EFLITE POWER 52 POWER LOSS
Hi I hava a hangar9 katana 50 powed by an Eflite power 52 ,Eflite 80 amp esc, 5 cell 18.4 lipo and a 14x8 apc prop. While flying it has lots of power and can climb forever but 8 to 10 seconds into a hover the motor makes a screaching sound and then a total loss of power if i throttle down and then throttle up it runs fine. this has now happend 4 times . Has anyone had this problem or know weather it is an esc or motor problem. I have tried changing props and timing but nothing has changed. Any response will be greatly appreciated.
Posted on: 6/7/2012 10:15 PM by Author "ozzy9" in the forum "E-Flight Power Sources"
http://www.rcuniverse.com/forum/fb.asp?m=11110851

EFLITE POWER 52 MOTOR
I have a Hanger 9 Katana 50 powered by a power 52 motor , Eflite 80 amp pro esc, 5 cell 18.5 volt lipo and 14x7 prop. It flys really good with lots of power but if i try to hover after about 8 to 10 seconds the motor makes a screaching noise then cuts out .The first time this happend i was high enough to glide it in and land the second time i throttled down for a couple of seconds then throttled back up and motor was fine . This has now happend 3 times . Does anyone know what is going on ? Any replies will be greatly appreciated!
Posted on: 5/19/2012 8:54 PM by Author "ozzy9" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=11087320

RE: engine temp
Thank you for your replies!
Posted on: 2/19/2012 2:42 PM by Author "ozzy9" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10966383

engine temp
Hi Im setting up my telemetry on my plane . I have an O.S. 46 ax . My question is what is how hot should the engine get or what is the nax temperature. Any replies will be greatly appreciated.
Posted on: 2/18/2012 6:32 PM by Author "ozzy9" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10965219

RE: spectrum dx7 trouble
Thank you for your replies.
Posted on: 9/26/2009 11:46 PM by Author "ozzy9" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=9126464

spectrum dx7 trouble
yesterday i turned on the transmitter an the screen read BACKUP ERROR . Does anyone know how i can fix this. I have had the radio for about 2 1/2 years and it has been well taken care of .
Posted on: 9/2/2009 11:33 PM by Author "ozzy9" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=9065968

RE: Raptor 30 Conversion
Hey Guys Thanks for your help!
Posted on: 10/4/2007 10:30 PM by Author "ozzy9" in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=6451134

Raptor 30 Conversion
Hi ! I have a Raptor 30 v2 ARF. I want to convert it to a 50 , but don't know what i need. Any reply appreciated.
Posted on: 10/4/2007 12:54 AM by Author "ozzy9" in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=6447568

Parts for Himoto Rapida Pro
Hi! My cousin recently brought me his rapida pro that he bought used while looking it over i noticed that one of the two tranny gears were stripped. I went to my local hobby shopand was told that the gear that was stripped was out of date and could only get it on-line . The problem is that i can find the car but no parts. Does anyone know where to get parts or maby a diffrent tranny to put in. Any reply will be appreciated.
Posted on: 1/21/2007 12:46 AM by Author "ozzy9" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5298002

RE: 30 v2 Question
Thanks for your reply Helimedic. And Merry Christmas
Posted on: 12/25/2006 8:04 PM by Author "ozzy9" in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=5160785

30 v2 Question
Hi ! I just bought a raptor 30 v2 and have a couple of questions. First i currently fly a t-rex with a futaba gy240 gyro , will this gyro work well with the raptor. Second I like the looks of carbon blades and all metal head . Is the 30 v2 something that is worth that kind of upgrade or should i save that for a 50 or 60 later. Any reply is appriciated.
Posted on: 12/25/2006 7:16 PM by Author "ozzy9" in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=5160652

E-flite ultimate fx 3d question.
Hi ! I just purchased an e-flite ultimate 3d plane and have couple of questions. Although i have had a few planes this is my first 3d plane. I noticed when i mounted the motor on the motor shaft the shaft was angled up and to the right is it suposed to be like that. Question number 2 , after putting the plane together i balanced it but with the battery pack being mounted on the side wall of the plane left to right balance is way off is this correct. Any replys are greatly appreiciated!
Posted on: 8/28/2006 12:44 AM by Author "ozzy9" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4678613

