|
RE: swashdrive jetboat
i mate could you send me the thread or pics thanks phil
Posted on: 9/4/2012 2:16 PM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11217376
RE: Stuff tube help please!
maybe you could cut it down the centre a inch through it if you have some spare at the engine end then pull back both sides and maybe clamp it to the stuffing tube if you have enough room to stop it movin forward
Posted on: 9/3/2012 2:26 PM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11216038
RE: swashdrive jetboat
thanks mate hes sending one to me
Posted on: 9/2/2012 5:37 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11214261
RE: swashdrive jetboat
www.youtube.com/user/phillio35boats link to first test had prob with coupler but ok
Posted on: 9/1/2012 1:16 PM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11213669
RE: swashdrive jetboat
hi all got pump today from jettec cost me another 130 £ customs nice so the unit cost me all in 590£ cheap not.anyway besides all that the pump is a nice bit of kit on adams part from jettec .i started today as well from the instructions adam sent with the pump told me to put stator where two halfs join to put level with the transum because theres no gasket like with the swashdrive pump but that would mean another 3 quarters of inch towards the front of the boat but i didnt go with that so did it like it should be like on the swashdrive hull same as diko,s from rcu but theres no gasket so had to fill with silicon dont like the look of it mind thats the only way could of done it so heres some pics.
Posted on: 8/31/2012 2:40 PM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11212882
RE: swashdrive jetboat
yes i will give you the sizes when the pump is here that picture was when adam sent to me 3 days ago ready for sending
Posted on: 8/25/2012 12:47 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11205224
RE: swashdrive jetboat
heres the pump
Posted on: 8/24/2012 10:48 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11204587
RE: swashdrive jetboat
the pump is a jettec pump adam sent it thursday nice bloke to deal with .dana what is the cog on this davette sprint just to be sure
Posted on: 8/24/2012 12:20 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11204192
RE: swashdrive jetboat
thanks mate not as reflective as it should be but does the job
Posted on: 8/23/2012 10:43 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11203537
RE: swashdrive jetboat
just got boat back been painted chrome and my roll bar been fitted pump is on its way
Posted on: 8/23/2012 7:46 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11203299
RE: sigma 51 version 2
is it the new one version two or old one? ive got the same problem i had to lower the engine down as far as i could get it also centre of gravity is 460 mm .where is your fuel tank? should be behind engine
Posted on: 8/10/2012 12:49 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11187862
RE: sigma 51 version 2
could you get me some pics of the setup and was that the v2 thanks mate also have your mate got his pump from jettec yet
Posted on: 8/4/2012 1:45 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11180457
RE: sigma 51 version 2
hi hendrix you mean front or back stracks and by how much
Posted on: 8/4/2012 1:42 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11180456
RE: sigma 51 version 2
someone said they dig in on a right hand turn and they dont come out of a turn unless you back down of the throttle also the freeboard is to thin acts like a turn fin
Posted on: 8/3/2012 8:48 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11179615
sigma 51 version 2
any one got one and what setup are you runing and how does it perform
Posted on: 8/3/2012 2:02 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11179348
RE: swashdrive jetboat
sorry mario still waiting for the pump from jettec should be soon i will post pics when it comes
Posted on: 7/22/2012 12:07 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11164170
RE: swashdrive jetboat
sorry bit small pics
Posted on: 7/21/2012 8:03 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11163446
RE: swashdrive jetboat
just been on mhz website and they have a new jetdrive any one got one or no what there like
Posted on: 7/21/2012 7:59 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11163441
RE: swashdrive jetboat
i got the header from carmen at need for speed hobbies canada cheaper to get done there than get one done in england didnt take long to get here
Posted on: 7/2/2012 8:21 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11139785
RE: swashdrive jetboat
thanks for all the input im waiting for the pump from jettec do you know any one else whos got a pump from adam or waiting for one .also what size is the hull in the pics diko mines the davette 34" would mine be 29% just over 9 inches
Posted on: 7/2/2012 8:12 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11139768
RE: Zenoah No spark But then come back!
take off fly wheel and see if woodruff key is brock or missing i had same problem
Posted on: 6/30/2012 1:22 PM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11137854
RE: swashdrive jetboat
hi all just update on buid got boat today waiting for pump from jettec
Posted on: 6/30/2012 1:18 PM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11137848
RE: swashdrive jetboat
hi all radio box all done and engine all ready to be placed in davette sprint boat when she gets here
Posted on: 6/25/2012 11:06 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11131247
RE: Gas Jet Boaters
You can make it fool-proof .. 2 CMB-90 couplers and 6mm solid-shaft in between. I can make you one ... cheap ! 30AUD incl. shipping And to get you guy's jealous .... look what's even allowed in the livingroom. The crew from the roundnose are a little ''out of fashion'' .. but they fit nicely. hi hendrix did you get my pm on the couplers
Posted on: 6/24/2012 2:37 PM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11130082
RE: Gas Jet Boaters
looks good mate im waiting to build one cant wait
Posted on: 6/23/2012 7:58 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11128721
RE: swashdrive jetboat
will keep updated when every thing gets to me and i start the build guys
Posted on: 6/23/2012 7:28 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11128699
RE: swashdrive jetboat
ha ha thanks for that dana dont no what happened there boat looks good mate
Posted on: 6/22/2012 6:41 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11127578
RE: swashdrive jetboat
hi just a start to my build dana sent me a picture of boat out of mould
Posted on: 6/20/2012 1:25 PM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11125579
RE: FIRST CLASS PAINT
mate your an artist mate heres one i had in uk cost me 300gbp is it set price or are they different ,phil
Posted on: 6/15/2012 12:29 PM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11119402
RE: swashdrive jetboat
just got money back on hk pump and ordered a pump from jettec nz it looks the dogs b.......s
Posted on: 6/12/2012 11:54 AM by Author "phillio35"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11115756
| 
