RE: Diff fluid in Ofna Hyper Sprint
Spoke with Ofna today and they said the stock diff fluid in all three diffs is #3000..Hope that will help someone else having the same issues. All three diffs in my car were pretty much out of diff fluid.
Posted on: 10/12/2009 3:34 PM by Author "mowery1" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9167080

RE: Diff fluid in Ofna Hyper Sprint
It doesn't........It only says (hard)
Posted on: 10/10/2009 8:17 PM by Author "mowery1" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9162455

Diff fluid in Ofna Hyper Sprint
Anyone know what weight diff fluid comes standard in the Ofna Hyper Sprint??? My diffs seem to need more fluid and was wondering what to use.....Thanks..
Posted on: 10/9/2009 7:55 PM by Author "mowery1" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9160309

RE: SPEKTRUM DX3S
Just intalled my Spektrum Dx3S telemetry tonight and there has to be a better way to get those rpm decals to stick to the flywheel....Wondering if a guy could use chrome paint to make a dot on the back of the flywheel...I'm using associated flywheels which are dark in color......Saw a thred on another site where a guy had a shiny flywheel and used black nailpolish to make his dot on the flywheel...makes sense...Those decals would never stay on after a few runs....Any tips on this would be helpful..Thanks...
Posted on: 10/4/2009 10:06 PM by Author "mowery1" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=9146924

RE: Factory Team RC8 electric conversion
That electric truggy is pretty impressive!! Doing that back flip was pretty cool.....I think I'm going with the Associated conversion and the Castle Creations Momba Monster system with the 2200kv motor....
Posted on: 9/19/2009 2:35 PM by Author "mowery1" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9107928

RE: Factory Team RC8 electric conversion
I'm a dealer for Castle so that would be a deciding factor for the motor/esc combo....
Posted on: 9/10/2009 7:24 AM by Author "mowery1" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9083701

Factory Team RC8 electric conversion
Now that the conversions have been out for a while and have been tested by some of the best drivers out there...What is the best set-up right now for the RC8....I'm looking at the Associated conversion kit unless there is something better.....The big question is best motor esc combo for the RC8 conversion..I realize this may be a personal choice but would like to hear your opinions before I spend large summs of money...Thanks for the help!!
Posted on: 9/9/2009 9:48 PM by Author "mowery1" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9082870

Novarossi Toro Nero .21
I'm looking into purchasing a new NovaRossi Toro Nero .21 or the motor Adam Drake is running the buggy plus 4......We race mainly a big oval with straights in the 150' range..So i was looking for a high rpm motor with a lot of low end torque....I'n thinking the Toro meets those qualifications, if not someone who owns one or maybe even something else please let me know what you think of motor choice for a track like this....Running 1/8 scale LM and also the new ofna 1/8 scale sprint car......46 spur and 16T pinion may go a bit smaller on the pinion for more acceleration.....Any thoughts appreciated....
Posted on: 8/30/2009 3:03 PM by Author "mowery1" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9056792

Ofna 1/8 scale sprint car
Just purchased the ofna 1/8 scale sprinter and have pretty much finished the build and set up with the exception of the remote glow adapter ofna sent....The part that connects to the glow plug has a spring inside. The internal diameter of the spring is too large a diameter to stay attatched to the glow plug....So if someone who has this car would chime in here I'd truly appreciate it!! Thanks,
Posted on: 8/23/2009 4:39 PM by Author "mowery1" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9038276

RE: RCLander products...
The SAPAC Modern Military Jet resembles the famous and very advanced Raptor Jet. The SAPAC Modern Military Jet exemplifies the same beautiful lines as the original fighter jet. The wing and body used in this Modern Military are specially designed to allow high G maneuvers, yet keep a very low wing load. The Modern Military Jet is a stable aircraft with excellent performance. Designed with twin ducted fans with brushless motors, the Modern Military Jet has great performance and power. You can fly any aerobatic trick desired and the power system designed for the Modern Military Jet provides the capability to fly it in more than low to moderate wind conditions. The Modern Military Jet is controlled with a 4-channel R/C system. On the ground you have control of the steerable nose gear, in the air you have speed, ailerons, elevator and no rudder. The large capacity and high rate LiPo battery provides exuberant energy and because it features a safeguard, it is impossible to discharge your battery excessively. Specifications: Fuselage Total Length : 44" Wingspan : 31.6" Main Wing Area : 3.982sq.ft Wing Loading : 0.952oz/sq.ft Flying Weight : 35.273oz Power : EDF64X2 Thrust : 37.037oz Color Box Dimension : 44.6" X 13" X 9" Carton Dimension : 45" X 19" X 26" (4 color box per carton) Transmitter : 4 channels Receiver : Mini 6 channels Servo : 8g servo ESC : 25A Motor : Outrunner 2830, KV3800 Battery : 3S 3000MAH 15C Fan : Two, 6 paddle 64MM Electric Ducted Fans What's in the box? Aircraft: Pre-painted fuselage in USAF air superiority camouflage, wing and control surfaces; pre-attached decals, instructions, landing gear, styrofoam-safe adhesive, though we recommend using 12 minute epoxy instead. (Please see below.) Mechanical/Electronics: Engines, fans and all electronics are pre-installed, lithium-polymer battery, four channel radio transmitter. What's needed to complete? The transmitter requires eight AA batteries. We recommend using alkaline batteries for better reliability. Instead of using regular glue for construction, we recommend using 12 minute epoxy for maximum strength and durability in high-g maneuvers. Aircraft requires minimal assembly: simply glue the wings and control surfaces on, mount the landing gear, install the batteries. Servos are pre-installed, simply plug in the connectors. The canopy fastens on to eight magnetic attachment points for easy access. Additional Information: $189.95
Posted on: 8/6/2009 4:49 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8995616

