RE: Phoenix Model's Super Connie ARF
Here is a link I found to a place that sells the phoenix constellation for 3995.00 and a few pics i found of it. http://www.giantmodelproducts.com/index.php?main_page=product_info&cPath=41&products_id=297
Posted on: 7/9/2012 6:56 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11149402

RE: Multi engine wiring... how to?
I run all 8 speed controls on my spruce goose into the throttle channel using y conectors and and cut the power wire on the y conector at each speed control so i would not need to modify the speed control conector. I run the inboard 2 motors at the fuse on one 4s 5000 battery then the next 2 out on the next battery and so on, for a total of 4 batterys and 8 eflight 32 motors. the planes weight is 48 lbs and flies at 50 percent throttle except on take off. this way if you have a battery problem you will loose 2 motors in the same position on oppisite wings. i never use the bec on a speed control i have lost 2 planes in the past when the speed control got hot it shut down the radio also so i always run a on board flight battery and sometimes a redundant pair like the ones i set up in the spruce goose for back up protection. I just finished a quality glass c-130 also but it has not been flown yet, it has os glo engines in it here is a pic. of it and the goose. hope this helps. jim
Posted on: 6/8/2012 12:49 AM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11110904

RE: c-130 hercules
I added a second coat of clear on the air frame and let it dry for a few days then added the on board glo system and tuned the engines a couple of days later. then balanced the plane its at 24 lbs all finished up. jim
Posted on: 6/6/2012 6:30 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11109414

RE: KMP OV-10 build
Here are a few pics of my kmp ov-10. it was one of the original kmp kits that I recovered to match our ov-10 # 310 fire spotter we have here in hemet. It has 2 g23's and landing gear I made and drops 6 parachuters out. The weight is at 28.5 lbs and has over 30 flights on it know. flys like a big trainer.
Posted on: 5/20/2012 2:07 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11087906

RE: c-130 hercules
Finished up the engines and control surfaces this weekend here are some pics outside. 21.5 lbs so far.
Posted on: 5/20/2012 1:20 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11087860

RE: c-130 hercules
I added the panel lines yesterday and the clear coat on the fuse today. next will be final assembly. here are some pics. I just added a asm c-130 arf kit in the scale gas and glow aera if anyone is interested. asm c-130 kit sold. jim
Posted on: 5/17/2012 6:55 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11083845

RE: c-130 hercules
Its a kit for a builder. glass parts have a few pin holes , not too bad. foam wing cores and plans are very nice. you need to supply your own wood . I have a second kit with retracts for sale in the scale military ads aera. if your interested. here are a couple pics of it. jim sold
Posted on: 5/16/2012 7:42 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11064742

RE: c-130 hercules
Here are a few more pictures. I painted the blue on today and added the decals this evening. panel lines will be next then clear coat. nice c-130 jerry, you must be quite the hercules fan to keep 3 going at one time. jim
Posted on: 5/8/2012 10:31 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11073805

RE: c-130 hercules
The company I used for the decals was http://cal-grafx.com/ tne asm c-130 is the same wingspan as my c-130 so if you would like I can pm you the order number. let me know. jim
Posted on: 5/8/2012 7:19 AM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11072861

RE: c-130 hercules
I will check on the company who made the decals for me and try to let you know tomorrow. I need to find the paper work for them first. The company who makes the kit is http://www.qualityfiberglass.net/ and this is a c-130 hercules kit. I did the yellow stripe on the fuse today. next will be the blue on the bottom then panel lines and stickers and last clear coat. lots of steps on the fuse. jim
Posted on: 5/7/2012 11:43 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11072588

RE: c-130 hercules
I seen your c-130 at the show it looks very nice hope it flys well. I am starting the paint work on my fuse now. has lots of steps to complete for fat albert. here are a couple of pics. I have the wings painted and all the small parts. happy landings. jim
Posted on: 5/6/2012 5:56 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11070799

RE: c-130 hercules
I have os 46 engines on it. I had them already. It will fly on 25 and up sizes. the larger engines will swing scale size props for this size model also.
Posted on: 5/2/2012 6:11 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11066080

c-130 hercules
I have been working on a c-130 for a few months now so i thought I would put a few pics of it on rcu. Its a quality fiberglass kit it comes as a fiberglass fuse and engine nacells and foam core wings. 102" span and 75" length. It will be done in blue angels fat albert. looks like at this time it will come in around 22 lbs. happy landings all. jim
Posted on: 4/30/2012 6:41 PM by Author "multienjim" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11063354

RE: PayPal deposit not show in my account
I have the same problem deposited 25.00 on june 23 that never made it to my market account I have sent messages to the moderator and this person elizabeth.goodman pay pal said the money went to and started a new thread in the market place problems aera all have went unanswered. I started a dispute on pay pal today to try and get the money in my market account where it belongs or returned to my pay pal account. I will repost when I hear somthing. jim.
Posted on: 7/12/2011 6:44 PM by Author "multienjim" in the forum "MarketPlace questions or problem?"
http://www.rcuniverse.com/forum/fb.asp?m=10618601

pay pal payment to my account
I deposited 25$ to my account to boost my add and pay pal said they paid rc universe the money and its not in my account to use, any idea where it is. jim
Posted on: 6/30/2011 8:00 PM by Author "multienjim" in the forum "MarketPlace questions or problem?"
http://www.rcuniverse.com/forum/fb.asp?m=10600706

