|
RE: Nova Rossi/Rex R21B/1
I bought one that I have yet to break in so I can't speak to the reliability. However, it is a low end engine. I'm going to run an 086 pipe to give it a little top end.
Posted on: 12/27/2005 10:05 AM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3696209
RE: R/C center for Land and Air Idea.
I posted a similar question a few days ago on this board and the 1/8 scale buggy board. Look for "Air and Land - same Location? "
Posted on: 9/19/2005 11:52 AM by Author "moose24"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=3372494
Land and Air R/C - Same Location?
Does anyone know of any R/C parks where there are air and land vehicles together? We have an air club nearby that is on city property and I was thinking of pursuing adding a track. *IF* the city would go for it. Do you guys think this would work? Are there any Major concerns? Thanks for any input.
Posted on: 9/16/2005 2:19 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3364780
Land and Air R/C - Same Location?
Does anyone know of any R/C parks where there are air and land vehicles together? We have an air club nearby that is on city property and I was thinking of pursuing adding a track. *IF* the city would go for it. Do you guys think this would work? Are there any Major concerns? Thanks for any input.
Posted on: 9/16/2005 2:18 PM by Author "moose24"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=3364777
Anyone run a Collari B3 ?
If so, what pipe are you running?
Posted on: 7/7/2005 2:11 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3144936
RE: Official Mayhem Thread
It pulls out. There is more power with the 9mm. It just takes some practice to control the throttle.
Posted on: 6/21/2005 4:11 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3095282
RE: Mayhem clutch shoes?
While you're taking stuff apart, you may want to consider going to a 13 or 12 tooth clutch bell for more bottom end. You should have a 14 tooth on there right now.
Posted on: 6/9/2005 11:28 AM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3057220
RE: Mayhem glow plugs?
I run an OS A5 with Byron's 20% in Mayhem .26
Posted on: 6/6/2005 4:40 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3048113
RE: Well I did it,Im a Mayhem owner
You may want to change to a 12 or 13 tooth clutch bell and possibly a new pipe if you want low end. These engines are not known for low end. Before you get finished with your first gallon, you need to take the clutch bell off and check your clutch and bearings. I haven't heard many, if any, makiing it through the first gallon.
Posted on: 6/1/2005 9:57 AM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3031797
How many gallons from Mayhem RTR?
How many gallons can I expect to get out of my .26 on my Mayhem RTR? Has anyone had theirs long enough to find out?
Posted on: 5/25/2005 4:27 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3010756
RE: Mugen MBX5 up
Is it just me or are 3 of the 4 tires mounted in the wrong direction? If so, I can only give $100 for it. [:D]
Posted on: 5/25/2005 2:43 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3006813
RE: Official Mayhem Thread
[quote]My engine runs in between 240-300[/quote] I would think that is getting dangerously high. I try and keep mine lower than 230.
Posted on: 5/18/2005 11:45 AM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2987025
RE: Mayhem Pro vs RTR?
Horizon Hobby will carry all the parts and yes, you can upgrade to the pro shock towers at any point.
Posted on: 5/16/2005 2:54 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2980567
RE: Mayhem Pro vs RTR?
From scrapheep: [quote]RTR has the typical grease in the diffs. [/quote] The RTR has 5-5-1 fluid like the pro. The pro has thicker shock towers. However, the RTR towers are pretty dang good.
Posted on: 5/16/2005 10:56 AM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2979910
RE: offroad track in the Huntsville, AL area???
Go to this link and look for "off road racing in Cullman, alabama". There is a thread just for that track. I race at a track in Wilsonville. Look for a link for Shelby County started by Joe Horton. That's my local track. [link]http://techtalk.teamtrinity.com/tt/forumdisplay.php?f=15&page=2&sort=lastpost&order=&pp=25&daysprune=30[/link]
Posted on: 5/11/2005 8:43 PM by Author "moose24"
in the forum "RC Regional Racers & Bashers"
http://www.rcuniverse.com/forum/fb.asp?m=2966451
RE: offroad track in the Huntsville, AL area???
