RE: TMMY Scale Composites 35% scale Cessna
TSHARK, I don't think it was out of line at all. You were absolutely correct that different people have different tastes and different budgets for those tastes. If he was not interested in the aircraft there was no point in even sending a message. People have gotten so self-centered and disrespectful these days.
Posted on: 12/31/2009 10:17 AM by Author "nzak" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=9374695

RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
I know the feeling, I have been without for over a month now[sm=sad_smile.gif]
Posted on: 7/1/2009 7:11 PM by Author "nzak" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8898969

RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
How many 3-position switches?
Posted on: 6/26/2009 10:33 PM by Author "nzak" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8884475

RE: Top Flite Cessna 182 build
Here is what bish wheeler told me about his: The plane weighs just under 12 lbs. It is glassed except I use clearnitrate dope instead of resin. It's easier to work with (less mess) andit weighs less. Have not noticed any tendency toward high speedstalls. You have to kind of fly it right down to the ground as it wantsto float in ground affect. He has an O.S. 61 on his.
Posted on: 6/22/2009 4:10 PM by Author "nzak" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8871941

RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
Thanks for the vids, Mike. Very informative. I am sold on it for sure now.
Posted on: 6/18/2009 10:12 AM by Author "nzak" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8861827

RE: Top Flite Cessna 182 build
That looks like it would be fun to fly. Too bad the Cessna does not have control surfaces like that[;)]
Posted on: 6/17/2009 12:55 PM by Author "nzak" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8859410

RE: Top Flite Cessna 182 build
I started a build thread on mine a couple years ago. I have been updating it on our club site. http://www.slamrc.com/top-flite-cessna-182-skylane-build-log-t190.html If anyone has any interest, I will update on the build thread on here.(the one I started) http://www.rcuniverse.com/forum/m_5675976/anchors_5675976/mpage_1/key_/anchor/tm.htm#5675976
Posted on: 6/15/2009 9:21 PM by Author "nzak" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8854958

RE: Cessna 421 27% twin gas engine..from Wendell Hostetler
I agree. That is a beautiful paint job!!
Posted on: 6/15/2009 3:43 PM by Author "nzak" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8854156

RE: Cessna 182 Scale Build
Moved my build thread to our club forum. http://www.slamrc.com/top-flite-cessna-182-skylane-build-log-t190.html
Posted on: 6/15/2009 3:39 PM by Author "nzak" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8854147

RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
HA! There it is.
Posted on: 6/15/2009 2:52 PM by Author "nzak" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8854039

RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
Thanks for the information Mike, can't wait to get my hands on one!! Nick Mike, congrats on post #3000 also
Posted on: 6/12/2009 4:14 PM by Author "nzak" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8847240

RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
Cool. Thanks Tad!! Now if I could just get a hold of one!!!
Posted on: 6/11/2009 6:24 PM by Author "nzak" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8845017

RE: Cessna Citation 500 Marutaka
Stick08, Unfortunately when I got mine it was already built and sheeted. All the plywood is still there. I don't have many options for saving weight now. I think if I can get a powerful fan and motor combo it will still fly ok. It is on hold right now while I finish my Cessna 182. Thanks, Nick
Posted on: 6/11/2009 2:22 PM by Author "nzak" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8844359

RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
Mike, I know you are getting tons of questions on the new aurora, but I wanted to squeeze one in if I may. Does the servo slow feature require a digital servo or will a standard analog servo work? Thanks in advance, Nick
Posted on: 6/11/2009 11:57 AM by Author "nzak" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8843995

RE: Marutaka Citation Conversion
Congatulations on the maiden!! Thanks for putting the video on too. Seems like it has more than enough power even in the grass. Nick
Posted on: 6/10/2009 10:21 PM by Author "nzak" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8842663