RE: RCLander products...
Gear works great...More heavy duty than what you see on RCLander....website is www.rcjetsunlimited.com
Posted on: 8/6/2009 4:16 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8995518

RE: RCLander products...
Not sure yet....I'm already a dealer for Sapac....Might look into carrying RC Lander as well.....On the lipo's..I've been buying from Hobbyking myself..That's where the 4900mah lipo's came from........Question for you..Does your F9F take a long time to get off the ground?????
Posted on: 8/6/2009 3:56 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8995465

RE: RCLander products...
I've been flying the fire out of this plane and just love it!! Fits in the back seat of my dodge dually perfect...I've got way tooooooo big of a lipo though..4900mah lipo's are too heavy for this bird....Takes for ever to get off the ground then when it does it shoots almost straight up...Kinda scary...But once on the air it flies great!! Looking for lighter lipo's as I'm writing this...Maybe a 3300 or a 3700mah....380grams or less
Posted on: 8/6/2009 3:31 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8995401

RE: RCLander F-16 SEPO foam???
Thanks, I'll check out the build thread...
Posted on: 6/29/2009 9:36 AM by Author "mowery1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=8890387

Hobby Lobby edf jets
Anyone on here had any experience with Hobby Lobby's edf jets...i'm considering getting either the 70mm F-16 0r the F-5....Any advice on their jets would be appreciated before I pull the trigger on one of these...Just need to know about the quality of the components and airframe...Thanks,
Posted on: 6/27/2009 4:29 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8886177

RCLander F-16 SEPO foam???
Are the RC Lander F-16's Nitro models show in stock the new SEPO foam??? Do they have the newer metal retracts??? Hopefully someone from Nitro models will respond to this...
Posted on: 6/27/2009 3:19 PM by Author "mowery1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=8886055

RE: Top Flite AT6 ARF
Hey guys, I have a new in the box Top Flite AT-6 Texan I'm selling for $250.00 shipped any where in the USA.....If ya know of anyone looking it's listed on here in the warbirds section for sale...Thanks..
Posted on: 6/26/2009 5:34 PM by Author "mowery1" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8883728

6S power from two 3S lipo's
Quick question...I need to get 22.2 volts (6S) from two 11.1 volt lipos (3S)......Do I make a adapter wired in series or parallel?? This electric stuff is new to me so I need some advice here.....Thanks,...........A diagram, directions or even a pic would be helpful as well....[8D]
Posted on: 6/24/2009 10:46 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8878699

RE: I want to try EDF, I don't know where to start!
Rob's a super guy and very helpful..I just ordered the RC Lander F9f panther from him....Looking forward to my first EDF jet as well..
Posted on: 6/23/2009 4:40 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8874706

RE: RC Lander F-16D
The manual doesn't really show the servo installation...Are they to be glued in or is there some sort of rail to attatch to.....my first foam jet so this is new to me..Thanks for the help!
Posted on: 6/23/2009 4:37 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8874696

RE: RCLander F-16 power requirements
I'm talking with Electric Jet Factory..I just purchased the F9F from him and I'm considering buying the F-16 from him....Tell me about your buddy who sells them...I just purchased a couple of lipo's from Hobby city..
Posted on: 6/20/2009 11:12 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8868142

RCLander F-16 power requirements
Anyone flying the RCLander F-16 using a single 3S lipo??? And if so will a 3S 20c 2200mah lipo do the job.....I'm getting ready to order the F-16 but would like to use my 3S lipo's that I already have rather than purchase differnt batteries...Let me know....Thanks,
Posted on: 6/20/2009 7:02 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8867662

RE: BEST DEALS ON QUALITY 11.1 LIPO'S
Is there a different web address for the USA warehouse??
Posted on: 6/15/2009 6:32 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8854548

RE: BEST DEALS ON QUALITY 11.1 LIPO'S
Aren't they located in Hong Kong?? What does shipping run you and what is the time frame on getting the products??
Posted on: 6/14/2009 7:37 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8851794

BEST DEALS ON QUALITY 11.1 LIPO'S
Where are you finding your best deals on 11.1 lipo's?? Just ordered the RCLander F9F panther and I'll be using two 11.1 lipo's in series so I'll need to order some lipo's....Thanks,,,,,
Posted on: 6/10/2009 8:43 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8842385

RCLander products...
I'm considering purchasing my first EDF jet and I'm looking at the RCLander products (the F-16) and would like to hear from someone who actually owns one as to the quality of construction and hear about the fan/motor combo version if that was included in the deal......Thanks, I have some new 3S 25C lipo's..will they fly one of these EDF aircraft??
Posted on: 6/3/2009 8:38 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8823552

RE: F9F RC LANDER
I'm considering getting one of these or the F-16...What do you think of the quality and did you get the RTF version?? Thanks, ...Lastly who did you purchase from??
Posted on: 6/3/2009 8:32 PM by Author "mowery1" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8823538

RE: RCjetmodels Huge sale!
Wagner, What do you have in stock of the F-4 combo?? What color schemes that is..Thanks,
Posted on: 5/6/2009 2:52 PM by Author "mowery1" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8745855

RE: how to keep rubber diverter on muffler ?
Cleaned mine with alcohol and it still come off of the Saito muffler....I'll try the groove procedure and see if it works.....Thanks..
Posted on: 5/4/2009 9:51 PM by Author "mowery1" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8741150

RE: Hangar 9 40 Size Piper Pawnee!!!
At 2 1/2 inches my tail drops......At 3" the plane balances almost perfect...At 3 1/2 inches the nose drops.....Ok to fly with the CG at 3 inches???? Need some input from someone who has this plane and has flow with this balance point..Thanks,,,
Posted on: 5/3/2009 9:00 PM by Author "mowery1" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8737809