RE: Zenoah G62 EI conversion
This web site has conversions for Zenoah 62.: rcextrempower.net
Posted on: 6/8/2011 5:04 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10563913

RE: MOKI XL 35cc
Hi scot. Go to: tech.flygsw.org/moki210gasser.htm. this might help you deside, also you could just run it on FAI fuel with the Rcexl ignition if you don't wish to change the carb.
Posted on: 5/22/2011 8:51 AM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10534140

RE: chainsaw/trimmer conversions
Check out the Farmers exchange for echo short blocks. You can choose your desired size And there are parts on the net for convercions. farmex.now.TC
Posted on: 4/27/2011 11:16 AM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10488118

RE: Echo CS3900
HI, My bad. I hit the wrong keys. The short block for thr CS 3900 is SB1013. Priced at $154.97. Sorry about that.
Posted on: 2/2/2011 7:31 AM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10306833

RE: Echo CS3900
I have two of these Echo 3900 Short blocks (SB 1018) converted. Farmers Exchange still have them listed in the Echo section fro $139.39. They are a very easy conversion, All you need to make is the ring to fit on the intake with a couple of set schews and some sealer. (epoxy) The prop hubs and mufflers can by bought from BME, made fror the 50cc Classic engines. the 40cc (3900) also has beam mounts. An hour or so of machining you should be ready to go. Also Brillelli customes have fittings to install the carbs. The engines with mufflers, carb, Hangar mounts and a rohr BME 20-8 prop No ign, weighs 3# 6.6 oz. Check my gallery for Pics.
Posted on: 2/1/2011 5:24 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10305876

RE: Huskie Challenger 5.4 twin- Who sells 'em ?
Hi, Check out RCWARBIRDS.COM > there is a picture of Dennis D. Cooks 96" P51, Powered by a Huskie Challenger 5.4 Twin. If you can contact him, he may be able to to furnish you some helpful info. Good luck
Posted on: 1/28/2011 1:18 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10295984

RE: Want To Build A 100cc 4-Cylinder Conversion For Me?
Good morning, If you will scroll to the bottom of this page and open pg.5, scroll down to bottom of that page ann open pg.15, scroll down to the Echo BME twin subject and open pg. 15, go down to post # 357 (aviatorplus) He is building the engine you are looking for. Contact him. Maybe he could build one for you. Good luck
Posted on: 1/7/2011 9:49 AM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10245816

RE: Clean Running 4 stroke
Hi, Source for Nitro Methane! Klotz carries many types of fuel and lubs. Nitro is about $18.00 per gallon if you can find a dealer close enough for local pick-up. HASMAT cost is very high. If you have a drag strip near you, you might be able to buy small amouts from of the racers.
Posted on: 12/18/2010 7:19 AM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10204280

RE: Large conversion engine source?
Sent you a PM
Posted on: 12/14/2010 8:31 AM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10196441

RE: Brillelli 366GT *60cc*
Hi, brillellicustoms.com Mark will help you out.
Posted on: 12/7/2010 9:08 AM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10182245

RE: Been quiet on the ole conversion board..
HI, Posted some new pictures of my work on my Echo 61cc twin. made a muffler for it, still need to get it powder coated. I am having a problem trying to figure how to make a mount for thepick up and where to locate it. Any suggestions anyone? Pictures located in my gallery.
Posted on: 11/15/2010 9:45 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10137911

RE: Conversion Photos
Click on my Gallery logo below and you can view some of my conversions and aircraft in work.
Posted on: 8/2/2010 5:29 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9906194

RE: Zenoah Gas that was converted to Glow
Try>>> www.agaperacingandhobby.com . They carry ign. systems at a good price.
Posted on: 6/22/2010 10:40 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9820848

RE: Been quiet on the ole conversion board..

