|
RE: Classifieds Haggling Question
Ok so lets say you make an offer for the full asking price shipped and the person Rejected with Revised Offer Requested and you do another offer exactly like that person asked for... done deal right...Now some one else offers that person more $ than he has agreed upon with you and he takes that amount. And there was 10 hours between the two offers
Posted on: 2/1/2012 7:13 PM by Author "pjacq"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10939452
RE: welding batteries
I built the transformer typ for spot welding tabs on my battery's and for welding some stainless turbine pipes.It works good but I have found A better welder design you should check it out.. Paul http://frikkieg.blogspot.com/
Posted on: 8/21/2011 6:54 PM by Author "pjacq"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=10680805
RE: Fuel system plumbing and air trap consideration
I have seen my friends ultra bandit uat almost flat when running at full throttle with a p180 and thought about using some .25 fittings and tubbing to plum the tanks and switch one of the fittings on the uat to .250 that would be the best solution.
Posted on: 11/7/2009 6:01 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9236031
RE: JR 12X Owners - Upgrade your battery pack to Eneloops
Well got the welder made and it worked great here are some pic of it. [image][/image]
Posted on: 9/26/2009 11:47 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9125332
RE: JR 12X Owners - Upgrade your battery pack to Eneloops
I found the eneloop batterys on this web site is this a good price for them....... $9.97 http://www.thomasdistributing.com/shop/sanyo-eneloop-aa-2000-mah-4-battery-pack-brultra-low-discharge-nimhbr1-free-4-cell-battery-case-p-287.html?id=50&osCsid=a98rm8a91donrsllit8gi3gna7 Looking at making a tab welder like a spot welder for doing the packs has aney one done this yet.. Paul
Posted on: 9/21/2009 11:01 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9114096
RE: Festo / SMC Fittings In the air lines
Festo makes 1/8 fitting too .
Posted on: 5/9/2009 7:47 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8755084
RE: Avonds F-15
I dont have that file for that one.I think the wood kit you would have to get from jet hanger hoobys if they sell it. The kit you have is the fist avons plane and it is diferent then the wood file I have. Thanks Paul
Posted on: 12/23/2008 11:04 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8274476
RE: Avonds F-15
I could cut a set for you let me know what parts you would like and I will fire up the laser.. Paul
Posted on: 12/20/2008 10:03 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8266137
RE: Where would I go to get a JR Servo Spline "broach"
check out this type of broaching for cnc lathes http://www.rotarybroaching.net/broaching101.htm
Posted on: 11/7/2008 11:28 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8123698
RE: Avonds F-16 build
Whare is the cg for the plane I have done some work on one and need the to rebalance the plane . thanks Paul
Posted on: 7/21/2008 1:23 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7755228
RE: Clunk question
the skymaster clunks that I turnd down are brass and will not rust. Dubro and sulivan large clunks fit in the fittings just fine if you don't want to take the chance.
Posted on: 7/7/2008 9:50 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7705094
RE: Toledo Friday Jet Photos
the big f16 All the flight controls are hinged with gropner point hinges and use a ball arm on the servo with a plastic block with a slot glued into the surface to move the surface's. Below are the F16. The prices are : 1 x Fully-moulded composite kit 4550 Euro 1 x Complete scale main landinggear, with wheels and brakes 2200 Euro 1 x Complete scale nosegear with oleo wheel and tyre 1000 Euro 3 x moulded fuel tanks 295 Euro 1 x Bypass and SS Tailpipe 320 Euro 1 x Superscale aluminium exhaust nozzle 475 Euro 1 x F16 centreline tank with pylon 120 Euro 2 x F16 wingtanks (pair) with pylons 210 Euro 1 x Pilot 1:5 (very nice one) 180 Euro 2 x Speedbrakeset with cylinders 300 Euro 1 x Parachute 150 Euro 1 x Set Photos and Documentation 100 Euro 1 x Decals 95 Euro 1 x cocpit set 150 Euro Packing and shippingcost are not included.
Posted on: 4/6/2008 3:39 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7341931
RE: Skymaster tanks warning
Im just going to ship his first shipment today of 18. I ran out of some off the parts and couldn't make them fast enough for jet tec.
Posted on: 2/29/2008 2:00 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7156264
RE: Skymaster tanks warning
I make the fittings and sell them to jet-tec and Dreamworks. Paul Jacques
Posted on: 2/29/2008 1:18 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7156114
Skymaster tanks warning
I am doing service on an f18 and noticed the clunks were not moving. So I took the tanks apart and found that the tygon supplied with the kit got super stiff and they would barely move. I decided to put some new oring type fittings in and get ride of the leaky black ones. The fittings fit the hole with out modifying the tank.
Posted on: 2/29/2008 1:15 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7156050
RE: FeiBao MB-339 in flight breakup
pic
Posted on: 1/30/2008 6:17 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6994840
RE: SkyMaster MB339 Build Thread
I building a Fei Bao MB339 and Im going to try and get the turbine as far forward as possible to reduce the 3 ½ to 4lbs of lead in the nose. My friends mb339 crashed after the nose left the plane doing a normal high G pull up and bank. Hear are some pic of the progress so far.
Posted on: 1/19/2008 11:23 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6933117
RE: Elan Has Arrived!
