RE: TA 152H Meister Scale Project Grun 4
Flying Coffin...nice. That's what they called the HE 162
Posted on: 9/18/2012 7:47 AM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11232320

RE: TA 152H Meister Scale Project Grun 4
Obberkommando der Luftwaffe paid a sight visit today. Pictures don't do this project justice. The craftsmanship in person has to be seen. A lot still needs to be done to get this operational. I would like to think it can be RTF before Christmas...I doubt any sooner. This one will be maiden flight at the dry lake bed "rabbit" our trusty spot for big bird test flights. It's a few months off but will be well documented.
Posted on: 9/14/2012 6:17 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11228813

RE: TA 152H Meister Scale Project Grun 4
What no weld lines?[;)]
Posted on: 9/13/2012 11:34 AM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11227400

RE: TA 152H Meister Scale Project Grun 4
Yes DD...I like the way you think...lets make the Turbo scoop functional in a sense...get some more air across those Lipos wont hurt. Glad to see the package from Dino arrived. Not crazy about that pilot...but he is for another project...Would look much better if they put him in a late war leather jacket...instead of the early 1940's BofB gear or Polish campaign.
Posted on: 9/12/2012 1:53 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11226459

RE: TA 152H Meister Scale Project Grun 4
DD Doing some planning. When do you estimate this one will clear your bench?
Posted on: 9/11/2012 7:44 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11225666

RE: TA 152H Meister Scale Project Grun 4
Burley Still looking for some good 411 and photos on hooking up the Jeti ESC. Manual is worthless ...and this thing is not the normal Castle setup. I know your mafia has done some big electrics...anyone have some detailed photos of the setup and wiring?
Posted on: 9/10/2012 6:27 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11224411

RE: TA 152H Meister Scale Project Grun 4
Super clean work as always DD.
Posted on: 9/10/2012 6:11 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11224393

RE: TA 152H Meister Scale Project Grun 4
What the? You two are killing me. Delivery from Uncle Dino on its way.
Posted on: 9/4/2012 6:35 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11217686

RE: TF FW190 GIANT ARF
When your back on your feet. I am accept that challenge. Bring it on.
Posted on: 8/29/2012 6:23 PM by Author "pandissix" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11210938

RE: TF FW190 GIANT ARF
To late Charles....beat you to it. Check your email....ping me back on that "thing" Rich
Posted on: 8/29/2012 5:46 PM by Author "pandissix" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11210878

RE: TF FW190 GIANT ARF
Adam Your pilots look sharp and accurate for a JG1 or JG26 1943 or so pilot. Let me know when you have a good 1/4 scale one with all leather gear for a late war 1945 JG301 project. Rich
Posted on: 8/27/2012 9:23 PM by Author "pandissix" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11208540

RE: ME 262 info for Father & Son Project
Did a big twin 120 mm edf project a few years ago. Back then we were still trying to get all the bugs out of twin edf....video is a bit long but I think well done. It gives all the details etc if your looking for a project. Still see a few JS kits pop on RCU every once in a while. http://www.youtube.com/watch?v=kyVpzoQwoKg&feature=youtube_gdata_player Still flying this one and for now. No flameouts.
Posted on: 8/23/2012 9:20 PM by Author "pandissix" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11204122

RE: TF FW190 GIANT ARF
RE: best pilot. Profile looks like Rudel. But for a 190 I would hope you base on Heinz Bar or Priller for an accurate experten in western defense flight ops.
Posted on: 8/23/2012 7:48 PM by Author "pandissix" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11204051

RE: TA 152H Meister Scale Project Grun 4
Well since the only plane I can fly right now in this 108 degree heat is a Habu...not much of a challenge there you.
Posted on: 8/14/2012 2:33 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11193465

RE: TA 152H Meister Scale Project Grun 4
[quote]ORIGINAL: David010567 Cowl Mounting... I trimmed the supplied plywood cowl mounting ring to clear the Hacker motor and attached it to the cowl using Hysol. Made three wooden stand offs that are threaded 1/4-20 on each end. I decided to put a small plywood ledge on the fuselage for the cowl to rest on. The cowl is mounted with (3) 1/4-20 nylon bolts from the inside Thus... All the cowl mounting bolts are hidden. [/quote] Slick rig here DD....worst part is those two BF109 Port/Starboard....collecting dust....
Posted on: 8/14/2012 2:02 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11193429