There is a track In cullman, maybe less than an hour south. I've never been there, so I can't tell you more.
Posted on: 5/11/2005 4:18 PM by Author "moose24"
in the forum "RC Regional Racers & Bashers"
http://www.rcuniverse.com/forum/fb.asp?m=2965575
RE: Official Mayhem Thread
I haven't run that body or those wheels yet and I sprayed the suspension down with WD40. [:D] There are guys at our track that clean theirs up and make it look brand new after every race. I don't know how they do it.
Posted on: 4/29/2005 2:07 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2926541
RE: Official Mayhem Thread
My latest paintjob for the Mayhem. I'm going to add a yellow wing to match. [img]http://www.hunt101.com/img/280359.JPG[/img] [img]http://www.hunt101.com/img/280358.JPG[/img]
Posted on: 4/29/2005 1:20 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2926393
RE: GS or Mayhem
Mayhem!
Posted on: 4/29/2005 9:43 AM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2925788
RE: mayhem rtr won't start
Use your idle stop screw on the carb(under the high speed needle) or adjust the throttle trim on the transmitter.
Posted on: 4/28/2005 2:33 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2923225
RE: Anybody ever have Problems with JR Z650M High Torque MG servo?
I'm using one in Mayhem buggy. It's been great. I did break the case where it mounts to the servo bracket. It's a lay down servo design so that may have had something to do with it.
Posted on: 4/28/2005 10:03 AM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2922496
RE: mayhem rtr won't start
One more thing. This may sound stupid. But, check your starter and make sure the wand is turning. A buddy of mine stripped his starter gear out(its plastic) on his first tank due to a tight engine. They make a metal gear replacement. The starter motor will turn and the wand will not thus not turning over your engine.
Posted on: 4/28/2005 9:37 AM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2922425
RE: mayhem rtr won't start
Unplug the pressure line at the pipe and the fuel line at the carb and blow through the pressure line. Be careful when the fuel comes out of the line though. Also, make sure the lid on fuel tank is sealing good. There is a screw in the center of the lid that can be used to adjust the fit.
Posted on: 4/27/2005 3:02 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2919790
RE: mayhem rtr won't start
I say play with needles until you can get it to run. I helped a buddy break his in and we had to lean it out(low and high) to get it to run. As long as you watch your temps during break in, I would think you would be fine even if it is leaner than factory.
Posted on: 4/26/2005 9:16 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2917233
RE: Official Mayhem Thread
Giles or anyone else, What diff fluids are you running with your large carb intake. I changed to the large intake yesterday and I believe I may have too much power going to the rear. I'm running 5-7-1. Of course, it sounds like I need to check the front and rear anyway. I've never had them open.
Posted on: 4/26/2005 10:12 AM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2915067
RE: ████STADIUM TRUCK OR BUGGY?????████
MAYHEM RTR Buggy!!!!! On Ebay you can get out-the-door for under $450. However Foxy42 is correct. You'll need another $200 for supplies if you have not been in nitro before.
Posted on: 4/22/2005 3:05 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2902280
RE: JR R135 RX Voltage
Mine was a little more difficult because I have the transponder using the aux slot and my switch has those dang BEC connectors. I believe I'm in bussiness now!
Posted on: 4/22/2005 2:21 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2902171
RE: JR R135 RX Voltage
On a stock setup, if you plug the battery directly into the RX then what is the on/off switch hooked into that would make it work? The power supply needs to pass through the switch for the switch to work. Anyway, after buying a few adapters, I now have my battery and transponder sharing the aux slot and going through the on/off switch.
Posted on: 4/22/2005 1:58 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2902116
RE: JP-1 on mayhem gains??
Also, you will have to trim your body due to the round(smooth flow) header.
Posted on: 4/21/2005 4:22 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2899268
RE: JR R135 RX Voltage
livethemoment, Don't forget that if you do so, you are bypassing the on/off switch. I may have it figured out but I'm going to end up with a RX box full of wires! This is a pain in the butt. I'm not sure why JR does this.
Posted on: 4/21/2005 2:14 PM by Author "moose24"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=2898887
| 
