Nitroplanes 10,000+ subscribers Giveway, Free Planes
[youtube]http://www.youtube.com/watch?v=IpqiR6yWDSc[/youtube] We finally made it to 10,000+ subs so we decided to have a little giveaway for you guys. remember the more subscribers we have the more giveaways we can do. :) FREE RC PLANES RULES for Participating 1. Must be subscribed to our channel 2. Must Favorite this video 3. Must comment on this video That is all, Good luck to everyone!!! [link]http://www.nitroplanes.com[/link]Nitroplanes.com [:@] [:'(][:@][8D][:)][:D][;)][&o][:-][:'(][&:][:D][8D][8D]
Posted on: 3/6/2011 11:38 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=10383752

XHeli.com FREE Shipping now on all rc helicopters
Take advantage of this offer while you can. XHeli.com is having a special free shipping on every rc helicopters and parts. We got rc helicopters for all levels, from beginners to professional type. Co-axial, fixed pitch, gyroscope, 3d and more. Visit XHeli.com today to buy your first rc helicopters.
Posted on: 10/19/2010 7:53 PM by Author "nitrostaff1" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10079624

RE: Payment Pending...
You should have the plane already and enjoy. John Nitro Planes
Posted on: 4/29/2010 3:04 AM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9697171

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
I got the stock prop for the F4u and i got 2. I can ship them to you for $10. Let me know if this is ok with you. I can bill it to the card on the order. John Nitro Planes [quote]ORIGINAL: sam422 order number: yhst-17210252890263-120681 http://www.nitroplanes.com/new204chathi.html brushed Guan Li A-10.   Missing the servo arm for the aileron servo.   Broken servo arm for the nose-wheel, but I made it work. any advise on the break-in required for this? I see that the motors and esc are recommended to be broken-in before flying and I've seen the same said for nimh batteries...could all be done at once by running at low power for a few battery cycles, or...? http://www.nitroplanes.com/gl601-f4u-brushless.html brushless Guan Li F4U.    freakin' awsome plane. horrible instructions for a guy like me that's not much of a modeler, but close enough to RTF I figured it out with a bit of help from google/youtube. flies great and withstood a real hard crash with no real damage other than to my ego...but, I broke (both) props trying to take off from a dirt road, and I'm not sure what I can use to replace 'em, will this work http://www.nitroplanes.com/emp-08038e.html [/quote]
Posted on: 4/15/2010 9:50 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9664084

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: topgun427 I just received my p-51 and my pilot was loose in the canopy. The glue stuck to the instrument panel and pulled the paint off. I would like to have this replaced. My order number is yhst-17210252890263-123006. Otherwise plane looks amazing! I have pictures if needed. Thanks John [/quote] ok I'll replace that for you. John Nitro Planes
Posted on: 4/14/2010 9:03 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9661414

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: typicalmale78 Order #  yhst-17210252890263-121194 <a href=''http://www.nitroplanes.com/gl603-8-a10-brushlessrtf-blue.html''>http://www.nitroplanes.com/gl603-8-a10-brushlessrtf-blue.html Hello,   I just ordered the product in the above link and during assembly I have found a problem. I had the battery charging while I was assembling the aircraft and before I installed the wing I decided to connect the charged battery and check out all the servos and motors and such before finishing completely. My problem is that one of the ESC's seems to be damaged / broken. When I connect the battery it sounds like one of the ESC's has a constant beeping tone and the motor attached to that ESC ''twitches.'' When I disconnect the motor from the ESC and connect the motor to the other ESC the motor works fine and there is no beeping noise or twitching. Also when applying throttle with the controller the motor attached to that ESC never rotates. I have checked the wiring and I can't seem to find anything out of place considering both ESC's jump off of the same main wires from the Rx. I would really appreciate any help and or info on replacing the damaged ESC considering it seems to be glued in place and the wires are soldered. Thanks in advance, Jeremy. [/quote] ok before I do that. Please turn on the radio, put the left joystick up and then connect the battery to the ESC. Does both ESC go into the programming mode? Also Please check the Y receiver harness cable and make sure the plug is properly connected to the correct color wiring. John Nitro Planes
Posted on: 4/14/2010 8:55 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9661388

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: lippucci John I have an Extra 300s purple recently purchases. I cannot find any parts list. Can you help? Also, the Manual is not clear on some issues. Is there another updated manual with more details? I notice this bird is out of stock. Would like another..fine airplane. When will you stock again? Thanks Norm [/quote] Send me a PM and once I got this plane back in stock and I'll let you know. John Nitro Planes
Posted on: 4/14/2010 8:50 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9661369

