|
RE: 4 elevator set up w 12x??
Thank you Sir. Your a great ambassador for the hobby. Thanks, Vann
Posted on: 7/15/2012 2:05 PM by Author "off2fly"
in the forum "Team RCU - Don Szczur"
http://www.rcuniverse.com/forum/fb.asp?m=11156289
RE: 4 elevator set up w 12x??
Man that would be great,Thank you so much!
Posted on: 6/27/2012 4:04 PM by Author "off2fly"
in the forum "Team RCU - Don Szczur"
http://www.rcuniverse.com/forum/fb.asp?m=11134326
4 elevator set up w 12x??
Anyone know how you can set up two ele. servos per stab with a 12 x?? I have tried multi point mix's with no success. Thanks,Vann[:@]
Posted on: 6/20/2012 6:54 PM by Author "off2fly"
in the forum "Team RCU - Don Szczur"
http://www.rcuniverse.com/forum/fb.asp?m=11125949
RE: LIPO's for receiver???
I'll hook voltage lead on battery lead and try next time out. Thanks for the help. Thanks,Vann
Posted on: 2/19/2012 11:15 AM by Author "off2fly"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10966092
RE: LIPO's for receiver???
I have no way to read the current during flight. Yes these packs just power radio and servos. The voltage is being taken off of one of the empty channels on the eq-10. This is after one flight on a fresh charge. Whats resting voltage? 10 min. flight I flew it four flights and charged each battery took 1100ma Thanks,Vann
Posted on: 2/19/2012 10:07 AM by Author "off2fly"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10966001
LIPO's for receiver???
Gentlemen,I'm running 2 3300 45-90c lipo's with smart fly,unregulated to servos,42% plane w/ 8 JR 8911HV Servos .anyway I notice on telemetry that my voltage moves back and forth from 7.0 -7.4 volts when doing Rolling Harriers and such...I would think with that high a c rating the voltage shouldn't fluctuate that much?Rec. voltage stays constant at 5.3v
Posted on: 2/19/2012 7:34 AM by Author "off2fly"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10965760
RE: Jet crash at the Nall ?
I noticed a lot of people flying little park flyers all over camping areas and such,even though radios were supposed to be off unless at flight station. Wonder if this might have some bearing?[&o]
Posted on: 5/15/2011 2:25 PM by Author "off2fly"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10521613
RE: 3w150 too leannnnnn
LOL!I have always had nothing but problems w/3w![:@]
Posted on: 2/20/2010 11:35 PM by Author "off2fly"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9521873
RE: 3w150 too leannnnnn
I did that and sealed everything,I wouldn't think it would idle so good sucking air?This thing is really getting on my nerve.Thanks,Vann
Posted on: 2/20/2010 11:08 PM by Author "off2fly"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9521813
3w150 too leannnnnn
Gentlemen,I have a old model 3w 150 w/ Walbro,and it keeps running too lean,even w/high needle 3 turns out.I put a kit in the carb and cleaned but no help.Any Idea's? Thanks,Vann[:@]
Posted on: 2/20/2010 10:27 PM by Author "off2fly"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9521710
RE: Cylinder temps?
Gentlemen,thanks for the info.I had a 170 got hot and cut off,Iguess it got too lean,the plug was grey,I was just trying to find a method to make sure engine was tuned correctly.Thanks,Vann
Posted on: 11/26/2009 5:24 PM by Author "off2fly"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9283181
RE: Cylinder temps?
So with on board temp sensors,how can you determine high temp's are baffle related or tune related...lean...Thanks,Vann
Posted on: 11/26/2009 9:42 AM by Author "off2fly"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9282347
RE: Cylinder temps?
Sir,[8D]Can you comment on post 6 if you get a chance?Thanks,Vann
Posted on: 11/26/2009 8:11 AM by Author "off2fly"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9282198
RE: Cylinder temps?
[quote]ORIGINAL: Tired Old Man Good numbers although I prefer relating 150c to provide a small safety buffer for users. 85c is a mimimum operating temp before performing carb adjustments. [/quote] Why 85 c before carb adj?Me not understand.I need engine tuning for dummies i guess![:D]
Posted on: 11/25/2009 8:18 PM by Author "off2fly"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9281234
RE: Cylinder temps?
[quote]ORIGINAL: pe reivers Place your temp sensor against the cylinder wall on the topmost cooling rib in the airflow shade (second best). Better still, use the spark plug washer as sensor. Good operating temperatures will range from 120C to 160C peak. Above that, and be weary of engine damage due to lack of cooling. You will need a sample and hold system like the Venom temp gauge, so you can check real life peak temps. Checks after landing are useless. Badly baffled engines will show surprisingly low temperatures after landing when convection air will cool the engine, while well baffles engines will show higher temp's due to heat soak without airflow. So do not let these after landing measurements fool you into thinking your cooling is OK [/quote] Sir,thank you for the info,its very interesting to me.I have a couple of the mip tg-3 testers coming and wanted to experiment a bit.So I figure do some reg.flying,land and check/reset,maybe some 3d,land recheck,long verticals ect.....How could you determine weather a baffle problem or a lean condition/rich condition?Or can it be used to check tuning?Thanks,Vann [:D]
Posted on: 11/25/2009 7:46 PM by Author "off2fly"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9281139
Cylinder temps?
