RE: Super Tigre .90 Flying Weight..
I can't as my tach got destroyed by the lawnmower.[:@] Had the engine on my Mojo which weighed 6.75 or so wet and it had unlimited vertical. This was running 0% fuel also. Put a Saito 100 on it and and with the same prop, vertical is about the same. The Saito has instant throttle response when running 33%, (not the best with 0%). Way better for 3D work. A Xoar 15x6 is recommended for the 100, and might work good on the .90. Spool up would probaly be better also being as it's lighter.
Posted on: 9/2/2012 1:06 PM by Author "mrbigg" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11214673

RE: Super Tigre .90 Flying Weight..
You'll probably be alright. Mine likes an apc 15x4W.
Posted on: 9/1/2012 6:31 PM by Author "mrbigg" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11213938

RE: MINTOR 220 engine , is it good ?
You'll need to do some research at some giant forums. Not too many flying the big Mintors here.
Posted on: 8/5/2012 4:10 PM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11182062

RE: High rpm 20cc motors
Anyone know if the Mintor 22 is a little bit more powerful than the DLE 20?
Posted on: 8/5/2012 4:07 PM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11182058

RE: Lithium Ion batteries
Why still use Li ion? A123's are tons better. I quit using Ions myself.
Posted on: 8/5/2012 5:44 AM by Author "mrbigg" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11181465

RE: DLE vs 3W,DA,Zenoah even OS
DA for gas newbies that have the bucks. They are known for good service and help for new gas users.
Posted on: 8/2/2012 4:09 PM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11178976

RE: Black Horse Pitts
[quote]ORIGINAL: JariV Maiden flight: http://www.youtube.com/watch?v=8mwmytVSpVQ [/quote] Nice vid!
Posted on: 5/28/2012 5:44 AM by Author "mrbigg" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11097138

SC10RS' with HiFlow Bodies
These are me and my daughter's trucks. Did my shceme up like the old RC10 that is on the box. She liked the scheme but it had to be pink.[:)]
Posted on: 5/18/2012 8:39 AM by Author "mrbigg" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11085593

RE: SC10RS' with HiFlow Bodies
Thanks. A group of older girls at the track loved it. They said it was their favorite body there. Imagine that.[:)]
Posted on: 5/18/2012 8:39 AM by Author "mrbigg" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11085756

RE: GW MX2 Carb / Firewall Interference Issue...>>>
I always plan for a hole in the firewall with a rear carb engine. I think I got lucky once and didn't have to have a hole.[:)]
Posted on: 5/18/2012 6:52 AM by Author "mrbigg" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=11085604

RE: Uploading issues
Working now. Thank you!
Posted on: 5/18/2012 6:34 AM by Author "mrbigg" in the forum "Forum questions or problems"
http://www.rcuniverse.com/forum/fb.asp?m=11085585

RE: SC10RS with Pro Line Buggy Body
Here they are. The copper sparkles big time, just doesn't show it in the pics.
Posted on: 5/18/2012 6:33 AM by Author "mrbigg" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11085584

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
[quote]ORIGINAL: Brian Smith Don't forget that you can read you plug as well. When the mix is right it will be tan on the electrode. Not real dark... too rich.. Not light grey...too lean. That is very hard on the engine.. Just a thought. I check mine every so often just to be sure...Brian [/quote] Good thing to do every now and then.
Posted on: 5/18/2012 6:10 AM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11085557

RE: Control question.
Seen planes crash because of a clevis' popping off. Never seen a ball link fail. Also seen a fool running clevis' on a 102cc plane.[X(]
Posted on: 5/17/2012 8:25 AM by Author "mrbigg" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11084374

RE: Uploading issues
Same problem. Please fix it. Would like to share my pics with my friends here without having to use an outside upload site.
Posted on: 5/17/2012 5:28 AM by Author "mrbigg" in the forum "Forum questions or problems"
http://www.rcuniverse.com/forum/fb.asp?m=11084165

SC10RS with Pro Line Buggy Body
Pics don't really do the paint justice. Alot more sparkle in person. Copper metal flake in Faskoat, then brown after. Can't load pics. This site needs to fix it's problems. I'll try later.
Posted on: 5/16/2012 9:25 AM by Author "mrbigg" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11083055

