RE: Which turbine?
look at my Eurosport with a K170.... [youtube]http://www.youtube.com/watch?v=Se8sOy4uG5k[/youtube]
Posted on: 9/3/2012 8:08 AM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11215621

RE: K-100
K100 is available !
Posted on: 7/31/2012 11:26 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11176065

RE: K-100

Posted on: 7/23/2012 12:46 PM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11166061

RE: Kingtech K-180
hello Guys, more reviews about the new K180?
Posted on: 7/17/2012 1:30 PM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11158914

RE: Diesel ECU Settings
hello Kansog witch 3S life do you use? Regrds
Posted on: 7/12/2012 9:20 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11152614

RE: REFERENCE SETTING K-140-F
Is you use DIESEL you can test ; Auto start +2 Start ramp 3 Glow plug 7.4V Start power at fuel ramp 160 RPM 100% starter power 16000 RPM off starter power 19000 RPM to reconnect starter 18000 RPM @ ingiton K003.000 RPM pump PW ignitionK 016 engine min flow 20% EGT pre heat 104 RPM pre heat K 05.000 RPM fuel ramp 006.000 preheat fuel 024% Ingition time out 27S start mode auto kero
Posted on: 7/5/2012 1:42 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11143509

RE: Lipo Fire in Workshop
hello I use this case for all of my lipo storage
Posted on: 6/28/2012 10:52 AM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11135213

RE: new jet legend yak 130
Hi ! Some news about the Yak 130...
Posted on: 6/26/2012 10:54 AM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11132553

FADEC DATA PARAMETER ECU MERLIN 160
Does somebody who have a Merlin 160 and an ECU V10 can give me his parameters? Menu Start : Auto + : ? Pump Start Ramp : ? Glow Power : ? Low Batt : ? Start Power Ignit : ? Starter Power Fuel Ramp : ? RPM 100% Starter : ? RPM Stop : ? RPM Reconnect : ? RPM Ignition : ? Pump PW Ignition : ? Engine Min Flow : ? EGT End : ? RPM Preheat K : ? RPM Fuel Ramp : ? Preheat Fuel : ? Ignit Time Out : ? Start Mode : ? Menu Run : Full Power : ? Idle SPeed : ? Stop Peed : ? Start Min : ? Max temp : ? ACC DELAY : ? DEC DELAY : ? Stability Delay : ? Pump Limit : ?
Posted on: 6/25/2012 8:08 AM by Author "passagealanglaise" in the forum "Merlin Turbine Clinic"
http://www.rcuniverse.com/forum/fb.asp?m=11130969

REFERENCE SETTING K-170-F
KINGTECH K170-F Factory Menu Start : Auto +2 Pump Start Ramp 5 Glow Power 7,4V Low Batt 7V Start Power Ignit 150 Starter Power Fuel Ramp 150 RPM 100% Starter 16000 RPM Stop 19000 RPM Reconnect 18000 RPM Ignition 5000 Pump PW Ignition 18 Engine Min Flow 30% EGT End 120°C RPM Preheat K 5000 RPM Fuel Ramp 5000 Preheat Fuel 45% Ignit Time Out 27s Start Mode AUTO KERO Factory Menu Run : Full Power 123000 Idle SPeed 34000 Stop Peed 20000 Start Min 100°c Max temp 840°C ACC DELAY 7 (possible without any problems to low as 4, even lower depending the elevation) DEC DELAY 4 Stability Delay 100 Pump Limit 600 Review Data : Menu Start : Auto +2 Pump Start Ramp 5 Glow Power 7,4V Low Batt 7V Start Power Ignit 150 Starter Power Fuel Ramp 150 RPM 100% Starter 15000 RPM Stop 20000 RPM Reconnect 19000 RPM Ignition 3000 Pump PW Ignition 17 Engine Min Flow 30% EGT End 120°C RPM Preheat K 5000 RPM Fuel Ramp 6000 Preheat Fuel 30% Ignit Time Out 27s Start Mode AUTO KERO Factory Menu Run : Full Power 123000 Idle SPeed 34000 Stop SPeed 20000 Start Min 100°c Max temp 840°C ACC DELAY 4 DEC DELAY 4 Stability Delay 100 Pump Limit 600
Posted on: 6/8/2012 4:06 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11072821

REFERENCE SETTING K-140-F
Menu Start : Auto +2 Pump Start Ramp 5 Glow Power 7,4V Low Batt 7V Start Power Ignit 130 Starter Power Fuel Ramp 110 RPM 100% Starter 17000 RPM Stop 20000 RPM Reconnect 18000 RPM Ignition 3000 Pump PW Ignition 18 Engine Min Flow 50% EGT End 120°C RPM Preheat K 5000 RPM Fuel Ramp 6000 Preheat Fuel 45% Ignit Time Out 27s Start Mode AUTO COR Menu Run : Full Power 122000 Idle SPeed 33000 Stop Peed 20000 Start Min 100°c Max temp 840°C ACC DELAY 8 at the beginning, and now at 6 and it's perfect DEC DELAY 5 Stability Delay 100 Pump Limit 448
Posted on: 6/7/2012 1:49 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11072743

