RE: RC Motorcycle Picture Thread
Great pictures everyone... hey grimguard... didnt you "Join The Band"...on RCC....LOL
Posted on: 8/24/2011 4:30 PM by Author "nuts5000" in the forum "RC Motorcycles"
http://www.rcuniverse.com/forum/fb.asp?m=10685646

RE: Wanting to get a motorcycle, but so hard to find!
I have been trying to sell my HOR for awhile now..On the bay sholud have looked there .....still forsale
Posted on: 8/24/2011 4:25 PM by Author "nuts5000" in the forum "RC Motorcycles"
http://www.rcuniverse.com/forum/fb.asp?m=10685640

RE: HOR servo
I bought a JR mini but the spline was too big... the bike i sold last year had a Hitec in it but dont know which one it was .... thanx anyone else.........??
Posted on: 4/27/2010 12:27 AM by Author "nuts5000" in the forum "RC Motorcycles"
http://www.rcuniverse.com/forum/fb.asp?m=9691801

HOR servo
Does anyone have a list of servos that fit the HOR bike???? thanx
Posted on: 4/26/2010 11:29 PM by Author "nuts5000" in the forum "RC Motorcycles"
http://www.rcuniverse.com/forum/fb.asp?m=9691674

RE: BJ BL cuts out
well its been awhile scince i have been on here... but the little programing card from proboat solved the problem.. thanx to who ever posted that would cure the problem...
Posted on: 12/29/2008 12:28 PM by Author "nuts5000" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=8294454

RE: Where to get this part
traxxas shafts with metal yokes work well... get them at Jakes performance hobbies...
Posted on: 8/22/2008 12:51 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7873972

RE: CKRC Dig Any good?
i would check out the Stage 3 Racing dig thats comming out.. much better.. IMO... ck this out. [link]http://www.jphracing.com/Stage_3_Racing_Dig_Info.cfm[/link]
Posted on: 8/22/2008 12:34 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7873913

RE: new comp rig
venom 2 and 3 cell lipo's.....
Posted on: 6/26/2008 6:40 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7665070

RE: Axial shocks
losi crawler shocks... they are 1 inch shorter it will lower your COG....
Posted on: 6/24/2008 2:20 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7655728

RE: ax-10 drive shafts
switch to traxxas yokes and shafts.. that will take care of that problem... once the axial shaft pops off it will keep comming off... plastic is soft or something
Posted on: 6/24/2008 11:59 AM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7655230

RE: Tamiya Jeep Wrangler
PICTURES PLEASE........................
Posted on: 6/24/2008 12:18 AM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7653934

new comp rig
my new comp rig.. custom TVP chassis... RC4WD beadloks with proline hammers RCP alum. nuckles and c's and rear straight axles stage 3 cromemoly lockers traxxas yokes and drive shafts novak 55 turn tekin FX-R esc losi crawler shocks j concepts body JR ds8711 turns the front wheels w/ 9 1/2 oz. weight in them dx3.0 keeps it in control
Posted on: 6/24/2008 12:00 AM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7653889

RE: Bullitproof Rod ends???
[quote]ORIGINAL: Reiko You can try the FK rod ends, from McMaster-Carr. They are listed under power transmission on [link=http://www.mcmaster.com/]McMaster's web site[/link]. I have many 6-32 ends on my truck, and they are high-strength steel: [image]http://www.knibbet.com/crawler/DSC01611.JPG[/image] Edit: I posted the image with the old suspension mount (ugly [:'(]) [/quote] nice lookin axle.. like to see the rest of it... if you dont mind.. thanx
Posted on: 6/23/2008 11:36 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7653822

RE: cx2 battery help
not so far...
Posted on: 4/8/2008 10:31 AM by Author "nuts5000" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7350837

ax-10comp tuber
a few changes were made since my last post [link]http://www.rcuniverse.com/forum/m_7058600/tm.htm[/link] rc4wd beadlocks proline hammers (AWSOME) losi shocks.... great rc4wd track lok gears traxxax yokes and drive shafts 7cell 4500ma pack for 2 1/2 hour crawl.. but looks ugly alum. panels jr servo (370oz. in.) awsome... you can move rocks. LOL [image]http://i260.photobucket.com/albums/ii8/nuts5000/IMG_1149.jpg[/image] [image]http://i260.photobucket.com/albums/ii8/nuts5000/IMG_1143.jpg[/image]
Posted on: 4/7/2008 10:42 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7349195

RE: rock racer
not too impressed....
Posted on: 4/7/2008 10:20 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7349041

