RE: MVVS 35cc Starting problems
Thanks for your reply. I have not checked the magnets. Will do so and if necessary change them. It would be the quickest remedial action.Will let you know. Regards
Posted on: 10/16/2011 6:49 AM by Author "mrpip" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10767674

RE: MVVS 35cc Starting problems
Thanks for your quick response re MVVS 35 starting problems. Yes I have checked for the spark but have not determined if its working consistantly and the problem has been consitant since new but not to its sevierety as now. Will check the spark strength again. Your thoughts of a new ignition purchase may be the best alternative. Will check out the cost. I have some hasitation with filing things on the engine. I am not an expert in these matters and am afraid to foul things up. Thanks again for your assistance though. Regards
Posted on: 10/16/2011 6:44 AM by Author "mrpip" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10767668

MVVS 35cc Starting problems
the problem? Tnx much mrpip
Posted on: 10/15/2011 3:19 PM by Author "mrpip" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10766921

RE: Johnson Mufflers Website ???
Thanks AZ for your info. This will set me on a new course to find appropriate replacements. I also thought rewelding to be a problem due previous oil contamination. Manfred PS: 3w engine runs very well ( 56B2-Twin) has lots of power and is easy to start) Comunicationg with 3W in Germany was very prompt and polite>
Posted on: 10/3/2008 7:24 PM by Author "mrpip" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8016357

RE: Johnson Mufflers Website ???
I am attempting to obtain support for replacing a pair of Johnson Mufflers for my 3W 56B2 twin. The ones I received from Cactus when I purchased the engine are terribly leaking around the alu welds.Cactus office advised Johnson Muffler are out of business. Does anyone know what replaces this muffler at about the same price and also effectively, including reliable quality control? Appreciate your thoughts. Thanks Manfred
Posted on: 10/2/2008 8:41 PM by Author "mrpip" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8013655

RE: NACA AIRSCOOP
THANKS BILL HAVE MADE A NOTE OF THE TITLE OF THE BOOK FOR PURCHASE.ME.
Posted on: 3/4/2008 2:48 PM by Author "mrpip" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=7173848

RE: NACA AIRSCOOP
THANKS DANNY03. WILL E-MAIL YOU. REGARDS ME.
Posted on: 3/4/2008 2:46 PM by Author "mrpip" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=7173841

NACA AIRSCOOP
GREETINGS FELLOW AIRCRAFT ENTHUSIASTS: HAVE BEEN TRYING TO SEARCH THE WEB FOR THE FORMULAR/AIRFOIL COORDINATES FOR THE NACA AIRSCOOP TO NO AVAIL. DOES ANYONE HAVE THE INFO FOR ME? MUCH OBLIGED WITH THANKS FOR ANY EFFORT. MRPIP
Posted on: 3/1/2008 1:06 AM by Author "mrpip" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=7159286

RE: mvvs 26 gas numbers?
Thanks very much Bill. Maybe someone else will read our interchange and can offer some suggestions. mrpip
Posted on: 3/24/2006 9:13 AM by Author "mrpip" in the forum "Tachometer Readings"
http://www.rcuniverse.com/forum/fb.asp?m=4076219

RE: mvvs 26 gas numbers?
Thanks Bill for your reply. My problem was not realy the mounting plate itself but the smallish female threaded bolt recepticals of the engine at rear. I fear that enlarging the thread here would agrivate the problem by reducing the strength of the mounting plate attachment area(sides of the crank housing).I am inclined to go with parallel motormount as the engine has the mounting lugs at its sides ans appear strong. Question here would be which of the available engine mounts would be best for a 4.1 hp engine?Would it be of advantage to have a vibration mounting system installed also.mrpip
Posted on: 3/23/2006 11:41 PM by Author "mrpip" in the forum "Tachometer Readings"
http://www.rcuniverse.com/forum/fb.asp?m=4075205

RE: mvvs 26 gas numbers?
would you recommend if any? Your opinion much appriciated. mrpip
Posted on: 3/23/2006 1:48 PM by Author "mrpip" in the forum "Tachometer Readings"
http://www.rcuniverse.com/forum/fb.asp?m=4072716

RE: Motor Mounts make me feel like a "Blind Nut"
I have just received a MVVS 35 ccm gaser with a backplate mounting disk. I find the disk and the short screw attachement a little week for mounting this engine and would expect a lot of vibration/swinging as a result. Can anyone suggest a paralell beam engine mount with good vibration damping arrangement. Much appriciated to receive your ideas. Greeting from mrpip
Posted on: 3/22/2006 10:07 AM by Author "mrpip" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=4067495

RE: AirHobbies 3.0 and RCS 44 twins
it now. Mrpip
Posted on: 2/14/2005 2:39 PM by Author "mrpip" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=2657629

RE: WEBRA BOXER 30-2 FT-Glow
Hello Alfredo, I have also been attempting to find out more about this Boxer but it appears little experience yet available. Have asked Webra to supply distributor name in North America. No reply yet.Horizon does not have them and could not find distributor in Canada. Does any one have an address of a distributor? Tnx for your reply. Mrpip
Posted on: 2/14/2005 2:19 PM by Author "mrpip" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=2657571

Webra Boxer 30 ccm
Does anyone have experience with the Webra 30 ccm Glow Boxer:Power, starting, fuel consumption quality? Thanks from MrPip
Posted on: 2/10/2005 3:06 PM by Author "mrpip" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=2642998