RE: To all who recomended the 4*120 for my DLE20
the 17 x 8 xoar is perfect for the dle-20, I have one in a 13 1/2 lb cub and it pulls vertical just fine.
Posted on: 8/25/2012 10:50 AM by Author "nalby" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11205591

RE: What Aircraft are you installing your DLE20
Hi Bob, since I didn't put the vertical stab in yet and I have the holes for the servo's do you think I could put tail reinforcement on the inside of the fuse? Also did you do any reinforcements to the firewall? Thanks Jim
Posted on: 8/16/2012 5:54 AM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11195577

RE: What Aircraft are you installing your DLE20
Wow thanks, I've already done some of the mods, but your reply is like a build log to me, I can't tell you how much it's helped, Thanks Again and Happy Flying Jim
Posted on: 8/15/2012 10:44 AM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11194484

RE: What Aircraft are you installing your DLE20
Hi Bob I'm in the process of building the same plane. Did you have to make any mods? I already moved the servo's to the back. Any other tips would help alot. Thanks Jim [quote]ORIGINAL: Bob Paris Big Stick .60~.90, with larger landing gear from the Big Stick gas ARF and DuBro scale tail wheel assy. Bob [/quote]
Posted on: 8/14/2012 4:25 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11193588

RE: Profile Plans
...
Posted on: 8/10/2012 9:43 AM by Author "nalby" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=11188240

RE: New DLE 35
I should be getting mine this week. I'm planning on putting it on a Bill Hemple 1/4 Clipped wing cub. What size prop should I use? I was thinking xoar 19x8 any thoughts. Thanks Jim
Posted on: 7/23/2012 8:52 AM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11165755

RE: CMPro Piper J-3 Cub 120 91
I an building this cub and trying to put a dle20 in it are there any mods I have to do to make it fit? Also is the fuel tank ok for gas. thanks Jim
Posted on: 5/26/2012 3:45 PM by Author "nalby" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11054917

RE: Post your favorite quotes
A nose heavy plane flys poorly, A tail heavy plane flys once. If you can't dazzle them with brilliance, baffle them with bull.
Posted on: 5/25/2012 7:46 AM by Author "nalby" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=11094166

RE: CMPro Piper J-3 Cub 120 91
Here's some pics of the dle-20 I did use a fortitude 16oz tank but you can use the stock tank, you just have to move it back a little.
Posted on: 5/25/2012 4:50 AM by Author "nalby" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11094128

RE: What Aircraft are you installing your DLE20
Thanks the linkage in the pic is for the choke there is a nob in the cabin
Posted on: 5/21/2012 5:01 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11089462

RE: What Aircraft are you installing your DLE20
It has a 91" wingspan so it's somewhere between 1/4 and 1/5 scale.
Posted on: 5/21/2012 2:11 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11089244

RE: dle 20 choke
I put in a bellcrank on my 91" cub dle-20 this way I control it from inside the door
Posted on: 5/21/2012 7:06 AM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11088693

RE: What Aircraft are you installing your DLE20
[quote]ORIGINAL: boostoman nalby plane looks really good. btw how powerful is the plane. does it do verticals? [/quote] [quote]Is that the Cub that Nitro Planes sells? AV8TOR[/quote] Since the engine is new I really haven't pushed it yet, but I have done some 3/4 throttle loops and it had no problems and the cub is a little heavy with the dubro 6" inflatables and 16 oz of fuel it comes
Posted on: 5/21/2012 6:45 AM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11088653

RE: CMPro Piper J-3 Cub 120 91
Yes it works great. the temp was 210 at the hottest spot on the engine right after landing. The guys at the field said that was good. outside temp that day was 75
Posted on: 5/19/2012 9:32 AM by Author "nalby" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11086795

RE: CMPro Piper J-3 Cub 120 91
Here's mine with a dle-20. Had to open up the cowl for air, I also put the dubro 6" inflatables on it they work great on grass and look really cool.
Posted on: 5/19/2012 8:04 AM by Author "nalby" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11086723

RE: What Aircraft are you installing your DLE20
Installed a DLE-20 in a CMPro 120 Cub have 4 flights on it now. just love this motor plenty of power and uses hardly any fuel, if I had to guess I used about 3-4 oz for a 10 min flight and it's still new so maybe a tad rich. I did have to open up the cowl for more air but I don't think it looks bad.
Posted on: 5/19/2012 8:02 AM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11086720

