RE: 46 and 60 Extra 260 Freestyle! VIDEO ADDED!!
I want to see those hands off KE figure eights. Have your toothless neighbor lady take the video. She seems interested.
Posted on: 9/22/2010 10:02 AM by Author "nitrofevr" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10019437

RE: O.S FS120S-E for a 3D airplane?
Scale and 3D dont mix.
Posted on: 7/31/2010 1:39 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9901299

RE: vintage inferno
I might use my turbo burns instead......
Posted on: 4/14/2010 8:41 AM by Author "nitrofevr" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9660084

RE: vintage inferno
Saito 56 is what I was thinking about. This car would be the testing bed for my set up.
Posted on: 4/14/2010 8:38 AM by Author "nitrofevr" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9660076

vintage inferno
I have an old inferno that I was about to cut it up to put a 4 stroke in but then realized that someone might want a vintage car and would hate to see me chop it up. Is cutting this car a bad idea?
Posted on: 4/13/2010 4:56 PM by Author "nitrofevr" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9658481

RE: new profile desing
What the fook is that big square in the fuse about?
Posted on: 10/29/2009 5:01 PM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9212949

RE: 3D'n with Ski's
going to put some on my yak as soon as theres enough snow
Posted on: 10/29/2009 4:57 PM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9212932

RE: Saito 100 as powerful as a Saito 125?
sounds like you have something going on with the 125
Posted on: 9/30/2009 9:09 AM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9135446

RE: 3D TRAINER - PROFILE???
mojo moass 60, saito 100. awesome trainer and also awesome for the experts. You cant loose with this plane. Its kit only but you can get the removable wing option.
Posted on: 9/29/2009 1:32 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9133232

RE: The Tango 40 ARF from Hangar 9
its a box fuse that I scratched and I bashed some Chin Yak tail feathers on it. The fuse is built much like the ferroplane with some minor differences. It was mentioned in the hood on a build thread that Wild Fred started
Posted on: 8/24/2009 10:35 AM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9040198

RE: The Tango 40 ARF from Hangar 9
This is absolutely the best thing that i have ever done to improve my tango! http://www.youtube.com/watch?v=JZXBcZOtBDs
Posted on: 8/24/2009 8:34 AM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9039958

stickit V
Does anyone have any experience with making a stickit V lighter? If anyone could help that would be nice, thanks
Posted on: 8/22/2009 5:25 PM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9036176

RE: Best Plane for 3d with Evolution 1.00nx engine...??
i would go straight for a profile. Easy to fix, really tough, flies superb, they can take so much beating that a full fuse plane cant touch.
Posted on: 8/12/2009 6:42 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9011470

RE: Profile fuse AJ Extra wings
thats what i thought
Posted on: 8/11/2009 11:49 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9009377

RE: Best Plane for 3d with Evolution 1.00nx engine...??
come to the dark side[:D]
Posted on: 8/11/2009 9:48 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9008996

Profile fuse AJ Extra wings
I Scratched a fuse to go with my extra set of Andrew Jesky wings. Here are some pics
Posted on: 8/11/2009 8:37 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9008803

RE: Best Plane for 3d with Evolution 1.00nx engine...??
primo 60, www.swanyshouse.com
Posted on: 8/6/2009 11:27 AM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8994765

RE: os.55ax 3d plane ?
omp yak or edge, swanyshouse Mojo 40 or Primo 40, EF Chinn Yak, value hobbies Sabre 47. For real 40 size 3d i would stay away from the ucantdo or pretty much any other full fuse birds. They have to high of wing loading to fly well and they are pretty much one dumb thumbs away from bringing it home in a trash bag. Alot of ppl cant get over the looks of profiles but i know im flying for fun and i dont thing it gets any better than a good slab.
Posted on: 7/19/2009 8:52 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8947166

RE: Engine for 3D: 4stroke or 2stroke
It isnt about better or worse it is all about what kind of feal you like. As mentioned a 4 stroke will swing a bigger stick at lower rpms which will blow air over more of the controles. A 2 stroke will swing a smaller stick with more rpms. This will give you less control coverage but more air speed over where it does hit. These make a difference in the feal. The way they deliver torque and hourse power also has an effect on the feal. These variables have a lot to do with how the plane flies, maybe no better or worse just different. it is up to you to decide how you like it. If you fly around in circles upright all day it matters to a certant extent how you mount any engine its just whats the cost and benefit. With the oriantation of the engine and 3d i dont think it matters just as long as you counter balance for it. You will be up side down, knife edge, vertical, and who knows what else. You need an engine that runs very reliable first and foremost. When your doing slow rollers head level you need to know it will be there for you. With that you also need to mount your tank and run your lines in such way that it doesnt favor any paticular attitude. It is all about symmetry. Just my .02 and sorry about the spelling.
Posted on: 7/19/2009 8:37 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8947122

RE: 3D Biplane for YS 63S?
if you can find some one with a boxxer kit or arf its one of the best.
Posted on: 6/30/2009 5:53 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8895556

RE: somthing for the saito 125a
Primo 60 baby!!!!! http://www.youtube.com/watch?v=DhBwrml558Y
Posted on: 6/30/2009 5:46 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8895531

pizza hut pbf
http://www.youtube.com/watch?v=BuW8GD_i9Pw here is my pbf made out of a medium pizza hut box. I have a park 300 and an 800 mah 2 cell with hs 55s. it is a really good material and the hinges are pre-made with the lid flap duber.
Posted on: 6/6/2009 9:16 PM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8831264

RE: Problems with hovering
[quote]ORIGINAL: daveopam Good point nitrofevr. That is why I take a cut off wheel in a Dremmel and make a groove in the back of every clunk. Some come with a groove but a lot of them dont. David [/quote] Im going to have to steal that idea from you.
Posted on: 5/8/2009 7:49 AM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8750830

RE: Problems with hovering
i had a problem like this and what i found was the clunk tubing was just the right length to suction the clunk to the back of the tank leaning it out, i shortend it by a few mm and it stoped leaning out.
Posted on: 5/6/2009 10:15 PM by Author "nitrofevr" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8747026

RE: Frankinstien
I am using L.A.R. I didnt draw up anyting i just started cuting. Didnt see any need to over think this bird and it seems to be comming together really well. I used just my eye and i got the insidence within .15 degrees from 0. I installed the motor mount and both wing mount plates. Im now looking at where im going to mount the tail servos. It seems like its going to tend to be tail heavy but i still want to mount them in the tail.
Posted on: 5/5/2009 11:50 PM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8744523

RE: Frankinstien
whacha got?
Posted on: 5/2/2009 9:59 AM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8733999

Frankinstien
Had a few parts laying around so I thought I would throw them together. Tail feathers from a Chakk and a wing from a Tango with about $12 in wood. I have a Saito 56 that im going to use on it with standards servos on the rons and im not too sure about the tail yet. I know, not alot of fuse area but its what was really easy and I fall short as a designer and a builder. Anyways it should be pretty fun to fly and plus I get a plane for about 12 bucks
Posted on: 5/2/2009 9:24 AM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8733941

RE: Are Profiles Out
Word, Thumbs
Posted on: 5/2/2009 9:10 AM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8733917

RE: Help identifying this airplane kit
I was being facetious...
Posted on: 5/1/2009 8:48 AM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8731296

RE: Help identifying this airplane kit
[quote]ORIGINAL: Dave McDonald You will find a lot more info about that plane on that site that is dedicated to profile planes. [/quote] We cantt say The Profile Brotherhood here?
Posted on: 4/28/2009 11:33 PM by Author "nitrofevr" in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=8724602