Great Planes Fun Force Hellcat EP ARF
HI ! I was at the hobby shop today and saw this plane. Just wondering how it flies or handles. I'm currently flying a Rear Bear EP and a mini slinger but want somthing that can do a little 3D. Is this the plane? Any reply is appriciated!
Posted on: 8/23/2006 10:29 PM by Author "ozzy9" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=4661781

RE: Show off your heli!
Here's mine !
Posted on: 8/21/2006 1:19 AM by Author "ozzy9" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=4648953

RE: Li-po batteries-no idea how to take care of!
Paul The short cord on your lipo is a balancing cord. The red and black wires are pos and neg. Here is a pic of my batt ang charger with a set of DEANS ULTRA PLUGS .
Posted on: 4/24/2006 2:21 AM by Author "ozzy9" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=4203044

PC-9 ARF
Hi ! I was thinking of buying a PC-9 and was wondering if anyone has one and if its a fast plane. I'm currently flying a RARE BEAR EP with a 370 outrunner,25amp esc , and 1320 t.t. lipos which is pretty fast but is only a 3 ch.
Posted on: 4/24/2006 12:24 AM by Author "ozzy9" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=4202792

NEW MOTOR 4 TYPHOON
Hi ! I have a PARKZONE TYPHOON and have been having problems with my motor cutting off at 3/4 to full throttle. I'm going to buy a new one but was wondering if anyone was using something other than the stock replacement and what kind of results you were getting. Your replys will be greatly appriciated .
Posted on: 4/22/2006 3:00 AM by Author "ozzy9" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4195570

RE: Thunder Tigre Rare Bear
Budgie I have had 7 flights with my Rare Bare. It is setup with a t.t. 1320 lipo,370 E-Flight outrunner brushless motor, Castle Creations 25 esc . My firts flight was not so good due to C. G. from the manual being set back to far by 1/4 to 1/2 inch and burning out stock motor. With my current setup it is a really good flying plane . I don't have landing gear on it so i have to hand launch it and and slow input on the controls is a must . It does rolls,loops,inverted, and slow flight with ease. I'm not to happy whith top speed though, I'm thinking of getting a 400 motor. Oh well i hopes this helps.
Posted on: 3/24/2006 2:06 AM by Author "ozzy9" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=4075649

RARE BEAR EP Help!
HI , I recently buoght my first foam plane the Rare Bear ep. It is equiped with an E-flight 370 outrunner brushless motor,T.T. 1320 lipo and Castle Creations 25 speed control. I put it together without landing gear so i have to hand launch it. when launched it will fly level about 20 feet or so and start to climb and then becomes really hard to fly. The c.g. and control throws are set to the manuels stats. When in the air at just above 1/2 throttle it seem to be tail heavy and when 3/4 throttle it just get uncontrollable. What gives ! Do i have enough power, not enough ex- perience or a poor flying plane.
Posted on: 3/22/2006 1:52 AM by Author "ozzy9" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=4066533

RE: New Mini Slinger
Bevo The Mini Slinger is an awsome little plane. I use an Electrify C-12 esc ,11.1v 1320 mah li-poly and stock moter and get 25-30 minutes of flight time . Oh yea! IT'S FAST!
Posted on: 3/13/2006 12:45 AM by Author "ozzy9" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=4027189

RE: Please help me trim out my GWS Mini Dragonfly
Hi ! Bmr4life To find your CG face the heli towards you and lift it from your flybar one hand on each end. Slide your battery back and forth until the heli sits level. Also center your trim on your TX and adjust your your servo arms so that your swashplate is level each way. Hope this info helps.
Posted on: 6/22/2005 10:34 PM by Author "ozzy9" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3099666

HOW MANY CHANNELS
Whats up Guys! I've just bought a T-Rex and was going thruogh the manuel when i read that it required a 7 channel transmitter. I was thinking of buying the JR XP6102 radio which is a 6 channel. Will it work or do i really need a 7 channel. I'm new to anything over 4 channel so any reply is greatly appreciated.
Posted on: 6/11/2005 7:26 PM by Author "ozzy9" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3064612