RE: TA 152H Meister Scale Project Grun 4
DD, With the hatch...my main concern is to get in there quickly and with little hassel. So a quick access that is attached in a manner that does not require screws etc. So the 262 engine hatch works good on mine...and I see Burley is using the same rig in the picture you showed. I am also a fan of the rare eath magnets...Let the builder use his judgement here....just make it a quick access for those Oh Sh%% moments when the Lipos need removed quickly and a hatch that does not have a lot of play in it.
Posted on: 8/14/2012 1:53 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11193418

RE: That nasty AT-6 Bounce
Owner of two Byron AT6. The only thing that stops the bounce is the stick forward trick listed above. Goes against your instincts but as soon as the mains touch give her a bleep of down input. Will stop the bounce and stick. Takes some getting use too.
Posted on: 8/13/2012 8:25 PM by Author "pandissix" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11192464

RE: Sist FW190A8 1:4
Sweet!!! Thanks
Posted on: 7/30/2012 4:42 PM by Author "pandissix" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11175110

RE: Sist FW190A8 1:4
Frets... Thanks for the info you posted. With Burley's help, I found the Black Cat. I have Vikie over at Getstencils.com making me some dry tansfers...Having some artisitic creativity putting the cat on Yellow 5 here. Some research I have done...shows the cat on Yellow 5 as well...so this is not a show plane...just a weekend flyers...so having some fun adding what I like. RP
Posted on: 7/30/2012 8:01 AM by Author "pandissix" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11174442

RE: ME 262 Rebuild/Electric Conversion
That issue resolved sometime ago. Never did figure out why those fans didn't work for this application. Still head scratching. I fly the eBandit with EVF2 in it and its 190 plus all day with 6 minute flights. So there a good product. Maybe just finicky.
Posted on: 7/22/2012 7:40 AM by Author "pandissix" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11164397

RE: TA 152H Meister Scale Project Grun 4
Dave I like your thoughts of the the scale vents in the cowel and putting the esc there. My only request is the esc not be visible. So I don't want anyone looking down on the plane and seeing the esc. So let me know your thoughts.
Posted on: 7/13/2012 7:05 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11154434

RE: TA 152H Meister Scale Project Grun 4
It's been so long I forget all the details. But this started as a two Meister Scale D9 kits and a TA152 plans and wing kit from Ty. Bash all that together and poof you have this kit bashed highly modified TA152. I know Ty built one of these years ago, I am not familar of anyone else taking on this project. Lord knows I don't have the skills alone to do this so it's a joint project. Burley will be painting it and I will be doing all the electronics and maiden.
Posted on: 7/13/2012 7:02 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11154427

RE: Sist FW190A8 1:4
Anyone have a good Jpeg of the Black Cat on White 11 above? Need something to make dry transfer stencil.
Posted on: 7/11/2012 8:20 PM by Author "pandissix" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11152086

RE: TA 152H Meister Scale Project Grun 4
Dave. Yes I think a baffle for air on the ESC is a good idea.
Posted on: 7/11/2012 8:15 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11152081

RE: TA 152H Meister Scale Project Grun 4
Awesome work DD!!! Think we can get this finished, painted and maiden before WOTR?
Posted on: 7/10/2012 6:09 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11150676

RE: TA 152H Meister Scale Project Grun 4
[quote]ORIGINAL: David010567 Will be working on the throttle and choke linkage next... [/quote] LOL
Posted on: 7/3/2012 8:08 AM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11141207

RE: TA 152H Meister Scale Project Grun 4
DD I think that's where the Pop Tart should go. That we're I have it in the Sea Fury with no problems. Send me the link to where you got the photos of the install. I need to see how he wired up his ESC. Hacker has dual positive and negative leads. Which has me confused. I'm use to Castle. Any help here is appreciated. Manual is worthless
Posted on: 7/2/2012 10:46 AM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11139960

RE: TA 152H Meister Scale Project Grun 4
Here the Lipos I am using...6.5X2X2 each. Not sure how I will stack them...CG depending...
Posted on: 7/1/2012 8:51 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11139368

RE: TA 152H Meister Scale Project Grun 4
We're going to have to do some spying on the Burley skunk works...I think there some big electrics going in his AOR. Get some ideas on mounting that motor.
Posted on: 7/1/2012 8:13 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11139327

RE: TA 152H Meister Scale Project Grun 4
Nice DD.
Posted on: 7/1/2012 8:00 PM by Author "pandissix" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11139312