RE: Top Flite Cessna 182 build
Beckerk, I don't think the axle bolts are included. I just looked through my bag from my kit and I don't see any. I don't see them listed on page 5 of the manual either. I am not quite to this stage in my build so someone else can probably give you a little more information about assembly of the wheel pants. It looks to me like the wheel has to be in before you glue the top on. I just read it on page 46, it sure is confusing! I hope someone else can answer before I get to this part too. Nick
Posted on: 6/10/2009 6:18 PM by Author "nzak" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8841999

RE: Marutaka Citation Conversion
Dan, The Citation I have was already built and sheeted when I got it. I just need to finish putting retracts in it and figure out what type of fan system I need to use. I am sure mine will be close to 9lbs. when its finished. Can't wait to see the video!! Nick
Posted on: 6/5/2009 9:28 AM by Author "nzak" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8827394

RE: RCU Roll call time..Where are you from?
[quote]ORIGINAL: ChuckW [quote]ORIGINAL: nzak Born in Porterville, California. Now calling Valdosta, Georgia home. TITLE TOWN USA! ! ! ! [/quote] How'd you manage to get out of here? [/quote] We escaped to Idaho on a hot air ballon!
Posted on: 6/3/2009 2:59 PM by Author "nzak" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8822710

RE: RCU Roll call time..Where are you from?
Born in Porterville, California. Now calling Valdosta, Georgia home. TITLE TOWN USA! ! ! !
Posted on: 6/3/2009 2:41 PM by Author "nzak" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8822651

RE: Marutaka Citation Conversion
Stick 08, Have you had a chance to maiden the Citation yet? Nick
Posted on: 5/31/2009 11:37 AM by Author "nzak" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8813550

RE: 1/8th scale B-1B
Awesome, as usual! Where in Texas is the maiden going to be? Any rough idea of when also? Nick
Posted on: 5/14/2009 9:57 AM by Author "nzak" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8768081

RE: Cessna Citation 500 Marutaka
Stick08, It looks really nice, wish mine was that far along. I am not sure if I want to try to put lights in it since it is already sheeted. Did you build yours exactly by the plans? I understand the motor mounts are probably different. Just want to know if mine will have weight simialar to yours. Nick
Posted on: 5/5/2009 2:41 PM by Author "nzak" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8743037

RE: 1/8th scale B-1B
From watching the videos for the last couple of months and then finding this thread, I was sure they were serious. Someone tell Bob and Pop's that we all believed in this well before the P-200's arrived![:)]
Posted on: 4/29/2009 10:54 PM by Author "nzak" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8727597

RE: 1/8th scale B-1B
Now I feel like a starving dog with someone holding a bowl of food over my head[:D] Is it 5:00 yet?
Posted on: 4/29/2009 3:40 PM by Author "nzak" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8726340

RE: 1/8th scale B-1B
I can't take much more! Any new videos or updates?? I need a 'fix'
Posted on: 4/29/2009 12:03 PM by Author "nzak" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8725793

RE: New JetJoe J-Junior 4lbs turbine
I think 2 of them in a Royal/Marutaka Cessna Citation is in order... Even if it weighs in at 12lbs.
Posted on: 4/19/2009 11:26 PM by Author "nzak" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8697386

RE: Top Flite Cessna 182 build
I think it's looking pretty good. Teookie! Don't be so critical of your work, I have seen some true crap-o-rama out there! I think you have done a great job so far. I need to get back on mine, its only been 2.5 years since I started. I could have built a real one by now. Please keep the posts and the pics coming, I am starting to get motivated! Nick
Posted on: 4/19/2009 10:32 AM by Author "nzak" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8695328

RE: 1/8th scale B-1B
Any new updates? I have been following on youtube since around video #8. Just discovered this thread a couple weeks ago. I can't wait to see some parts coming together!
Posted on: 4/17/2009 12:44 PM by Author "nzak" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8690016

RE: Hostetler Cessna 172 Build
Any updates??
Posted on: 4/11/2009 9:09 AM by Author "nzak" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8670215

RE: Top Flite Cessna 182 build
I am going to guess around $299.95 at Tower. That's the same as the P-51 ARF with retracts.
Posted on: 4/1/2009 4:28 PM by Author "nzak" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8639046