|
clutch help
hi guys, its time for a new clutch shoes as it is slipping but not sure on what to get...
Posted on: 9/17/2009 9:12 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9102837
how much is it worth??
hi guys, I've had my sav for a few years now and sorta built up a stock pile of parts. just wondering how much you guys think its all worth including remote and charger cause i got no idea. its a savage x ss 4.6 3 speed with a box full of parts including new piston, liner and crank shaft etc... thanks
Posted on: 9/17/2009 9:05 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9102822
Mission by Schumacher
Hi all, just after some advice for what brushless system to get for my Mission thanks
Posted on: 1/16/2009 7:05 PM by Author "oreo123"
in the forum "Schumacher Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8366366
RE: Good Pipe for stock savage x 4.6
the 086 pipe looks to be bigger than the 053, does that mean the savage will run quieter?
Posted on: 1/14/2009 8:32 PM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8358912
RE: 4.6 carburetor help
would some thread lock work?, also, do you know the factory settings for the Hsn and the Lsn?
Posted on: 1/6/2009 12:23 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8324190
RE: 4.6 carburetor help
do you know what the factory setting is for it?
Posted on: 1/5/2009 11:53 PM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8324100
4.6 carburetor help
Hi all, prob a stupid question to you but I cant work out what this screw does on the carburetor, the manual says nothing
Posted on: 1/5/2009 9:07 PM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8323420
RE: savage 3 speed?
My unassembled 3-speed arrived off eBay yesterday,I'm wondering if I need to take the whole transmission out to adjust 2-3? Does anyone have the factory settings for the 3 speed? Thanks
Posted on: 10/23/2008 6:25 PM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8078447
RE: Antenna Problems
You can buy a new antenna and solder it on
Posted on: 10/20/2008 5:53 PM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8067485
keep on loosing "screw shaft"
Hi guy's, I have lost my "screw shaft" twice now while driving, goes through the rear out drive cup thing on transmission, the screws were Thread locked, and very tight. Sort of getting annoying after a while [:@] wondering if theres something I'm doing something wrong, or if its just the Tamiya thread lock I'm using Thanks
Posted on: 10/17/2008 8:12 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8057001
RE: Reducing the Engine Noise of Savage 25?
if I stuck a Mammoth st pipe on the savage ss, would it damage the engine?
Posted on: 10/16/2008 6:49 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8053587
RE: frequntly needed parts
fuel helps to [X(]
Posted on: 10/14/2008 8:32 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8047524
RE: Savage X Chassis Side Plates on a ss
They don't come with the conversion kit
Posted on: 10/12/2008 6:58 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8041184
RE: Savage X Chassis Side Plates on a ss
will the x side plates effect the ground clearence?
Posted on: 10/12/2008 2:09 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8040977
RE: Savage X Chassis Side Plates on a ss
lol [:D]
Posted on: 10/12/2008 1:51 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8040958
RE: Savage X Chassis Side Plates on a ss
OK, Thanks
Posted on: 10/12/2008 12:51 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8040856
RE: Savage X Chassis Side Plates on a ss
what do you mean by dremel out, make shorter?
Posted on: 10/12/2008 12:10 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8040773
RE: Savage X Chassis Side Plates on a ss
what's a cross member?
Posted on: 10/11/2008 11:11 PM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8040640
Savage X Chassis Side Plates on a ss
I have read that the savage x side plates lowers the motor, transmission and radio box by 5mm, Improving stability. would I notice the difference and could I swap the chassis side plates on my ss with the x side plates?
Posted on: 10/11/2008 10:30 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8038907
RE: it's stuck with no reason! please help mee....
I think the truck wouldn't of stopped really aggressive with no reason if the slipper clutch nut was loose, but all I could suggest is check your disc brakes underneath, make sure that they are not bent, happened to me before. To check it, take the brakes off and see if your gear box turns at all
Posted on: 10/11/2008 7:33 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8038618
RE: savage ss 4.6 pipe
do you know if it will change the performance?
Posted on: 10/10/2008 10:18 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8036074
savage ss 4.6 pipe
Hi guy's, I'm thinking about getting a new muffler, are there any out there that could make the sav a little bit quiter (neighbors hate me) and give better performance? Would the pipe off a mammoth st work or just be worse? Thanks
Posted on: 10/10/2008 9:28 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8035950
savage ss 4.6 gearing
What do you guy's reckon is the best gearing for a 2-speed and 3-speed savage, (clutch bell and spur gear) for more top end speed?
Posted on: 10/8/2008 12:11 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8029015
RE: Savage xl conversion question's
so where can I find the width extension?
Posted on: 10/5/2008 6:41 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8019986
RE: Savage xl conversion question's
[quote]ORIGINAL: bradzx88 hey oreo are you converting your 25 savage? to a XL? [/quote] Nah, I've got a savage ss 4.6 (2-speed) and I want to convert it to a XL
Posted on: 10/5/2008 1:08 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8019667
Savage xl conversion question's
Hi all, I'm wondering if I buy the conversion kit (HPI Savage XL Chassis Conversion Set Part# 100413), would I have to buy the 5.9cc engine or could I use my 4.6cc Also do I need to buy the 3-speed gear box or can I still use the 2-speed? Thanks
Posted on: 10/4/2008 10:45 PM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8019334
RE: savage x ss-3 speed transmission
I'm going to buy the 3 speed transmission off Ebay to put in my savage x ss 4.6, and saw that you can either buy it assembled or unassembled. Has anybody ever assembled one and is it hard to assemble? Is it worth buying it assembled or doesn't it really matter?
Posted on: 8/10/2008 1:48 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7828816
RE: savage x ss-3 speed transmission
could the same 3 speed transmission used in the savage x ss/savage xl 5.9?
Posted on: 8/8/2008 6:48 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7822862
savage x ss-3 speed transmission
Hi guy's, I'm looking to upgrade my savage from the 2 speed, to the three speed gear box. I'm wondering what else I would have to buy/change apart from buying the 3 Speed Transmission. Thank's
Posted on: 8/4/2008 4:43 AM by Author "oreo123"
in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7806046
RE: Official XXX-NT Thread!!!
would you have to run an engine in after replacing only the head button?
Posted on: 7/26/2008 4:49 AM by Author "oreo123"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=7773584
| 
