RE: Rolling Chassie
what am i looking for though...
Posted on: 11/7/2004 3:57 PM by Author "neap38" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=2324737

Rolling Chassie
Hi all, I have a g23lh engine with a 27cc bbk, 14mm walbro carb, helimuffler and a rocket key. I want to put this engine onto a rolling chassie but im not sure where to look for one and what one would be the best for my needs. I want a half decent touring car with a low price range. It has to be a suitable for a noob with little knoledge about these cars but with a lot of knowledge with the smaller 1/10th cars. Could anyone give me some ideas on what to look for and where to look for it? Thanks a bunch for your help [sm=wink.gif]
Posted on: 11/7/2004 1:39 PM by Author "neap38" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=2324493

RE: Large Scale for Begginer
Thanks, not really a very wide selection on at the moment. Probably be best to look after christmas:P Can anyone recommend me a touring car ? Thanks again for your help.
Posted on: 11/7/2004 8:52 AM by Author "neap38" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=2323984

RE: Large Scale for Begginer
Thanks for your replys:) what keywords should i use for ebay? Thanks for your help.
Posted on: 11/7/2004 7:05 AM by Author "neap38" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=2323872

Large Scale for Begginer
. Thanks alot for your help neap38
Posted on: 11/7/2004 5:59 AM by Author "neap38" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=2323821

RE: Tuning your car
The needle in the brass casing = 3 1/2 turns out from screwed right in Other needle = flush with plastic casing around it Idle = 1mm gap
Posted on: 8/14/2004 2:38 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=2084760

RE: HELP!!! CAR ONLY MOVES 2CM FORWARDDD
Hmmmm, im guessing you have been looking at the clutch and taken it off? And you hve put it back on the wrong way round.
Posted on: 7/2/2004 3:04 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1955557

RE: eblown engines?
Does it have compression? Can you pull the pull start? Does it start? If no to any of these questions then most probably your engine is bust.
Posted on: 7/2/2004 1:52 PM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1955407

RE: cen genesis?
CEN = Brilliant Recommended
Posted on: 7/2/2004 1:48 PM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1955394

RE: Exhaust spitting petrol
That "fuel" coming out of your exaust is oil from your fuel. Leave it as it is. You should always have oil spitting out of your exhaust other wise you will be running your car to lean. And too lean means a busted engine :)
Posted on: 7/2/2004 1:46 PM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1955387

RE: NTC3 Is It Loud?
Ok great ^^^ M8y... just try it, if you get any complaints go somewhere else untill you get moved.
Posted on: 7/2/2004 1:43 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1955375

RE: NTC3 Is It Loud?
"!!All nitro cars are loud, theres no way around it, just have fun and don't worry about the noise!!!" No actually your wrong. You can buy silencers for your car if your willing to sacrifice a little bit of power. Also i think maybe your going a little over the top when you say you could easily hear it form inside a house from the street. Maybe if you didn't have double glazing you might be able to just about hear it but the people most likely to moan are old people who are deaf anyway.
Posted on: 7/2/2004 1:39 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1955366

RE: what car
A R40 is designed for racing, you wouldnt be able to use it anywhere else apart from a prepared race track with out damaging the car. Also the car is made for experts not people new to nitro touring. I would recommend the ntc3 rtr as as the ntc3 is one of the best cars you can buy.
Posted on: 6/23/2004 4:30 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1929169

RE: could u put nos in rc cars
Okay, I think i can say this for everyone when i say that we are all sick of these superchargers and NOS topics. USE THE SEARCH BUTTON. There has been hundreds of these topics posted.
Posted on: 6/23/2004 4:27 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1929148

RE: hellp sorry for posting againn
.... Its sounds like your engine is in a position where the second gear on the clutch bell isnt touching the second gear on the car. )or isnt touching it anoth). This means that when you give the car light throttle the car will stay in gear one, but when u give it full throttel your shearing the second gear so its only moving a little. Try setting the engine again and see if it solves the problem.
Posted on: 6/20/2004 6:52 AM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1918427

