|
RE: game
thats funny...i played it.
Posted on: 11/2/2009 9:44 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9223872
RE: MHZ Shockwave-M Thread
hey ryan...i like the video. it looks faster than when i had it. mike
Posted on: 10/30/2009 6:31 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9215983
RE: MHZ Shockwave-M Thread
hey guys just a thought but will a trim tab with the same style turn fin on the right side help this at all. or is the rudder still to long? the boat did do the same when i hade it but i think maybe less because i used neavy cells. but if you lean it over fare in the right turn it would blow the back out. ...mike
Posted on: 10/24/2009 2:32 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9198658
RE: MHZ Shockwave-M Thread
hey ryan...ran my skater today. motor temp was 405 lol. esc was very hot to. did you ever get it figured out? mike
Posted on: 10/23/2009 8:59 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9197165
RE: 1/12th miss t-plus FE hydro production?
started the mold repair today. block sanding when dry. should have it ready soon.
Posted on: 10/20/2009 7:01 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9188630
RE: 1/12th miss t-plus FE hydro production?
if you ever make a mold from ABS plug with polyester resin you better use pva after the coats of wax. if not your part will be eaten by the gelcoat and stick to the mold to no end. thats what ended up happening to my lower hull that is now junk. the only reason the other parts came out ok was i used 9 coats of wax with 3 coats of pva. this will never happen again after what this cost me. the mold may be saved if i can get the other parts out. the mold will need extensive work to be ready for parts. again....sorry
Posted on: 10/20/2009 3:41 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9181587
RE: 1/12th miss t-plus FE hydro production?
man i bet that was fun getting that hull apart. the sponson opening is 1 1/2 then it drops down the step of the sponson. blus the cockpit has lots of room for another 2 lipos stacked. thanks...mike
Posted on: 10/20/2009 3:40 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9165648
RE: MHZ Shockwave-M Thread
hey ryan...take a look at the speed control programing. remember i ran it on nimhi so everything is set to max with no lipo voltage cutoff. try that and see what happens. mike
Posted on: 10/19/2009 1:45 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9184417
RE: MHZ Shockwave-M Thread
thats weard...it never ran that hot here and the water is hot 81-85 ...mike
Posted on: 10/19/2009 1:45 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9184454
RE: 1/12th miss t-plus FE hydro production?
yeah thats what i figured it did. maybe slower when i had it. the only boat i have now is a mrp skater that im going to start running. would of hade the t-plus but[:'(] lol. will have the mold ready soon though. thanks again...mike
Posted on: 10/19/2009 1:09 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9184400
RE: 1/12th miss t-plus FE hydro production?
hey ryan...man that thing looks sweet. im really happy you like it. i bet its much better on lipos then it was on heavy nimh. any idea how fast it is now? thanks..mike
Posted on: 10/19/2009 12:35 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9184339
RE: 1/12th miss t-plus FE hydro production?
hey ryan...thanks man, its hard but may still work out. hey hows the fountain running. wish i still had that boat it was a blast to run. thanks...mike
Posted on: 10/18/2009 2:18 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9182984
RE: 1/12th miss t-plus FE hydro production?
hey guys...its looking better but now its more work for me that i really cant afford. im going to start the top deck and use the pva for sure. wish me luck lol. thanks...mike
Posted on: 10/18/2009 2:16 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9182982
RE: 1/12th miss t-plus FE hydro production?
makes me sick but ive gotten some parts out. mold like i thought needs lots of gel work. should be able to fix though things are looking a little better after 3 hours of pulling, cutting, hammering, chisleing.
Posted on: 10/18/2009 1:31 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9181922
RE: 1/8th Scale hydros at HOTMBC
sweeeeeeet! love the pics. i like the look of the old hydros.
Posted on: 10/17/2009 11:26 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9181726
RE: SHOW UR BOATS PEOPLE
my boats....
Posted on: 10/15/2009 11:34 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9176972
RE: 1/12th miss t-plus FE hydro production?
your exactly right....now i just need to get the thing done lol. will see what turnsout when the lower hull is pulled from the mold. thanks...mike
Posted on: 10/15/2009 4:18 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9175919
RE: Midwest Tri-Squire
ACS, What combination of electric motor, ESC, and batteries are you using? I've decided to go with a non slimer for my Tsquire. Thanks, Bill
Posted on: 10/15/2009 11:38 AM by Author "Pro from Dover"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=9175228
RE: 1/12th miss t-plus FE hydro production?
i will just use clay to fill it in just in case somebody wonts it like the t-plus was setup with the factory cg and all. thanks again...mike
Posted on: 10/15/2009 12:33 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9174432
RE: 1/12th miss t-plus FE hydro production?
good idea eboat. thanks...mike
Posted on: 10/15/2009 12:20 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9174406
RE: 1/12th miss t-plus FE hydro production?
got the hull layed up late last night in to the morning. the hardest parts is the double wing boxes in the rear section of the hull. i should have made theme solid for the plug but didnt wont to hurt the abs hull. oh well if it doesnt come out right i will just make a new one. thanks...
Posted on: 10/14/2009 7:27 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9173653
RE: Show Off Your Ride!!!
my old junk lol....
Posted on: 10/12/2009 5:41 PM by Author "maverick pro"
in the forum "Off Topic Forum - Boats"
http://www.rcuniverse.com/forum/fb.asp?m=9167464
RE: 1/12th miss t-plus FE hydro production?
ok pulled the parts out the mold tonight. now need to wet sand the mold for actual fiberglass parts to be pulled. on to the hull now....
Posted on: 10/12/2009 12:13 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9165550
RE: 1/12th miss t-plus FE hydro production?
hey eboat...31 inch long x 14 inch wide. thanks...mike
Posted on: 10/11/2009 2:45 PM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9164067
RE: robin r2160 arf
HI pimmnz ok that's good it has thunder tiger G-90 on it thanks for the info
Posted on: 10/11/2009 1:10 PM by Author "blade pro"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9163853
robin r2160 arf
[size=4][size=2]HI I'am in need of some help to find[size=2][/size] a manual for the robin r2160 67" wing span not sure of the weigth of the plane a friend gave it to me so I'am trying to find the cg and the right motor size for this plane I have looked I found one but it was a 87" wing span but it did not have a manual to view any help would be great thanks much blade pro
Posted on: 10/11/2009 12:31 PM by Author "blade pro"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9162919
RE: 1/12th miss t-plus FE hydro production?
i dont miss doing this at all lol fin set and cowl layup.
Posted on: 10/11/2009 2:54 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9163112
RE: robin r2160 arf
HI pimmnz thanks for that info this is the only the second gas/nitro plane for me I fly mainly brushless planes thanks agian blade pro
Posted on: 10/11/2009 12:36 AM by Author "blade pro"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9162973
RE: diy cheap boat mold? help
check my thread out called 1/12th t-plus hydroplane. im doing it now and just started the waxing. thanks...mikw
Posted on: 10/9/2009 2:14 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9158431
RE: 1/12th miss t-plus FE hydro production?
started the waxing on the cowl and rear fins. next the hull and deck. soon will start the pva then gelcoat and first layer of glass. thanks...mike
Posted on: 10/9/2009 2:12 AM by Author "maverick pro"
in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=9158428
| 
