|
tx causes my servos to glitch
Whenever i turn on my 900 mhz 1W video camera transmitter (from ng hobbies)while i have my 2.4 ghz rc transmitter (DX7) on, all my servos twitch and the range of the rc link is significantly reduced. I bought the 900 mhz system in the hopes that i would not have interference between the two systems. Does anyone have any advice to remedy this problem? Its seems like no matter how far away from the rc reciever i put the video TX they still seem to twitch(however if it is very close to the receiver the servos twitch to a much worse extent). i was told that the position and type of servos or a different type of antenna might be helpful but i am unsure.Any advice would be greatly appreciated. Thanks.
Posted on: 2/16/2010 10:23 AM by Author "panzertank"
in the forum "Aerial Photography and Video"
http://www.rcuniverse.com/forum/fb.asp?m=9509027
lose the connecters...lost the signal??
my fpv setup uses rca cables to connect the camera, video tx, and battery. if i were to cut these off these and hard wire the two ends together would i lose any performance in the system? is this a good idea, there really bulk and a pain to route throughout my plane also. any help is appreciated. thanks in advance -PN
Posted on: 12/18/2009 2:15 PM by Author "panzertank"
in the forum "Aerial Photography and Video"
http://www.rcuniverse.com/forum/fb.asp?m=9341290
RE: factory settings?
thanks for the help dude. much appreciated -PN
Posted on: 10/28/2009 1:32 PM by Author "panzertank"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9209406
factory settings?
what arw the factory mixutre setting on the fisrt gen moster gt (4.6)? thanks -PN
Posted on: 10/27/2009 2:14 PM by Author "panzertank"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9206324
rex head speed?
whats the absoulte highest head speed i can use on my trex 600 n (stock head, maverik G5 blades and align solid carbon paddles) that i should program into my governer? any help appreciated. i want to get the most out of this heli. thanks -PN
Posted on: 9/15/2009 10:38 PM by Author "panzertank"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9099112
RE: smallest for the weight...
great, yeah thanks for the help. i am looking into a camera system and im still trying to find out all the details for what plane to get. this is a big help though thanks -PN
Posted on: 9/6/2009 11:02 PM by Author "panzertank"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9075016
smallest for the weight...
whats the smallest plane i could get to carry at least 7 oz of weight?
Posted on: 9/6/2009 2:11 AM by Author "panzertank"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9073085
whats the best?
i have some electronics lying around from my crashed funjet that i would like to put together so i can have a flying plane (not a funjet). im not sure exactly what plane would work with them. any reccomendation would be greatly appreciated.(ps- i am only really interested in balsa- thanks) my electronics motor and esc- http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPVK6&P=7 servos-http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLGJ5 battery-http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXWUC4
Posted on: 9/3/2009 1:24 PM by Author "panzertank"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9067127
CA glue on cloth
is there anyway to get Ca glue off your clothes and not damage the clother themselves? i hate myself for accidently whereing a good pair of shorts down in my workshop only to find a drop of glue had made its way onto them. any sugesstions? thanks -PT
Posted on: 8/25/2009 1:56 PM by Author "panzertank"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=9043893
what is this???
when ever i bring my tmaxx up to speed (pretty much beyond 20-30 mph) is sways and swagger back and forth like a drunks at the wheel. its really kinda scarly i dont want it to crash at those speeds. can anyone help me? i just replace the servo saver so i dont thinks its that. let me know any help is appreciated
Posted on: 8/14/2009 1:01 PM by Author "panzertank"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9016134
blank fiberglass for 600
Ive been trying to find a blank (white) fiberglass canopy for my trex 600 so that i might have one of my friends paint me a custom paint job for it. so far i havent had any luck finding one. does anyone know where i might be able to get one of these if the exist at all? any help is appreciated.thanks -PN
Posted on: 8/8/2009 12:17 AM by Author "panzertank"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8999029
RE: Yamaha RMAX Crash - Killed a person
wow crazy stuff. thats things just so awesome looking though. . i wonder what kind of engine something like that has. has to be turbine for sure
Posted on: 8/8/2009 12:13 AM by Author "panzertank"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8999024
RE: upgrade
ill second R0bBeckett suggestion. a blade 400 would be a great next step for you
Posted on: 8/8/2009 12:10 AM by Author "panzertank"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8999016
RE: FUNJET
can anyone help me im having a serious problem with my funjet. the problem is stays constantly out of trim (as far as in the use of ailerons). when im at high power settings its torques over to the left rapidly and when im at low power settings it pulls to the right very quickly ever since i reattached an elevon it contiues to do this. i am at a loss for what do to. does anyone have and recommedations on what i should do? any help will be appreciated. thanks -PN
Posted on: 8/7/2009 3:10 PM by Author "panzertank"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8997862
RE: FUNJET
hey thanks for the help everybody. i think ill definitly take your advice chippedprop and put some hing pins in it if my hobbystores got some that will work. im glad i dont need to get a whole new airframe i can just fix this one. just to clarify, i didn't have to cut off any of the trailing edge of the elevon i just trimmed the frays off the front of the elevon where it meets the wing. thanks again -PN
Posted on: 7/29/2009 4:08 PM by Author "panzertank"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8974195
RE: FUNJET
the rest of the plane wasnt damage except this one spot. the elevon was ripped off because of a overly fast landing. after it was torn off i trimmed the frayed ends of the hing, thats why the cut looks so clean. the farthest part of the trailing edge that sits next to the elevon was also damged but was glued back on with ca and is secure. heres the pictures of the damge. let me know what you think. any help is appreciated
Posted on: 7/28/2009 7:55 PM by Author "panzertank"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8971815
RE: FUNJET
does anyone have a fix for a ripped off elevon on a funjet? or should i just scrap the whole airframe? let me know. thanks
Posted on: 7/27/2009 10:07 PM by Author "panzertank"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8969335
funjet aileron solution?