RE: Is this compatable?
RcSuCkA If it does actualy fit (which i doubt) there would be alot of problems with it. You would find your self with air leaks and tuning problems. Like sixtoes1313 why not just try it? You will never learn if you dont experiement.
Posted on: 6/18/2004 5:40 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1914851

RE: UH-OH WAT HAPPENED?!??!
Ill bet all my money on that your conection rod has snaped. Dont force the pull start you will screw up yuour engine even more.
Posted on: 5/24/2004 10:47 AM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1841335

RE: Forum Moderators?
I haven't seen nitro addict around for a long time. Where's he gone? He used to be in every post almost.[:o]
Posted on: 5/18/2004 11:07 AM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1824950

RE: Does the Cen CT4S Suck????
lol.. that forum sounds like its run by 8 year olds. The Cen sucks is all you here [&:] CENS are good cars I have one my self and have next to no problem with.
Posted on: 5/17/2004 10:35 AM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1821336

RE: MY SERVOS DO WHAT EVER THEY WANT
Check all the wires on your car and check for damaged wires with out the insulation around it. If you find one wrap it in insulaion tape. I had the same problem with you becuase the battery pack wires had been dmaged and was touching the metal chassis causing all the servo's to glitch.
Posted on: 5/16/2004 5:23 AM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1818496

RE: realy hard to turn the flywheel......
A new engine should be hard to push when the piston is at the top. It will be rubbing against the piston liner alot so that when your running your engine for the 1st few tanks it will wear away the excess material on the piston liner (which is making it hard to spin the flywheel) so that there is a better air seal between the piston and piston liner. Also try loosening your glow plug a little bit so there is less compression and then try to start up the engine. When the engine is running tighten the glowplug up again. Hope this helps.
Posted on: 5/15/2004 5:08 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1817323

RE: Which is better: Yokomo Gt-4 RTRII or the CEN CT4S
Cens are good cars. I would buy the car which your hobby shop has spears for other wise your make the same mistake as i did with my 1st car and having to wait 6 moths each time a sheared a gear.
Posted on: 5/3/2004 3:53 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1782516

RE: hPi SpriNt......
Lol how long do you reckon its going to take for this post to be shut down?
Posted on: 5/3/2004 3:48 PM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1782494

RE: Rubish Tool Head Fell Off
You could try using a paper clip to try and get under it and pull it out
Posted on: 5/3/2004 5:57 AM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1781173

RE: What car do you have and how fast does it go?
How fast do you reckon a Factory Team TC3 with a sirio standard 12 Engine woul go with the stock gearing?
Posted on: 5/2/2004 5:02 PM by Author "neap38" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=1779608

RE: More problems
Dkd he just said that the engine still ahd compression and to know that the flywheel would be able to move so he can see if there is any compression or not.
Posted on: 5/2/2004 4:18 PM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1779505

RE: More problems
Well maybe the engine was oer reved and stalled itself.
Posted on: 5/2/2004 2:50 PM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1779340

RE: Beginners Forum
Plane Insane why dont you give it a trial and see how it works out? no one will ever know if it will be a hit or not by a vote:)
Posted on: 5/1/2004 6:07 PM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1777242

RE: whats the stupidest thing.........
apology accepted[:D] I was trying to get my car started and a couple of young children gaverd round. My car wouldnt start because i fogot to charge up the glow start. I knocked the steering stick and the front wheels moved. They thought the car had started. Pretty crap story:P [sm=tired.gif][sm=tired.gif][sm=tired.gif][sm=tired.gif][sm=tired.gif][sm=tired.gif]
Posted on: 5/1/2004 6:04 PM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1777234

RE: Pull start problems (arrghhhh)
Take your pull start off and clean your one way bearing in degreaser or something over night. It will sove your problem.
Posted on: 5/1/2004 5:57 PM by Author "neap38" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1777225