RE: howard dga 40% scratch build
Should be around 60 to 75lbs not sure at this time. cant wait to see it fly too. I got nothing done on the dga this weekend i had to change over 4 planes to 2.4 this weekend and test fly them. jim
Posted on: 3/7/2011 1:01 AM by Author "multienjim" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10383799

RE: howard dga 40% scratch build
I have a 12ft box trailer i use to transport my large models. It has a 3w 150 on it now i may go to a 3w 210 or 275 if i need more nose weight.
Posted on: 3/4/2011 11:53 PM by Author "multienjim" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10379855

howard dga 40% scratch build
Here are a few pics of my latest project, It has a span of 182 inches and I plan on runway and float flying it. I will post more pics as i go. happy landings all. jim
Posted on: 3/4/2011 5:07 PM by Author "multienjim" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10379340

RE: C-17 from easy tiger
I have one from hobby shop warehouse that I paid 249 for on the p+p and it took 2 weeks to show up. It flys very nice and has great power, mine is on a 4s 5000, I did replace the servos in mine before flying it, a few others said they had servo failure, better safe than sorry I figure. Here are a few pics of the flight. I droped 12 paratroopers on the last flight . Happy landings all JIM. this is the link to the video of the maiden flight http://www.youtube.com/watch?v=GehzrjpG2J4
Posted on: 12/16/2010 8:02 PM by Author "multienjim" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10201703

RE: Der Jager 1/3 scale
It is my own design. its hard to locate any pics of real der jagers to choose a paint job you like. I will tell pat you said hi.
Posted on: 12/16/2010 6:14 PM by Author "multienjim" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10201638

RE: Der Jager 1/3 scale
A few pics of my der yager. It is a balsa usa kit also. happy landings all JIM.
Posted on: 12/14/2010 10:25 PM by Author "multienjim" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10197999

RE: EasyTiger
My floats from easy tiger made it here friday 10-29 -10 and look like they are very nice quality. 56" long for any one who needs a set that big and have rivets molded in also and all hardware included and painted silver. only problem was the 3 month wait when i was told 10 days,still they were worth the wait if your not in a hurry for the 259 dollar price. happy landings all jim.
Posted on: 11/2/2010 8:38 PM by Author "multienjim" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10111935

RE: EasyTiger
I just got a tracking number on my floats from easy tiger models on 10-25-2010, it turns out when I ck on usps web sight my floats just left china on 10-23-2010 4 days ago 3 month's after my order was paid for. I will re post if they show up. jim
Posted on: 10/27/2010 10:09 PM by Author "multienjim" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10096990

RE: EasyTiger
I have also ordered from easy tiger models a set floats three months ago and paid over 300 dollars and was told 7-10 days. I still have no floats. they took 3 weeks to even ship them the first time and claim they must have got lost after another month so they said they sent out a set again now 3 weeks later they are still not here and are making excuses and are giving us a hard time also. my 1st and last order from easy tiger models. BEWARE
Posted on: 10/25/2010 10:10 PM by Author "multienjim" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10094288

RE: The Spruce Goose Fly's at Lake Hemet
Hi Mike our main field is out close to domenigony pky. Ck the hemet model masters web page for the map and the calender for the year we have 2 float flys on the calender this year the first in april. Jim.
Posted on: 1/21/2010 10:08 PM by Author "multienjim" in the forum "Seaplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9436726

RE: The Spruce Goose Fly's at Lake Hemet
Thanks laddie Good luck on your new build. Happy landings. Jim
Posted on: 1/21/2010 10:00 PM by Author "multienjim" in the forum "Seaplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9436707

RE: Best scale photo!
Mr crashmaster I posted the pics in fact due to modelers who have seen the pics in person commenting that it looks real in the photos, Had howards h-4 had a real flight would have been nice but it did not and thats just the way it is. I do not care what you think anyway its just a post with pics for fun.On the other hand I think its you who did not understand the intent of the thread as I noticed you bashing other people for various reasons and tracking back your last 25 posts on this thread not a 1 of them included a photo of a plane scale or not. The thread was to post scale looking photos. my h-4 hercules was scale enough to finish first place two weeks ago in scale civilian at the ama convention in ontario ca. so if you dont like the pics fine by me.
Posted on: 1/21/2010 9:32 PM by Author "multienjim" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9436640

RE: Best scale photo!
My hughes h-4 hercules aka spruce goose. Happy landings. Jim
Posted on: 1/21/2010 8:56 PM by Author "multienjim" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9434402

RE: The Spruce Goose Fly's at Lake Hemet
Hi everyone I took the h-4 to the ama convention in ontario ca and it finished in first place for static in scale civilian. happy landings Jim.
Posted on: 1/20/2010 10:36 PM by Author "multienjim" in the forum "Seaplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9433958

RE: The Spruce Goose Fly's at Lake Hemet
More pics I just got from the lake perris float fly, happy landings. Jim
Posted on: 11/19/2009 2:44 AM by Author "multienjim" in the forum "Seaplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9264516