i recently crashed my funjet and one of the ailerons was ripped off. is there any way i can fix this?
Posted on: 7/26/2009 9:18 PM by Author "panzertank"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8966205
RE: Have you ever...?
no have you ever raced your rc car vs. a real car?
Posted on: 6/29/2009 11:16 AM by Author "panzertank"
in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8890638
compatible?
is this electric system http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPVK6&P=7 compatibile with this battery http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXWUC4&P=7. any help appreciated.
Posted on: 6/25/2009 12:37 PM by Author "panzertank"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8879965
RE: FUNJET
could you give a reccomendation as to what battery i should get? im using this http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPVK6&P=7 for a motor and esc.
Posted on: 6/21/2009 7:45 PM by Author "panzertank"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8869779
RE: FUNJET
is this too big a battery pack to use for a fj? Great Planes ElectriFly LiPo 11.1V 3350mAh 25C Power Sr
Posted on: 6/21/2009 7:06 PM by Author "panzertank"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8869713
powersystem
For a fun jet what is the maximum size and weight of a battery that can can be put in it. Im trying to find the most powerful one that will fit without comprimising performance.
Posted on: 6/21/2009 3:50 PM by Author "panzertank"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8869395
RE: Fiberglass or Foam???
im pretty sure that anything fiberglass would be better suited to high performance/speed than using a type of foam. but thats not to say there isnt some fast foam jets out there. whatever you decide both are pretty good choices, just a matter of what you want to spend.
Posted on: 6/19/2009 9:04 AM by Author "panzertank"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8864449
RE: FUNJET
hello everyone! Since i am going to be entering into the funjet craze i was wondering what setupi should use to get my plane flying (what servos, esc, motor battery ect...). Im really looking to get long flight times as i am going to use the plane for FPV. any suggestions will be greatly helpful in my final decision.
Posted on: 6/19/2009 9:01 AM by Author "panzertank"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8864443
Funjet setup?
i am going to buy a funjet as my next aircracft (for fpv use). What would you recommend for a setup?(what servos, esc, motor and lipo). Im all about long run time.any help or suggestions will be appreciated -alex
Posted on: 6/19/2009 12:22 AM by Author "panzertank"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8863928
RE: Range video system
does anyone have a reccomendation for what type of plane to use this system on? i was thinking a funjet. Any sugestions? -alex
Posted on: 6/19/2009 12:13 AM by Author "panzertank"
in the forum "Aerial Photography and Video"
http://www.rcuniverse.com/forum/fb.asp?m=8863912
RE: Tmaxx engine
moneys not too much of an object and im really just looking for reliability with some decent power.
Posted on: 6/15/2009 1:59 PM by Author "panzertank"
in the forum "RC Monster Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=8853902
Tmaxx engine
What ( in your opinion) is the best engine to run in a tmaxx?
Posted on: 6/13/2009 8:54 PM by Author "panzertank"
in the forum "RC Monster Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=8849795
RE: 2.4 wireless camera from nitroplanes.com
i had a simular camera that had intructions that said you could hook it up to a video camera to record. when i went to do this myself i found that it was impposible to get video. most likely our particular video cameras are not compatible with the reciver. thats my 2 cents.
Posted on: 5/12/2009 3:57 PM by Author "panzertank"
in the forum "Aerial Photography and Video"
http://www.rcuniverse.com/forum/fb.asp?m=8763133
| 