Posted on: 5/25/2010 8:32 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9724267

RE: Been quiet on the ole conversion board..
I hear that, I just have to do a little at a time as I can find a few bucks. I have been working on an Echo 610cc twin for a while. If you would like to see the progress on it you will need to open my profile and look in my gallery.
Posted on: 5/25/2010 8:29 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9723942

RE: Been quiet on the ole conversion board..
Go to www.agaperacingandhobby.com for ignition systems cheap and plug adapters also.
Posted on: 5/10/2010 2:06 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9723668

RE: small engine shops
Partstree.com Located in Austin, Texas. I have had good luck finding parts for my Echo CS 61 twin, it has been out of production for over 15 yrs.
Posted on: 5/2/2010 10:45 AM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9704204

RE: Anyone flown or seen one of the new Fox 50's yet?
I haven't seen the 12cc (50?) engine or pictures, but the web site Foxmanufacturing.com, includes it and a new 200cc in their spring sale with free shipping>
Posted on: 5/2/2010 10:29 AM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9704171

RE: World Models 80
worldmodels.com Span 80" area 1138 length 68 wt. 13# eng 2 stroke 160 6 chn radio, 7 std. servoes, 2 low profile retracts
Posted on: 4/17/2010 12:06 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9667728

RE: Echo BME twin
Hi Matt, I have tried to send a couple of replys to your PM. I don't know if you received them or not. Anyway I will try again since I don't know your Email. The site you are looking for is (arboristsite.com.) Also I had a question for you, If you could measure the G62 prop hub mount Holes center to center distancefor me I would appreicate it. I have the flywheel that came off of the Echo 61 that I could have the center cut out of if the holes would match up. I hope this PM gets to you. Later George
Posted on: 4/5/2010 12:44 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9638898

RE: ECHO chainsaw engines
Hi, If you know any one who works in a fire house, or anyone who does know someone you could ask around about the ECHO QV-680, 66.8cc or QV-8000 80.7cc Quick Vent saws. They should be real horses. The 680 is rated at max rpm of 13,000 and the 8000 is at 12,500, with no load. It would be a lot of work to cut the cases down but you know that. They are both in the range you are looking for.
Posted on: 12/20/2009 9:27 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9347183

RE: My locally available oils >>>
The two oils you mentioned, I would say to use the Redline racing 2 stroke, At the manf recomindations. Just my take.
Posted on: 12/7/2009 9:48 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9312420

RE: No more neoprene in my tanks!
Hi captinjohn, You might like to try some clear blue urethane fuel line # 7015, used on Rotax fuel systems, if they use it on ultra lite aircraft it must be good quality. Go to www.rotaxparts.net and look thru all categories.
Posted on: 11/2/2009 12:58 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9219825

RE: Gas/kerosene pumps
Try this site, Rotaxparts.net, ALL, fuel pumps & fueling Equip., Fuel fittings, Fuel lines & primers. You should beable to find all yuor fuel hard ware on this site.
Posted on: 10/28/2009 5:56 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9210175

RE: 2 stroke oil for petrol engines?
I don't know if Rotax engines are sold in GB or not but they carry Pennzoil 2 stroke oil in the US
Posted on: 10/15/2009 1:52 PM by Author "oldtimer2" in the forum "RC Fuels"
http://www.rcuniverse.com/forum/fb.asp?m=9175563

RE: Pennzoil Air-Cooled Supply
Try this thread, http://oilstore.stores.yahoo.net/outdoors.html. They offer a case of 24 8oz bottles for $27.39 + shipping
Posted on: 10/6/2009 8:07 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9152230

RE: Favorite larger engines?
The Echo (Kioritz) Twin cylinder model Chain saw # is CTS-610evl. Some times you see them for sale on E-b-y, but not cheap and not often. One of RCIgnitions Zenoah G62 light would probably be lighter, more powerful and cheaper in the long run.
Posted on: 9/13/2009 7:52 PM by Author "oldtimer2" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9092912

RE: BEST PLACE TO GET REPLACEMENT CARBS?
error
Posted on: 8/23/2009 8:28 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9038841

RE: Cant find Penziol air cooled anywhere, What else?
try oilstore.oilstore.yahoo.net click on the outdoor.
Posted on: 7/23/2009 5:09 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8958399

RE: Brillelli 366GT *60cc*
Check with brillellicustoms.com Mark should be able to manuf.one or tell how/where to get it fixed.
Posted on: 7/5/2009 6:05 PM by Author "oldtimer2" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8908628