Gentlemen,what would optimal cyl. temps be while flying on say a DA 150/170 min. Max?I guess the sensors should be on head? Thanks,Vann[:D]
Posted on: 11/25/2009 5:18 PM by Author "off2fly"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9280623
RE: overload protection
Mike thanks for the help,that makes a little more sense.[:D]
Posted on: 7/27/2009 9:54 PM by Author "off2fly"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8969297
RE: overload protection
Mike thanks,so if i I set them to10%,and one starts burning up,the circuit power will only be reduced 10%?Or enough to protect batteries and stuff?[8|] Vann
Posted on: 7/23/2009 9:30 PM by Author "off2fly"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8959058
RE: overload protection
What would you set yours to on 40% bird??It seems reducing power only 1% would not provide much protection,if any.Or am I thinking about this wrong?Thanks for the help. Vann[:-]
Posted on: 7/22/2009 8:39 PM by Author "off2fly"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8955960
overload protection
Gentlemen,I'm confused as to setting the % on the overload protection feature.If I set to 1% does that mean you only get one% protection.I want the protection with out losing servo torque....Signed confused,Thanks,Vann[:D]
Posted on: 7/17/2009 1:27 PM by Author "off2fly"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8941348
RE: Monocote adhesive removal
Ken,Thanks,The color came off w/film but the adhesive starts rolling off when you sand and dents the balsa.If this is normal for monocote i dont want any!Thanks,Vann
Posted on: 2/19/2009 5:47 AM by Author "off2fly"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8493851
Monocote adhesive removal
Anyone know an easy way to remove the adhesive left after removing monocoat?I'm re covering an old carden and someone overheated the covering causing the adhesive to separate[:@] from film.
Posted on: 2/18/2009 8:12 PM by Author "off2fly"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8492396
python/ greeves
Anyone build a python w/da100 and greevs pipes,having trouble w/mounting.Thanks for any help![:D]
Posted on: 8/29/2008 3:45 PM by Author "off2fly"
in the forum "Quique''s Aircraft Support - CLOSED"
http://www.rcuniverse.com/forum/fb.asp?m=7899533
RE: python/ greeves
Gentlemen,thanks for the help,I guess i need to look a little harder,i might be blind in one eye and can't see out of the other!Man those pipes look huge to me,look like the same pipes on my 150![:D]
Posted on: 8/4/2008 5:51 AM by Author "off2fly"
in the forum "Quique''s Aircraft Support - CLOSED"
http://www.rcuniverse.com/forum/fb.asp?m=7806113
RE: python/ greeves
Rezagh,the 100cc kimbal QQ is standing on spinner on the qq web site,What kind of pipes are they?Was that plane modified for the pipes?The site says plug and run tuned pipes!Thanks,Vann NO COMPRENDIE!
Posted on: 8/3/2008 10:44 PM by Author "off2fly"
in the forum "Quique''s Aircraft Support - CLOSED"
http://www.rcuniverse.com/forum/fb.asp?m=7805283
RE: python/ greeves
Rezagh,I have a 100cc,i guess I missed something somewhere,i thought the web site said plug and play greve pipe/cannister mounts!Dawg I guess I'll have to send them back.
Posted on: 8/3/2008 10:27 PM by Author "off2fly"
in the forum "Quique''s Aircraft Support - CLOSED"
http://www.rcuniverse.com/forum/fb.asp?m=7805207
RE: python/ greeves
Rezagh thanks,They should fit in the tunnel shouldn'[:D]t they?
Posted on: 8/3/2008 8:55 AM by Author "off2fly"
in the forum "Quique''s Aircraft Support - CLOSED"
http://www.rcuniverse.com/forum/fb.asp?m=7802792
python/ greeves
I got my greeves for the pyton,and they are the exact same as the ones on my 120" yak.They must have sent the wrong ones?I sure cat see how these would fit.Anyone know the deal?Thanks,Vann[:D]
Posted on: 8/2/2008 8:29 PM by Author "off2fly"
in the forum "Quique''s Aircraft Support - CLOSED"
http://www.rcuniverse.com/forum/fb.asp?m=7801377
RE: Python AWSOME!
The best quality I have seen in a ARF ,its a very easy build,everyone i have talked to says they fly like a foamy!I have a 120" yak from qq and it's the best flying plane i have ever flown,When you fly it all you can say is SWEET!Awsome[:D] planes!
Posted on: 7/29/2008 9:43 PM by Author "off2fly"
in the forum "Quique''s Aircraft Support - CLOSED"
http://www.rcuniverse.com/forum/fb.asp?m=7786672
Python AWSOME!
Just got my python tonight,everything is immaculate!And a terrific covering job!Every part,perfect, nice paint job and great match!QQ is setting a new standard w/ this plane.Can't wait to get it in the air,I know it flys as good as it looks,seen it i did![:D]
Posted on: 7/28/2008 11:11 PM by Author "off2fly"
in the forum "Quique''s Aircraft Support - CLOSED"
http://www.rcuniverse.com/forum/fb.asp?m=7782807
| 