RE: REFERENCE SETTING K-140-F
Tank yoy Barry for you reply Now, I had decrease de acceleration delay to 6 and it's perfect. Under, I had hiring a little growling noise. This Engine run very well.
Posted on: 6/7/2012 1:47 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11109717

RE: REFERENCE SETTING K-140-F
halo....
Posted on: 5/29/2012 1:43 PM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11098895

RE: Jetlegend 1/6 Scale F16
Maiden fly last week with my F-16 ( 8 fly today...) Just have some trouble (leak) with the little retract Lock Stroke...
Posted on: 5/22/2012 12:45 PM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11090684

RE: REFERENCE SETTING K-140-F
Does somebody can compare his setting with mine? Regards
Posted on: 5/13/2012 2:18 PM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11079404

RE: REFERENCE SETTING K-170-F
ok same as me I will test your setting next week end Thank you very much
Posted on: 5/13/2012 9:54 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11079169

RE: REFERENCE SETTING K-170-F
thank you very much ! With this setting your run on Diesel or Kerosen?
Posted on: 5/13/2012 9:27 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11079134

RE: REFERENCE SETTING K-170-F
hello Does somebody can compare his K170F setting with mine? Regards
Posted on: 5/12/2012 10:49 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11078091

RE: REFERENCE SETTING K-170-F
Guys what do you think about this data : RPM Ignition 5000 RPM Preheat K 5000 RPM Fuel Ramp 5000 Strange no?
Posted on: 5/10/2012 3:03 PM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11076202

RE: REFERENCE SETTING K-170-F
I will edit the first post
Posted on: 5/8/2012 11:40 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11073188

K-170 first run & fly
Hello this week end was the first run of the K-170F and the maiden fly with the EUROSPORT CARF [youtube]http://www.youtube.com/watch?v=JIMBh3shXaE&feature=plcp [/youtube] & the first landing... [youtube]http://www.youtube.com/watch?v=YpXoNkp47Uc&feature=channel&list=UL [/youtube] Very plaisant turbine like the K-140F !
Posted on: 5/8/2012 9:31 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11071359

RE: REFERENCE SETTING K-140-F
[youtube]http://www.youtube.com/watch?v=yyONsjjlTAM[/youtube]
Posted on: 5/8/2012 9:30 AM by Author "passagealanglaise" in the forum "KingTech Turbines International"
http://www.rcuniverse.com/forum/fb.asp?m=11073043

RE: 4th gen A-10 by Mibo jets
Stan... Your are a real psychopath
Posted on: 4/22/2012 4:30 AM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11051877

RE: Kingtech K140E testing
21kg at takeoff... My CG is at 150cm now... [youtube]http://www.youtube.com/watch?v=8En-sehcC1Y[/youtube]
Posted on: 2/19/2012 11:00 PM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10966978

RE: Kingtech K140E testing
Today a K140F on a L39 jetlegend ..... [youtube]http://www.youtube.com/watch?v=II-xe_nfHQo&context=C3a4f3adADOEgsToPDskL3xvraUf-_Z2ekdxLWOPU0[/youtube] and [youtube]http://www.youtube.com/watch?v=OMr4v2oZdxc&feature=channel[/youtube]
Posted on: 2/19/2012 12:36 PM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10966200

RE: What do you think about JETLEGEND L39?
Today, my L-39 with Kingtech K-140F [youtube]http://www.youtube.com/watch?v=II-xe_nfHQo[/youtube] [youtube]http://www.youtube.com/watch?v=OMr4v2oZdxc&feature=channel[/youtube]
Posted on: 2/19/2012 12:20 PM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10966180

RE: Kingtech K140E testing
I had tested mine (I have 2 K140f and one K170F) At 623ft I have 31lbs at 120 000tr/mins
Posted on: 2/17/2012 11:42 AM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10963363

RE: Kingtech info requested
hello An example of starting : [youtube]http://www.youtube.com/watch?v=WPMK_qzavbg&feature=g-upl&context=G2e7fa28AUAAAAAAAFAA[/youtube] And an example of flight.... [youtube]http://www.youtube.com/watch?v=FiX3dVLU9go&feature=g-upl&context=G2384510AUAAAAAAAGAA[/youtube]
Posted on: 1/19/2012 4:03 AM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10916671

RE: What do you think about JETLEGEND L39?
I'm using a Kingtech K140-F and it's really perfect !
Posted on: 1/18/2012 8:44 AM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10915130

RE: Loaded Eurofighter build thread

Posted on: 1/17/2012 11:25 AM by Author "passagealanglaise" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10913683