
Hi guys, I have a Keecat 65 that has a ST75 on board with a 12 x 6 3 blade pusher prop. Screams its head of and hardly goes anywhere. I have looked high and low for a different prop. Does anyone know where I can get a 3 blade around the 11 x 8 or 11 x 9 pusher? Thanks.
Posted on: 7/26/2009 6:49 AM by Author "molo_30" in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8964396

RE: *Help me locate stolen jet!*Seeking buyer of AD F-16/p-120 in May from Orlando, FL hobby shop
Just FYI, there was a F16 listed on alibaba a few weeks ago with a 120 in it. It was in Indonesia. I asked them why so cheap (I think is was $2000US) they said it was because the seller needed the cash quick. Dodgy.
Posted on: 7/26/2009 4:14 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8964335

RE: AD Scorpion quick build thread
Hi Anderhau, I have a Black Mamba in mine wound up to about 14kg and it handles that no problems. I think you'll find no problems. [youtube]http://www.youtube.com/watch?v=zCX8DO_LFuk[/youtube]
Posted on: 7/20/2009 7:51 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8948186

RE: FEJ Rafale/P-60 pipe distance and..
Thats correct Pete.
Posted on: 7/17/2009 6:43 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8942091

RE: A heavy, thirsty F-16...
Guys, can you just confirm that the taxi tank plugs into the breather on the aircraft and just removed before flight? I have never used one of these before. Could some draw up a simple diagram to show how they work? Thanks.
Posted on: 7/15/2009 4:51 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8934817

RE: Avro Arrow CRASH
http://www.youtube.com/watch?v=8S499EsdupY&NR=1 Happens all the time, full size and model. Do we ban it? Or mitigate the risk?
Posted on: 7/6/2009 5:22 AM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8910011

RE: How do you store your jets?
edited
Posted on: 6/29/2009 4:39 PM by Author "molo_30" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8890069