I can sell them to you for 115.00 each pluse 10.00 shipping Or you can order them through jet tec.
Posted on: 10/28/2007 8:01 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6551103
RE: Elan Has Arrived!
I got the tank from jet -tec and it lookes great and fits like a glove and hold 125 oz thanks Gary.
Posted on: 10/28/2007 7:14 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6550875
RE: Elan Has Arrived!
I made 3 plug's for the kevlar tank and sent them to Gary at Jet-tec one is about 140+ oz one is 125 oz and one is about 110 oz. How big of fuel capacity are you guys going to need for the elan???? what turbines are you going to be using?? Lets hear from you so we can make it the most papular size. Thanks Paul
Posted on: 10/21/2007 7:51 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6518291
RE: Reaction 54 Jet Kit
I called SWB and they are still making the Mamba turbine and have spare parts to service them. The Bad thing about the Mamba is it is only 11.5lbs of thrust I wonder what it would put out at 160,000 rpm. The good thing is it should never need to get service unless for some thing stupid that I might do like crash. I think Im going to call and see if I can get them to make mine a true auto start so I don’t have to carry the hand start switch and car battery in my flight box. I could use some more nose weight so I will put the car battery in the nose to run the ecu and the starter. Paul Jacques [quote]ORIGINAL: Woketman Does SWB still make the Mamba? Seems we rarely hear anything about them. [/quote]
Posted on: 1/28/2007 10:03 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5334791
RE: Fuel stopper improvement !!!!
The brass sleeve I have put on the outside of the tank by mastake and it worked fine. Paul [quote]ORIGINAL: 3DHELINUT The brass threaded sleeve gets aeropoxied from the inside of BVM kevlar tanks. the tank stopper threads into the brass sleeve and allows easy replacement of your pickup line. [quote]ORIGINAL: BlackCloud Looks nice and more durable. I see the brass ring but not sure how you secure the fitting to the tank? [/quote] Alan [/quote]
Posted on: 1/24/2007 7:16 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5315008
RE: Fuel stopper improvement !!!!
Jet-Tech fuel tanks can now be bought with this o-ring style fuel system as an option .So now you can get the larger clunk in your tank and have the versatility too.
Posted on: 1/23/2007 10:56 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5313978
RE: Reaction 54 Jet Kit
The mane's are the Trailing Link Struts - Short J1A-TLSS and the Trailing Link Nose Strut is J1A-TLNS. if you look close at the brake line holders on the manes they are kinda nice to. thanks Paul
Posted on: 1/23/2007 10:44 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5313909
RE: Reaction 54 Jet Kit
I have just finised my 54 except for setting up the throws and the balance.It has a mamba 11.5lb for power with jr radio and robart 530 on the mains with the jetpower struts from dreamworks.I tryed to keep it simple for my winter flyer of the frozen lake that I live buy. Paul Jacques [image][/image]
Posted on: 1/21/2007 9:11 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5296256
RE: Reaction 54 Jet Kit
I don't know if they still make the Mamba ive had this one for years now.I should give them a call and see if they still have parts for them. [image][/image]
Posted on: 1/21/2007 9:09 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5298853
RE: Fuel stopper improvement !!!!
The brass ring has to be glued in the tank so it would be the best if the tank is new when installing it.Im going to drill out my king cat tanks and glue the ring on the out side of the tank.I made the ID of the brass ring .53 large enough for the large du-bro clunk to be installed. Paul Jacques
Posted on: 12/19/2006 7:44 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5134292
Fuel stopper improvement !!!!
Ive looked at all the other companies types of fuel stoppers. I came up with my own improved type of stopper. It will fit a large drobo fuel clunk and any 5mm type festo fitting. Take a look and see what you think and let me know. Paul Jacques
Posted on: 12/18/2006 11:48 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5133622
RE: Avons Twin P-60 F-15
I ordered the turbines when in Florida after witnessing the karo start on the p-60s.I decided to go that route to avoid the possibility of one turbine running and the other one trying to start and pumping the fuse full of power max.I got the turbines and got them running great no flames except one starter would stick and shoot out when trying to start so I called Bob and he told me that the ecu had to be updated. New turbines ordered with the karo start and the ecus need up dating so back to jet cat they go. So I got the ecus back and for some reason they now on start up would shoot a yellow flame out the back of the plane. So the up date for some reason changed some thing on the start process witch caused them to have a flame start. After some call’s to Bob and adjusting the pump setting’s and a lot more of the fire starts. It cam down to sending the turbines back to Bob for him to sort out or go with power max to start. Are summers are short and the weekend was looking good so I did not want to waste any more time trying to get them running with the karo start.To my surprise they seamed to start using vary little power max and no more fire starts. If some one has had this problem with there p-60 karo start and sorted it out I would put it back on and give it another try. Maybe I will look at the next jet meet to see the if some one will let me see the settings and the way there turbine starts. Paul
Posted on: 4/23/2006 1:04 PM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4200226
Avons Twin P-60 F-15
Will The twin Avons F-15 I built did its maiden and it flew grate with twin p-60 for power.After some trouble with the karo-starts on the p-60 I decided to go to the power max and they start great now.Hear are some pic of the plane and the happy owner. Paul Jacques
Posted on: 4/23/2006 10:50 AM by Author "pjacq"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4199800
| 