RE: 93A04-AirField-F4-BlueAngel-RTF
[quote]ORIGINAL: nitrostaff1 ok what's your order number? Lets do things step by step. Please connect only the ESC to the receiver. Turn on the radio, throttle and speed trim down. The connect the battery to the ESC and wait 5 seconds. If you put throttle up, doesn't the fan spin? If not, please make sure the fan blade are spinning freely and it's not binding. If the esc has
Posted on: 4/11/2010 4:26 AM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9652344

RE: 93A04-AirField-F4-BlueAngel-RTF
ok what's your order number? Lets do things step by step. Please connect only the ESC to the receiver. Turn on the radio, throttle and speed trim down. The connect the battery to the ESC and wait 5 seconds. If you put throttle up, doesn't the fan spin? If not, please make sure the fan blade are spinning freely and it's not binding. Let me know. Andy
Posted on: 4/11/2010 4:25 AM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9652342

RE: EXCEED RC 2.4GHz 6 CH RADIO
sorry this radio does not support the trainer/buddy feature. John Nitro Planes
Posted on: 4/11/2010 4:14 AM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9652338

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: Gail Dabbs Hey, John My Ref.ID 682296, CMP045_Gas-Mustang140. Alvin Gibson 496 Collins St. Walhalla SC 29691 I orderd it 11/30/2009 billed on 12/01/2009 delivered on 12/07/2009 tracking. # 1ZX03V030392006078. Last four digits on card are Visa 6826. Let me know when you ship the canopy. Thanks Dale [/quote] canopy sent. USPS 420296919101805213907495562942 John Nitro Planes
Posted on: 3/26/2010 10:16 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9615028

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
what's your order number? I can have you send the ESC back for exchange. John Nitro Planes [quote]ORIGINAL: N215PB 70MM F-16, flew 2nd flight tonight.........engine cuts on and off.......then quit.........crashed in field.......smashed noce cone..........no engine now....dead...ESC i suspect.......2nd flight, can you offer any support and replace ESC. Larry Green [/quote]
Posted on: 3/26/2010 10:11 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9615019

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: Ruptured Duck Order Number yhst-17210252890263-119948  Airfield Skytrainer 182. The plastic clevis that connect the stab to control wire broke when I was connecting it up. The little pin broke off and stayed in the hole on the horn. Can I get a replacement for this item. Obviously I haven't flown the plane yet and it is the last thing I need to do to complete build. Please advise. Thanks [/quote] ok will send you 2 not a problem. John Nitro Planes
Posted on: 3/26/2010 10:10 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9615018

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: ROBERT.S john,the elevator for my cmp 120 hellcat arrived today-well protected & in 1 piece.thanks for the quick service.i should have just contacted you first.,,,,i have a question-the 2 nitro fokker triplanes you carry used to be listed with a 55''wingspan.it now shows them with a 45''wingspan.has this plane been redesigned or is the 45'' a misprint?? the other specs havent changed[motor sizes&weight]thanks again,robert.s [/quote] The fokker triplanes is from another manufacturer so with slightly different hardware but other than that it's all the same. John Nitro Planes
Posted on: 3/26/2010 10:06 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9615011

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: aldoboccaccio Here´s Order Number: 765224 yhst-17210252890263-115729 [/quote] ok sent. John Nitro Planes
Posted on: 3/26/2010 10:04 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9615008

RE: Gearbox and pinion gear for Elite 400
sorry we do not sell gear box except for the stock gear box. If the motor doesn't fit then then you might need to look for another brushless motor or gear box. I know GWS has gearbox and perhaps one might work. John Nitro Planes
Posted on: 3/26/2010 10:00 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9614998

RE: John Please Stock the New Blue LiPo Battery Connectors!
they are the bullet 4.0 mm connectors in the read banana plug. Yes we'll be carry those connectors. John Nitro Planes
Posted on: 3/26/2010 9:55 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9614984

RE: CG of Dynam Skybus DC-3
I would go with the mfg suggested CG. Yes you can add a bigger battery to compensate it. But before you get a new battery just try the stock battery and tape a few pennies as weight and fly it and see how it goes. John Nitro Planes
Posted on: 3/26/2010 9:53 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9614981

RE: back order
what's your order number? John Nitro Planes
Posted on: 3/26/2010 9:51 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9614975

RE: EXCEED RC 2.4GHz 6 CH RADIO
Sorry CD is no longer included but you can download software and manual here: http://www.mycoolheli.com/t6config.html John Nitro Planes
Posted on: 3/24/2010 2:39 AM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9607262