RE: lottery list
I forgot the most important thing- full time mechanics having everything ready to go at a moments notice. Kinda like Jay Leno and his garage.
Posted on: 5/14/2012 4:18 PM by Author "mrbigg" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=11080710

Zenoah G29?
Was looking at car mag last night and seen an ad for a Zenoah 29cc engine. Went to Horizon's site and seen it listed. No airplane version. Wonder if they have any plans to do one up for airplane use. Most of the new electronic ignition versions are out of stock. Looks like it was a smart move to finally update this engine line.
Posted on: 5/14/2012 8:08 AM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11080190

RE: Saito 91 intake valve leaking will not run.
New valve springs wouldn't hurt either, providing the valve seat isn't damaged.
Posted on: 5/12/2012 5:57 AM by Author "mrbigg" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11077864

RE: Looking for new engines
ZDZ 40 is the engine you need. Rear carb and I believe you can still get the rear exhaust version. Should have no problem spinning your 3 blade prop.
Posted on: 5/5/2012 7:03 PM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11069823

RE: How much would you pay to join a local R/C club ?
The track I was at Saturday with my two kids cost me 10 bucks apiece to practice. Don't know if that got us into the races or not. We're not into to racing, so I didn't ask. Track opened at nine and races started at three.
Posted on: 5/1/2012 6:26 PM by Author "mrbigg" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11064694

RE: Want to get into larger electrics...worried...
The safe is the way to go. Twenty bucks is worth the piece of mind that my house or car won't burn down. If that safe can keep fire out, it will keep fire in as well. Not to mention it protects the packs when transporting them.
Posted on: 4/22/2012 1:41 PM by Author "mrbigg" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11052476

RE: Want to get into larger electrics...worried...
This is what I use to store my LiPo batts. Holds quite a few. [link=http://www.sentrysafe.com/Products/1/1100_Fire_Chest#panel-1]Sentry® Safe 1100 Fire Chest[/link] Take all the batts to and from the field in this thing. I believe it was under 20 bucks on sale at Farm and Fleet.
Posted on: 4/21/2012 11:32 AM by Author "mrbigg" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11051155

RE: New SV Gassers
ebay. Tried finding the champion around here and could only find the non resistor versions. Ordered a bunch a while back so I'm stocked up.
Posted on: 4/10/2012 5:06 PM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11036770

RE: US Engines 41, who services them?
What do you need done?
Posted on: 4/6/2012 5:37 PM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11031258

RE: Quadra 75 replacement gasser
ZDZ 90. Plenty of power and smoother than the DA. If you don't like TBM, AMR in Canada is a distributor.
Posted on: 3/29/2012 4:40 PM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11020350

RE: GP Giant Big Stik w/ O.S. 33GT!!
I can't believe you guys are using CA hinges on gassers. I've had them break on .40 size glow planes, different brand hinges no less. Gave up on them years ago. I got tired of having to replace them. Went to Robarts and haven't had a hinge failure since. Sorry for your loss, sucks losing a plane, but really sucks when it's one you really like.[:@]
Posted on: 3/24/2012 3:30 PM by Author "mrbigg" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11013406

RE: Large scratch build nearing completion
Looks good.
Posted on: 3/24/2012 3:23 PM by Author "mrbigg" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11013394

RE: Ceramic Coated Exhaust...
Here's an image link- [link]http://images.search.yahoo.com/search/images;_ylt=AgiCAW6sCAwk0EBPSLVXVyCbvZx4?p=coated+pistons&toggle=1&cop=mss&ei=UTF-8&fr=yfp-t-521[/link]
Posted on: 3/23/2012 5:18 AM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11011670

RE: Ceramic Coated Exhaust...
Didn't say I believed them Pe, just what they claimed. As far as coating on the sides of the pistons go, in the automotive world the coatings I've seen go from the botttom of the oil ring to the bottom of the skirt.
Posted on: 3/23/2012 5:13 AM by Author "mrbigg" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11011661