RE: cx2 battery help
anybody else have this problem?????????? help....
Posted on: 4/7/2008 9:24 PM by Author "nuts5000" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7348659

RE: BJ BL cuts out
bump... anyone solve this problem??????????????????? thanx
Posted on: 4/6/2008 12:40 PM by Author "nuts5000" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7341209

RE: cx2 battery help
i have since bought an ICE charger can they be brought back to life with this charger????????
Posted on: 3/29/2008 11:40 AM by Author "nuts5000" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7300815

RE: BJ BL cuts out
cheap cells meanning what???? the cells i have are not the cheap ones, but they are not the best either....... didnt have this problem at first 20 or so runs then i changed to a new 2pl and now it cuts out would a new esc cure the problem???????? or better battery's??? not really ready to switch to lipo...... thanx
Posted on: 3/29/2008 11:29 AM by Author "nuts5000" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7300776

RE: BJ BL cuts out
are you having the same problem???? i have heard of others having the same problem. thanx
Posted on: 3/23/2008 1:34 PM by Author "nuts5000" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7269859

cx2 battery help
i have 5 batteries for my cx2 that sat for a couple of months during the rain and cold fully charged. i went to fly my heli so i put 2 of my batteries on charge then went to fly only to find out that the battery would only give my heli lift for about 3-4 min they are all pretty new, with only 10 flights in them how do you bring them back to life?????? or are they toast???? some are e-flight , common sence, smc batteries thanx
Posted on: 3/23/2008 1:09 PM by Author "nuts5000" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7269763

RE: BJ BL cuts out
bump well this thread is 20 days old from last post. there must someone that has the same problem and cured it it did not start cutting out till i changed to a new radio (2PL) any help would be great Thanx
Posted on: 3/23/2008 1:00 PM by Author "nuts5000" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7269727

RE: BJ BL cuts out
i am using 2 6 cell 4500's it did not do it with the stock radio...
Posted on: 3/10/2008 10:40 AM by Author "nuts5000" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7202929

BJ BL cuts out
how do you stop the BJ BL from cutting out at full throlltle??? i did not have this problem with the stock radio i have just switches radio's to one that has EPA is this the problem with it cutting a full thro. is the EPA adj. too far????? and with this new radio i get more steering and now it hook's real bad but i can adj. that out its the full throl. cut out i cant deal with.. HELP!!!!!!! its all stock.... running 4500's oh and turn fins or NOT on a stock boat???? if they were off maybe it would not hook as bad just slide a bit???? any help would be great THANX
Posted on: 3/9/2008 8:09 PM by Author "nuts5000" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7200264

RE: Finally broke 50 with the Blackjack
Obrien how is it without the turn fins??????? do you know how they are stock with out them????
Posted on: 2/21/2008 1:53 PM by Author "nuts5000" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=7113428

RE: ax 10 tuber
[link]http://www.rcrockcrawling.com/index.php?cPath=48&osCsid=117da2be21c94c5eddb8fd92fcd18441[/link] this is the link to the rockrider chassis HWS no i didnt try it full sprung since this chassis was designed around axles other than axial axles the front tires would drag on the springs in a full turn so i went with internal springs and about 1/2 droop there are still some bugs to work out but it crawls damm good and moving the springs in next to the pumkin was not good at all ( too much sideways angle) i just had an idea and it hurt i though shocks on the inside of the chassis ( just looked at it ) but they will hit the upper links oh well oh yea full sprung had too much belly clearence (3 1/4 in. ) it is at about 2 1/4 in. now
Posted on: 2/17/2008 5:13 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7091044

RE: ax 10 tuber
it has all the goodies r2 disconnect tranny novak rooster crawler w/55t motor rcp C hubs and axle carriers rear straight adpt. and ss straight axles rcp servo plates w/ link mounts custom carbon fiber battery plates (by jakes performance hobbies) alum. team losi servo arms bent links in rear axial alum. shock bodies /ft have internal springs rear super soft rock claws 3 1/2 oz. in each ft wheel [image]http://i260.photobucket.com/albums/ii8/nuts5000/P2090148.jpg[/image]
Posted on: 2/16/2008 9:01 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7086974

RE: ax 10 tuber
[image]http://i260.photobucket.com/albums/ii8/nuts5000/P2090153.jpg?t=1203212980[/image]
Posted on: 2/16/2008 8:50 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7086929

RE: ax 10 tuber
that is a rock rider chassis
Posted on: 2/11/2008 1:37 PM by Author "nuts5000" in the forum "RC Rock Crawlers"
http://www.rcuniverse.com/forum/fb.asp?m=7058700