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: ROBERT.S JOHN,I ORDERED A CMP 120 HELLCAT BACK IN NOVEMBER DURING YOUR BLACK FRIDAY SALE.IT ARRIVED WITH A DAMAGED LEFT ELEVATOR[PILOT VIEW]....I E-MAILED PICTURES TO JIMMY RADIEN AS INSTRUCTED.I WAS SENT A REPLACEMENT PART THAT WAS WORSE THEN THE ORIGINAL.I AGAIN SENT NEW PICTURES & WAS TOLD A NEW ONE WAS ON THE WAY.WHEN IT DIDNT SHOW UP I WAS THEN TOLD IT WAS ON BACKORDER & IT WOULD BE ANOTHER 2-3 WEEKS.THAT WAS IN LATE DECEMBER.ITS NOW BEEN 4 MONTHS!!!! PLEASE HELP !! I UNDERSTAND THE PART IS BACKORDERED BUT THIS PLANE HAS BEEN INSTOCK FOR MONTHS.MY ORDER # IS YHST17210252890263101586 THANKS,ROBERT.S [/quote] Got it! I'll send it out to you. John Nitro Planes
Posted on: 3/19/2010 10:21 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596446

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: aldoboccaccio John, I sent an e-mail to your support department last week about receiving the replacement charger and not working.  I received a reply asking me to call or connect to the chat customer service.....I was never able to either connect by phone or chat in two days.  Now I'm trying this method again...... Received the charger...but still it's not good.  I took the charger and battery to local hobby store, they tested the battery and it was good but the replacemenet charger you sent me it's not working.  Very disapointed.  More than three weeks since I purchase the plane..I still have not been able to fly it and it was supposed to be RTF...I ended up buying a new charger at my local shop. Hopefully I'll be able to fly the plane in the next couple of days.  I'm sorry to say that I'm very disappointed with the quality of your products or services...it's just not worth saving some bucks and having to spend time so much time trying to do something you as a company for sake of your reputation and customers should be doing.   To meet clients spectations should be a standard operating procedure at Nitroplanes......''just give them the pickle''...like Bob Farrell would say. Aldo B. [/quote] ok what's your order number? how about this? I'll send you another charger in another brand so that this will not happen again. John Nitro Planes
Posted on: 3/19/2010 10:12 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596433

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
[quote]ORIGINAL: Gail Dabbs Hey John, You said you had a canopy for my CMP 120 P-51 and you would ship it out [/quote] ok what's your order number? ok PM me. I got the canopy next to my seat. I'll ship it out for you. John Nitro Planes
Posted on: 3/19/2010 10:10 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596427

RE: esc problems
yes programming with the radio requires time and patience. I suggest you get the programming card because all you do is press a few buttons. John Nitro Planes
Posted on: 3/19/2010 9:56 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596402

RE: Hawk Sky engine - Attention John ( Nitrostaff1 )
sure a picture would be nice. So what do I need to send you to fix the problem? John Nitro Planes
Posted on: 3/19/2010 9:54 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596394

RE: Question about the Art-Tech F4U Corsair
This is John! lol John Nitro Planes
Posted on: 3/19/2010 9:52 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596388

RE: Airfield 70mm F16 Dead 72mhz Radio New!
For this 72Mhz radio, you put 8 batteries into the radio and turn it ON and the red light will turn ON. You must turn on the radio first before you connect the battery into the plane then put the left joystick and speed trim down. This is a MUST for 72mhz system. John Nitro Planes
Posted on: 3/19/2010 9:50 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596382

RE: Question about the Art-Tech F4U Corsair
oh sorry for the error, it has 4 servos: 2 aileron, 1 rudder, 1 elevator. Thanks for pointing that out. John Nitro Planes
Posted on: 3/19/2010 9:46 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596362

RE: CATALINA 607 SPEED CONTROLLER ??
ok the 2 esc's connector to receiver are joint together with a Y harness and that harness goes into ch3, throttle channel. You do not need to plug anything in to the battery slot on the receiver because your ESC has BEC already. John Nitro Planes
Posted on: 3/19/2010 9:43 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596350

RE: Manuals for Nitromodels
[quote]ORIGINAL: taz06 Would it be possible to get the manual for the NitroModels PT-17 Stearman 40 - 44''? my e-mail is <a href=''mailto:ps7075@yahoo.com''>ps7075@yahoo.com. Thanks. [/quote] emailed. John Nitro Planes
Posted on: 3/19/2010 9:16 PM by Author "nitrostaff1" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596267