RE: ***CUB BROTHERHOOD***
Here's my cmp cub it's a 120 size, I'm running a dle-20
Posted on: 5/19/2012 4:03 AM by Author "nalby" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11086537

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
[quote]ORIGINAL: nalby Ok flew the cub with the new air holes. flew 2, 10 min flights, after the first flight I hit the head with a infrared themometer highest was 210. Does that sound like a good temp? The engine ran good, nice throttle response a little rough at just under 1/2 throttle but I have read that it will smooth out as the engine breaks in. I had it idleing at 1800 and the high
Posted on: 5/18/2012 4:09 AM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11085432

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Yes but it is more like 5 seconds on my engine.
Posted on: 5/17/2012 4:51 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11084930

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
[quote]ORIGINAL: Brian Smith Without searching thru this whole thread just thought I would ask. Does anyone know if the new DLE 20s are still being shipped with the #4 ignition box like I have in my original versions? Thanks Brian Smith [/quote] Mine came from tbm about two weeks ago and it has a # 4
Posted on: 5/17/2012 2:11 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11084733

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Ok flew the cub with the new air holes. flew 2, 10 min flights, after the first flight I hit the head with a infrared themometer highest was 210. Does that sound like a good temp? The engine ran good, nice throttle response a little rough at just under 1/2 throttle but I have read that it will smooth out as the engine breaks in. I had it idleing at 1800 and the high was just under 8000, i'm using the tbm little muffler and it states I would lose 3-400 rpm so I think i'm good now. Any thoughts? Thanks Jim
Posted on: 5/17/2012 1:12 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11084669

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Ok I opened it up some more.
Posted on: 5/16/2012 6:11 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11083689

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
[image]http://nalby.smugmug.com/Other/misc/i-q2xN7Vd/2/S/C3602012-05-16-19-05-12-S.jpg[/image] [image]http://nalby.smugmug.com/Other/misc/i-MGf5rDh/2/S/C3602012-05-16-19-04-25-S.jpg[/image]
Posted on: 5/16/2012 5:10 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11083614

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
[image]http://nalby.smugmug.com/Other/misc/i-6FfkQ5q/1/S/C3602012-05-16-19-03-43-S.jpg[/image] [image]http://nalby.smugmug.com/Other/misc/i-rjSJQ3K/1/S/cub-new-S.jpg[/image]
Posted on: 5/16/2012 5:07 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11083610

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Ok the cub is a cmp 120 91" here are some pics I cut the cowl and I hope this will give enough air. What do you think? I colored in the one pic back to a before. Sorry it won't let me upload pics
Posted on: 5/16/2012 4:56 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11083549

RE: NEW DLE 20cc Gasser! (Data & Links 1st Post)
Question for all you dle-20 pro's. I just finished building a 120 size cub, I put a dle-20 with a xoar 17x6. Followed the info on this thread about breaking-in I have 1800 on idle i'm getting 7600 on the high. I maidened it on monday ( with the cowl off ) and I though it flew great. Today I put the cowl on and on the ground it was the same as the maiden flight but in the air it was not as smooth and then I had a dead stick. Landed ok but the motor was really hot. The only vents are 2 holes in the front typical cub holes and about a 1/4 gap at the bottom of the cowl, Do you think that is enough air? or does it sound like the engine might be to lean. Ant thoughts would be a great help. Thanks Jim
Posted on: 5/16/2012 3:20 PM by Author "nalby" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11083461

RE: ***CUB BROTHERHOOD***
Hi maybe you can add me to the awesome cub list. I have a cmp L4 with a monster 32, I get about 12 min on a 4s 3600 & 12 x 8 prop. It also has the hanger 9 gear. Currently I am building a CMPro 91" cub that i'm trying to squeeze a dle-20 in, should be a great flying plane. [image]http://nalby.smugmug.com/Other/misc/i-MMM8BSZ/0/XL/2011-07-0517-27-1612-XL.jpg[/image]
Posted on: 5/3/2012 8:26 AM by Author "nalby" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11066790