RE: Hpi nitro mt
Ok, so i got everything i needed to start the car. I tried starting it and after a while it ran for 5 sec. Then i broke the pull start. So i used a drill. But every time i have to prime it, use the drill, it starts for 1-2 sec then died. I know its not getting gas but i dont know how to solve it. Any help would be great.
Posted on: 7/25/2011 4:21 PM by Author "novakmaxx" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10638612

RE: Hpi nitro mt
alright, here are some pics of after cleaning it. What do you think?
Posted on: 7/23/2011 10:18 PM by Author "novakmaxx" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10635806

RE: Hpi nitro mt
what is the best online website to find aftermarket parts for it? and what parts are compatable with the new one>
Posted on: 7/22/2011 4:13 PM by Author "novakmaxx" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10634065

RE: Hpi nitro mt
Here are some pics of it. Im going to take it apart and clean/inspect every thing and post pics of that later. so far ive taken out the engine and clean that and polished the exhaust manifold. Then i took the rear apart, cleaned all the bearings, noticed its a aftermarket diff but it has some slop in it. I just put some lube in it and put it back. Ill do the front tomorrow and if it have time try to run it.
Posted on: 7/21/2011 10:24 PM by Author "novakmaxx" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10632922

RE: Hpi nitro mt
Those knuckles seem really weak, but the one I bought came with like 10 new ones. What did you pay for yours? Mine has aluminum shocks, tie rods, mid cvd's, carbon fiber upper deck and a picco engine so it's pretty beefed up other than the knuckles. Also mine was a kit if that changes anything I don't know.
Posted on: 7/19/2011 10:17 AM by Author "novakmaxx" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10628758

RE: Hpi nitro mt
In not sure how old it is but it doesn't look 11 years old. It was $150 with the remote and everything. But it seems like you can replace most parts with newer model parts.
Posted on: 7/18/2011 5:46 PM by Author "novakmaxx" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10627572

Hpi nitro mt
I have been out of the hobby of rc for about a year and a half because I bought my 1998 camaro. Any ways I am in Colorado and I saw a rc in a breakfast place and I had to have it. It's a hpi nitro mt and it looks like it has some upgrades like a picco .15 engine. Does anyone know anything about these and stuff like how fast it is and what breaks alot.
Posted on: 7/18/2011 4:24 PM by Author "novakmaxx" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10627448

proline mashers
I am going to get a set of proline mashers for my e-revo but i dont know if i should get 3.8 in or mt size and what rims should i get?
Posted on: 8/20/2009 2:16 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9031231

RE: Plastic vs Aluminum?
i have rpm true track and front arms. i have had rpm arms on all my trucks and a part never broke.
Posted on: 8/8/2009 1:03 PM by Author "novakmaxx" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=8999874

RE: revo metal spur gear
the new e-maxx and revo use the same type of gear. it will work.
Posted on: 8/8/2009 12:58 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8999864

RE: post pictures
my e-revo, and e-maxx.
Posted on: 8/7/2009 3:35 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8997911

RE: ..::The Beater Builds Thread v2.0::..
[quote]ORIGINAL: Krawlin Awesome! Keep us updated! [/quote] the first run the rotor broke. then i got a new one. after that the esc was on fire so i just got a new brushless set up. its a lot of money
Posted on: 7/28/2009 11:14 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8972409

RE: ..::The Beater Builds Thread v2.0::..
my new e-revo! rpm arms wih true track, shocks set up for jumping, novak hv 5.5 set up, dx 3.0 and sr3000 reciver.
Posted on: 7/27/2009 11:54 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8969681

RE: best brushless?
lipos are so much money tho. could i run the mmm or tekin for a couple months in tell i get lipos?
Posted on: 7/27/2009 11:24 AM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8967579

best brushless?
my 2 year old novak esc on my e-revo is fried so its time for a new one. what is the best system of these three: novak hv maxx 6.5, mmm 2200 kv, or the Tekin 1/8 RX8? i am running 12 cells.
Posted on: 7/27/2009 1:56 AM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8966860

what is it worth?
brand new stock e-revo motors, esc, reviver and ratio?
Posted on: 7/24/2009 12:20 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8960405

RE: e-revo questions
i am getting the 1/10 scale e-revo.
Posted on: 7/23/2009 5:04 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8958380

RE: e-revo questions
with this http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHGD4&P=V need a new push rod?
Posted on: 7/23/2009 10:17 AM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8957339

RE: e-revo questions
what is the stock spur gear size on it (i dont have one yet)? also i have read a bit and herd that the suspension is really soft. what is a good set up that is good for big jumps? what rockers should i get?
Posted on: 7/23/2009 12:20 AM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8956597

RE: e-revo questions
this is what i need for the y harness right? http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTSK3&P=ML
Posted on: 7/23/2009 12:02 AM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8956557

RE: e-revo questions
i am going to do mostly on road and a little off road. i have 2 6 cell batteries.
Posted on: 7/23/2009 12:01 AM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8956555

RE: e-revo questions
could i get that at tower hobbies?
Posted on: 7/22/2009 11:52 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8956531

e-revo questions
would a spektrum SR3000 reciver work in a e-revo? i am asking because the e-revo uses 2 sevros for the steering. also i am putting in a novak hv maxx 6.5 motor in it. what size pinion should i buy for it? and what other upgrades should i buy for it for hard bashing? thanks
Posted on: 7/22/2009 11:43 PM by Author "novakmaxx" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=8956507

e-revo questions
would a spektrum SR3000 reciver work in a e-revo? i am asking because the e-revo uses 2 sevros for the steering. also i am putting in a novak hv maxx 6.5 motor in it. what size pinion should i buy for it? and what other upgrades should i buy for it for hard bashing? thanks
Posted on: 7/22/2009 11:14 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8956437

chassis
i have the 3906 e-maxx and i need a chassis that is cheap and will not bend or brake for the highest jumps i can find. i was thinking this one http://www.neweramodels.com/item.cgi...d=&part_id=122 the stock ones all ways are braking off every jump. i need help
Posted on: 7/21/2009 5:55 PM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8952706

RE: pinion?
its this one on there site. http://www.robinsonracing.com/catalog/brushless_pinion.html#.8-mod
Posted on: 7/17/2009 11:59 AM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8941119

pinion?
i need the strongest pinion i can get. i found this and i would use the reducer sleeve but i dont know the pitch. http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001466898&I=LXURT0&P=K i had this gear and it got stripped out. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEX00&P=SM i need 32p and 15 t. i need to know soon so i can order.
Posted on: 7/17/2009 11:24 AM by Author "novakmaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8941007

RE: strongest pinion
what is the pitch of this gear? http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001466898&I=LXURT0&P=K
Posted on: 7/16/2009 10:26 PM by Author "novakmaxx" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=8939831

RE: strongest pinion
is this stronger with the reducer sleeve http://www.robinsonracing.com/catalog/brushless_pinion.html#.8-mod or the steel alloy? http://www.robinsonracing.com/catalog/32pitchpinion.html#32
Posted on: 7/16/2009 9:08 PM by Author "novakmaxx" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=8939617

strongest pinion
i bought a steel spur for my rrp slipper and the pinion stripped out. what is the strongest pinion i can buy? (its a e-maxx) what pitch is the gear?
Posted on: 7/16/2009 6:42 PM by Author "novakmaxx" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=8939316