RE: Grumman TF-1 / C1A
. What is the Squadron signal catalog number? nav-air
Posted on: 6/22/2012 6:25 AM by Author "nav-air" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11127562

RE: Grumman TF-1 / C1A
and weight? I would love to see what you have since I too use AutoCad 2000. Nav-Air http://www.carlb
Posted on: 6/21/2012 6:52 AM by Author "nav-air" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11126406

RE: Grumman TF-1 / C1A
High firebar from Warrenton, I was a former resident of Hatboro in the 60's and 70's.I am thinking of something about 105 inch wing span or 1/7th, 1/8th scale, it would really depend on the engine size's.what are the particulars of your drawins and are they on CAD? nav-air
Posted on: 6/19/2012 7:35 AM by Author "nav-air" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11123666

RE: Grumman TF-1 / C1A
The two a/c are similar in overall appearance except for the wing span,cargo rack storage and the fuselage on the tf-1 was deepened and this the area of the unknown. nav-air
Posted on: 6/19/2012 7:27 AM by Author "nav-air" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11123653

RE: Grumman TF-1 / C1A
Thanks for your response, yes as a matter of fact I been in contact with them however the drawings they have are S2F which the TF-1 was developed however they do not have drawings that were modified to build the TF.
Posted on: 6/18/2012 8:47 AM by Author "nav-air" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11122360

Grumman TF-1 / C1A
Grumman "Trader" TF-1/ C1A,...I am searching for plans, 3 views with formers for this aircraft. Nav-Air
Posted on: 6/18/2012 7:53 AM by Author "nav-air" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11122299

G38 prop. mounting bolt and hub thread
I have the alum. prop. hub that superceded the orignal steel hub on the Zenoah G38, does anyone know what the thread size and pitch is?I beleive it to be M8x1.25, but need confirmation.
Posted on: 3/26/2012 3:43 PM by Author "nav-air" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11016108

RE: Zenoah G 38
RC, forget my last message, payment is in the mail for the new G38 muffler and hub. nav-air
Posted on: 3/12/2012 7:32 AM by Author "nav-air" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10996811

RE: Zenoah G 38
Antique, send me a pm inresponse for my question and my address and e-mail address nav-air
Posted on: 3/12/2012 6:47 AM by Author "nav-air" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10996732

RE: Zenoah G 38
Antique, what is abd and I understand you have the orignal muffler and the new prop hub for $25, does this include the hub retaining nut and how do you prefer the payment nav-air
Posted on: 3/12/2012 6:17 AM by Author "nav-air" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10996699

Zenoah G 38
I am looking for a used( in good condition) original muffler or a new original or after market muffler and the new generation prop hub for the G 38 engine.
Posted on: 3/11/2012 7:38 AM by Author "nav-air" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10995266

RE: Zenoah G 38
Thanks again for the heads up
Posted on: 2/29/2012 6:54 AM by Author "nav-air" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10981280

RE: Zenoah G 38
wy8e thanks for confirming my thought. Nav-air
Posted on: 2/28/2012 11:12 AM by Author "nav-air" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10980175

Zenoah G 38
I am in the process of assembling this engine and need clarification as to the piston ring position relative to the gap/pin when installed in the cylinder, I think the top of the piston has an arrow on top. Thanks for your help
Posted on: 2/28/2012 6:14 AM by Author "nav-air" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10979762

DLE 30 engine timing
I need confirmation for the DLE 30 ignition timing, the hobbico manual page 13 has the timing set at 46 Degrees BTDC, any comments appreciated. Thanks.
Posted on: 4/18/2011 7:26 AM by Author "nav-air" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10469552

RE: S-3 Viking Plans
Thanks Hawker1, but found no photos or plans. No gallery found was the statement!! nav-air
Posted on: 3/12/2011 6:54 AM by Author "nav-air" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10395101

S3B Viking
Does anyone know the source for Lockheed's S3B Viking model plans or good 3 Views?
Posted on: 3/11/2011 7:38 AM by Author "nav-air" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10393085

Mini pro 480 fan
Need help installing the 480 fan adapter to an Het 2w20 motor ie; how much clearance should be provided between the fan adapter to motor case to prevent contact also prevent the back side of fan contacting the motor support area inside fan shroud,and any other advice will be appreciated.
Posted on: 3/11/2011 6:43 AM by Author "nav-air" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10392969

mounting 28mm motor to 29mm fan housing
What is the best method to displace the difference of a 28mm motor o.d. to a 29mm i.d dimension of the mini 480 fan unit while allowing maximun cooling of the motor. nav-air
Posted on: 2/13/2011 6:32 AM by Author "nav-air" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10332504

shulman fury fan foe 4s battery
Anyone know the o.d.dimensions and will it fit in the ziroli e-tubinator, I know that shulman has the plane for this fan however I think it comes from off shore and there may be some dimensional differences ??
Posted on: 12/27/2010 8:34 AM by Author "nav-air" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10220625

7c 2.4 flaps
How do I program 3 flap positions i.e. full up, mid. position and full down about 45 degrees with switch "G" without any elevator movement?
Posted on: 12/13/2010 7:07 AM by Author "nav-air" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=10194054

RE: How to convert an ATX power supply to rc use
Andrew, I need help!, Ihave two PS'S that I converted without success; #1 is a dell 1996-2000 era 12v, 200w, set up: Load=(5v)red and black to 10 ohm 10w resistor,(12v) yellow to recept., black to recpt., grey wired to black.there appears to be know "sense" wires ie; all single pin wires from the mobo connector.Battery connected to charger, charger connected to PS then PS connected to ac, result a fan bump and nothing else, no voltage. I have checked for shorts at banana plugs, foriegn matter on circuit board and no burn't odor. # 2 PS is a compaq 250 watt.set up:pin 11, org and brn. wired together, pin 14 grn. to black,red and black wired to 10 ohm, 10 w resistor, ps connected to battery and charger as stated above. fan runs albeit a little slow I think but the resistor gets so hot in a matter of seconds that it cnnot be touched, then tried 4 one ohm resistors with the same results. Thanks
Posted on: 12/9/2009 11:02 AM by Author "nav-air" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9316321

RE: Byron corsair
High, this enquirey is for a friend that has aquired a Byron 85in. w.s. corsair and he is trying to determine the c.g. location. Thanks Bill Lester
Posted on: 3/2/2005 9:36 AM by Author "nav-air" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=2717845

RE: Fuselage Lofting Programs
High, I am interested in obtaining the lofting and conical program if you don't mind. I have autocad 2000 running on a dell 450, windows 98. thanks Billy Lester blester@chartertn.net
Posted on: 10/24/2004 4:58 PM by Author "nav-air" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=2283420